SAMEBIKE RS-A01 Commuter Fat Tire Electric Bike User Manual

SAMEBIKE RS-A01 Commuter Fat Tire Electric Bike

importing warning

• This manual include important safety performance information and service information. Please make sure you have read the following warning content before the first time you use our product.
• If you borrow your electric bicycle to other people, please let the user read this manual, it could help to decrease the risk of accident.
• Please wear a suitable and safe helmet before riding, please wear the clothes with fluores­cent and reflective stripes when you ride at night Don’t exceed speed limit, it is a main reason of traffic accident, we should abide by the traffic rule, we shouldn’t exceed the speed limit.
• Don’t touch the charging hole on the bike, or use metal touch it, otherwise, the accident will be caused by the transient short circuit of the current.
• Zero starting, braking frequent, driving against the wind, carrying people or anything, insufficient air pressure on the tires . All of these will use much electric energy, and then reduce the endurance mileage. If you want the best endurance mileage, please do something as follows:

1. please use assist mode;
2. on the premise of safety, don’t brake frequently or use zero starting;
3. Don’t overload;
4. Before riding, please check the pressure of the tire and supply enough pressure.

• Our Ebike should avoid prolonged exposure to the sun or rain, avoid storage in places with high temperature or corrosive gas, so as to avoid electroplating parts and paint surface by chemical corrosion and electrical parts damage, resulting in operational failure and accidents.
• Your current insurance business may not cover the situation you may encounter when riding an electric bike, please contact your insurance company or insurance broker for relevant consultation.
• According to the law in China, riding an electric bicycle or a three-wheeled Electric bike must reach the age of 16. If you use this product in other countries, please refer to the local laws and regulation.
• Bicycles are vehicles with certain risk fact factor, please be sure to abide by the traffic rules .At the same time, when emergency braking, brake the rear wheel first, then brake the front wheel, when cycling speed is too fast. There is a danger of tipping over if you brake the front wheel suddenly, please ride carefully.

Unpacking and product specs

Remove all package material, then inspect each item for any accident damage that may have occurred during shipping.You should find each of these items in your box:

SPECIFICATIONS

Product Components

1. Handlebar
2. Display
3. LED Front light
4. Suspension Fork
5. Disc brake
6. Tire
7. Battery
8. Pedal
9. Crankset
10. Chain
11. Saddle
12. Seatpost
13. Motor
14. Flywheel

Method of product assembly

Adjust the handlebar and stem

• Remove 4 screws
• Install the handlebar to adjust the direction
• Tighten 4 screws to fix the handlebar

Installing the front wheel

• Put the headlights and the front fender into the screws and tighten them
• Prepare the front tires
• Reverse the bike for easy installation
• Install the side with the biked disc into the direction with the disc brake
• Put the quick-release handle into the tire
• Tighten the spring and nut to the screw
• After screwing to a certain strength, fasten the quick-release handle in the direction of the arrow
• Lock the quick-release handle to complete the front wheel installation

Assemble the fender and headlight

• Loosen the set screw counterclockwise
• Put in and tighten the headlights and front fender respectively
• Install the headlights and front fender
• Fix the support iron frame and twist the screws.

The installation steps of the basket

• Take out the basket
• Loosen the head screws, align the basket screw holes with the head screw holes
• Twist on the screw
• Finally, headlights can be installed under the basket

Seat installation

• Loosen the quick-release lever according to the direction
• Insert the seat tube in the direction
• After adjusting the seat direction and height, lock the quick-release lever
• Complete the seat installation

Mounting pedal

• Prepare to pedal left and right
• The pedal “R” is installed on one side of the chainring, and “L” is opposite to the chainring
• Tighten the right pedal “R” clockwise
• Tighten the left pedal “L” counterclockwise

The method of removing the battery

• Turn the key clockwise to unlock the battery lock
• Remove the battery upwards
• Remove the battery

Product instruction

Charging method

• Plug the charger into the power hole
• The battery can also be removed for charging
• Plug the charger into power supply
• Red light shows the battery is charging, green light is full

LCD Display (functional instruction)

Functions
S1 meter offers a variety of features to meet your cycling needs, including:

• Intelligent electric power display
• Gear display
• Motor power indicator
• Speed display (including real-time speed, maximum speed, and average speed)
• Mileage display (including single mileage and total mileage)
• Assist pushing control and display
• Cruise indication
• Highlight Control and Display
• Error code display
• USB connection indicator
• Bluetooth connection indicator
• Multiple parameter settings (such as wheel diameter, speed limit, battery power setting and assist parameter setting, etc.)

Power on/off

• After long pressing the power on/off button , the meter starts to work and turns on the working power of the controller. In the power-on state, long press the power-on/off button to turn off the power. In the off state, the meter no longer uses the battery power, and the leakage current of the meter is less than 1 uA. If the electric bike is not used for more than 10 minutes, the meter will automatically shut down.

Assist pushing mode

• Press and hold the button, and after 2 seconds, the electric bike will enter the state of electric assist pushing mode. Electric bike travel at a speed of less than 6 kilometers per hour. At the same time, the screen displays Release the button, the electric bike will stop the power output immediately and return to the state before assist pushing mode.
• (Cautions: Assist pushing mode can only be used when the user is pushing the electric bike. Do not use it while riding.)

Headlight control

• Short press the button, make the controller turn on the headlights, dim the instrument backlight, and the screen display short press the button again, to make the controller turn off the headlights, and the instrument backlight return to brightness.

Power gear selection

• Short press or button to switch the power gear of the electric bike and change the out put power of the motor. The default output power range of the meter is 0-5, 0 stops power output, 1 is the lowest power, 5 is the highest power.When reaching the 5th gear, press the button again, the meter screen will still display 5, and flash 5 to indicate that the current is the highest gear.After the power-assisted downshift reaches the 0th gear, short press the button again, and the meter screen still displays 0, and O flashes to indicate that the current is the lowest gear. Meter startup default gear is 1.

Display interface switching

• After the instrument is powered on, the instrument will display real-time speed (km/h) and total mileage (km) by default. Short press the key to switch between the total mileage (km), single mileage (km), maximum speed (km/h), and average speed (km/h)

Error code display

• When the electric bike electronic control system fails, the meter will display automatically. For the detailed definition of the error code, see attached Table 1.
• (Cautions: When the error code is displayed, please troubleshoot the fault in time. After the fault occurs, the electric bike will not run normally.)

Notes

1. Before riding, please read the ((User’s Manual) carefully. Please check whether the parts in good condition to ensure the safety of your riding.
2. Please check the status of the vehicle. Please check the brake, wheel, handlebar, folding buckle, quick release part of the electric bike to make sure the electric bike has good status.
3. Please check the electrical system: To know whether the battery power is enough.if it is not enough, you need charge it as soon as possible.
4. Please check whether the brake system works properly. If it doesn’t work properly, please stop using it, please contact the official customer service person.

Warranty Policy

1. Users should operate in accordance with the product manual. In case of any performance fault caused by production quality, the company shall perform the obligations of the three guarantees in accordance with the provisions of relevant laws and regulations of the state
2. The company is still responsible for the after-sales service of the faults beyond three guarantees and the major components in the Three guarantees, but there will be a cost for repair.
3. If the battery replacement is over the warranty time, Our company will supply the battery at the factory price. To ensure safety and not pollute the environment the battery must be 1 :1 recycling and returned to the battery manufacturer

GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO., LTD
Address: NO.1 Factory, Xiling, Huashan town, HuaDu district. Guangzhou City, Guangdong Province CHINA
MADE IN CHINA

http://www.gzsamebike.com

Documents / Resources

| SAMEBIKE RS-A01 Commuter Fat Tire Electric Bike [pdf] User Manual
RS-A01 Commuter Fat Tire Electric Bike, RS-A01, Commuter Fat Tire Electric Bike, Fat Tire Electric Bike, Electric Bike, Bike
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>