SAMEBIKE XWXL09 Lithium Electric City Folding Mountain Bicycle User Manual
- June 4, 2024
- SAMEBIKE
Table of Contents
SAMEBIKE XWXL09 Lithium Electric City Folding Mountain Bicycle
importing warning
- This manual includes important safety performance information and service information. Please make sure you have read the following warning content before the first time you use our product.
- If you borrow your electric bicycle to other people, please let the user read this manual, it could help to decrease the risk of accident.
- Please wear a suitable and safe helmet before riding, please wear clothes with fluorescent and reflective stripes when you ride at night. Don’t exceed speed limit, it is a main reason of traffic accidents, we should abide by the traffic rule, we shouldn’t exceed the speed limit.
- Don’t touch the charging hole on the bike, or use metal touch it, otherwise,the accident will be caused by the transient short circuit of the current.
- Zero starting, braking frequent, driving against the wind, carrying people or anything, insufficient air pressure on the tires. All of these will use much electric energy, and then reduce the endurance mileage. If you want the best endurance mileage, please do something as follows:
- please use assist mode.
- on the premise of safety, don’t brake frequently or use zero starting.
- Don’t overload.
- Before riding, please check the pressure of the tire, and supply enough pressure.
- Our Ebike should avoid prolonged exposure to the sun or rain , avoid storage in places with high temperature or corrosive gas, so as to avoid electroplating parts and paint surface by chemical corrosion and electrical parts damage, resulting in operational failure and accidents
- Your current insurance business may not cover the situation you may encounter when riding a electric bike, please contact your insurance company or insurance broker for relevant consultation
- According to the law in China, riding an electric bicycle or a three-wheeled Electric bike must reach the age of 16. If you use this product in other countries, please refer to the local laws and regulations.
- Bicycles are vehicles with certain risk fact factor , please be sure to abide by the traffic rules. At the same time, when emergency braking , brake the rear wheel first, then brake the front wheel, when cycling speed is too fast. There is a danger of tipping over if you brake the front wheel suddenly, please ride carefully.
Product Components
- SADDLE
- SEAT POST
- MOTOR
- WHEEL CHAIN
- CRANKSET
- PEDALS
- SUSPENSION
- FOLDER
- BATTERY
- MIDDLE LCD DISPLAY WITH USB( LED FOR STANDARD VERSION)
- STEM
- FRONT LIGHT
- SUSPENSION FRONT FORK
- DISC BRAKE
- TIRE
Folding Method of Product
Method of Product assembly
Tools preparation
Install handlebar and adjust seat tube
Mudguard and headlight installation
Installing the front wheel
Mounting pedal
The method of removing the battery
(The battery of Standard version can’t be removed)
Product instruction
Charging method
- Picture 1(Charging method of electric bikes with unmovable batteries)
- Picture 2 (Charging method of electric bikes with removable batteries)
LCD Display ( functional instruction)
Functions
-
Display
Speed Display, Battery Level Display, Error Indication, Total Mileage, Single Mileage -
Control and Settings
Power Switch, Front light switch ,Wheel Diameter Setting, Maximum speed setting. Idleness Time Setting for Auto-Hibernation, Backlight Brightness Setting, Voltage Level Setting and so on -
Communications Protocol: UART
Display Readings (display at start for 1 second)
Display Details
- Light
- Battery Level
- Multi-Functions Display
- Total Mileage: ODO,Single Time Mileage: TRIP,Single Riding Time: TIME
- Current Voltage: VoL,Running current: CUR,DST (Temporary unused)
- Vehicle Mode
- Power: Strong Power Mode
- Speed Display
- Max Speed: MAX Average Speed: AVG
- Measuring Unit: MPH or KM/H
- The speed signal is generated from the Hall signal in the motor and is sent to the panel by the controller.
- The panel will calculate the actual travelling speed based on the wheel diameter and signal data (number of magnet steel is needed for Hall motors).
- Vehicle Status Display
- 6 KM/H booster Assist
- Constant speed service
- Electric Assisted mode
- BATT LED
- Brake Indicator
- Controller Failure
- Motor Failure
- Throttle Failure
Introduction of Keys
Long press ON/OFF to turn off the panel when it’s on. Short press the up key + to increase the PAS level, short press the down key – to decrease the PAS level. Specific operation
- Short press the key “+” to increase the PAS level, short press the down key ” – ” to decrease the PAS level.
- Short press PAS lever increase one lever
- Short press PAS lever decrease one lever
- Change the ways of speed display
- Long press change the ways of speed display
- The way to open the front light
- Long press open the front light
- Turn on I Off the LCD display
- Long press To Turn on I off the display
Notes
- Before riding, please read the «User’s Manual)) carefully. Please check whether the parts in good condition to ensure the safety of your riding.
- Please check the status of the vehicle. Please check the brake, wheel, handlebar, folding buckle, quick release part of the electric bike to make sure the electric bike has good status.
- Please check the electrical system:To know whether the battery power is enough. if it is not enough, you need charge it as soon as possible.
- Please check whether the brake system works properly. If it doesn’t work properly, please stop using it, please contact the official customer service person.
- lnstall pedals: if you buy new products. you need to install pedals by yourself. The pedals are divided into left and right sides. The “R” means the Right pedal. the “L means the Left pedal. and then tighten them counterclockwise. Remember it should be counterclockwise.
Warranty policy
- Users should operate in accordance with the product manual In case of any performance fault caused by the production quality, the company shall perform the obligations of the three guarantees in accordance with the provisions of relevant laws and regulations of the state.
- The company is still responsible for the after-sales service of the faults beyond three guarantees and the major components in the Three guarantees, but there will be a cost for repair.
- If the battery replacement over the warranty time, Our company will be supply the battery by factory price. To ensure safety and not to pollute the environment the battery must be 1:1 recycling and returned to the battery manufacturer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>