CALIMET CM9-780B Wireless Camera Instruction Manual

Table of Contents

CALIMET CM9-780B Wireless Camera Instruction Manual

Camera, transformer, bracket, antenna, screw kit, instruction manual

A. Attach antenna to the back of the camera and turn clockwise

B. Plug cable into an electric outlet. Voltage range: 100V-250V AC

For apple phones, search Smartgate on Apple Store, and then download
For Android phones, search Smartgate on Google Play, and then download

Connect using WIFI

Use a pen to press the reset button on the back side of the camera transformer for 8 seconds.
Go to Settings on your phone, turn on Wi-Fi, and in the wifi section, search and connect with the wifi name “SmartDoor”.
Open the Smartgate APP and click the plus button on the right upper corner
It will connect automatically and take you to the wireless network settings page
Enter your camera name, or choose “My Door” as default
Enter WIFI name and WIFI password then press binding device.
You should see a “binding success” popup message if your wifi name and password was entered correctly. Press the “OK” button.
Press the back button the top left to return home.
Your camera will appear. To prevent a mismatch, wait a few seconds until the status message says “Connected”. Once connected, tap on the picture of the house to view the camera.

Follow the same WIFI procedures above for an ethernet connection.

If you are having trouble connecting the Smartgate app to the camera, check to make sure your firewall or router is not blocking the connection. Certain routers have built-in security features that you may need to configure to allow the camera to connect.
This camera is not compatible with 5Ghz routers.
Make sure bluetooth and wifi (local network) are granted permission on the Smartgate App

Open the black cover of your gate opener, look for the circuit board.
In the smartgate APP, click on the camera to open the live video
On your gate opener circuit board, look for and press the study button for about 2 seconds until the flashing light becomes solid and then stop pressing it.
Press the open button on the Smartgate app multiple times (and fast), until the gate is moving.
Note: The study light on the circuit board should be a solid color (not flashing) while you’re pressing the open button. If not, repeat step 3.
Connection complete.

Open the menu on the upper left corner, then press “My Circle” .
Press “Add” on upper right corner, enter other user’s account information.
Other user’s account appears when complete.
Go back to the home screen and choose the camera that you would like to share, then click settings .
Click on the gray circle next to the user’s account that you would like to give access to.
The blue check mark means account now has access.
- The account that is being added can open/close gate and view live video, but is not authorized to share the video with others.
- Click the blue check button to disable the sharing option.

Go to the Home Screen
Press the Rewind Button
Select time frame, the selected button becomes blue
Press Start button (delay may occur based on your wifi speed)
The camera comes with 32gb memory card. It can be upgraded to a 64gb memory card.

If the camera and app were working fine before, but is now experiencing problems, follow the instructions below:

Sign out – sign out of the app and sign back in
Force close the app – On the Iphone home screen, swipe from the bottom left to the top, and locate the smartgate app, and swipe up to force close the app. In android phones, go to setting apps locate the smartgate app force stop. After force closing, re-open the app and see if the problems resolve.
Check that Wifi and Bluetooth are turned on – In your settings, check that wifi and Bluetooth are turned on, and airplane mode is turned OFF.
Update to the latest version – Go to the app store or google play store and update the Smartgate app to the latest version if you haven’t already.
Alternatively, you can visit the links below to update:
a. Iphone: https://apps.apple.com/us/app/smart-gate/id1440418448
b. Android: https://play.google.com/store/apps/details?id=www.calimet.com.calimet
Delete the camera – Delete the camera from the smartgate app and then re-add. Cameras can be deleted by pressing the gear icon in the home screen, and then press the Remove Device button. Follow the instructions starting from STEP 4 to re-add the camera to the Smartgate app