LO26-II Electric Bike SAMEBIKE User Manual
- June 9, 2024
- SAMEBIKE
Table of Contents
LO26-II Electric Bike SAMEBIKE
lmporting warning
- This manual include important safety performance information and service information. Please make sure you have read the following warning content before the first time you use our product.
- If you borrow your electric bicycle to other people, please let the user read this manual, it could help to decrease the risk of accident.
- Please wear a suitable and safe helmet before riding, please wear the clothes with fluorescent and reflective stripes when you ride at night. Don’t exceed speed limit, it is a main reason of traffic accident, we should abide by the traffic rule, we shouldn’t exceed the speed limit.
- Don’t touch the charging hole on the bike, or use metal touch it, otherwise.the accident will be caused by the transient short circuit of the current.
- Zero starting, braking frequent, driving against the wind, carrying people or anything, insufficient air pressure on the tires. All of these will use much electric energy, and then reduce the endurance mileage. If you want the best endurance mileage, please do something as follows:
- please use assist mode.
- on the premise of safety, don’t brake frequently or use zero starting.
- Don’t overload.
- Before riding, please check the pressure of the tire, and supply enough pressure.
- Our Ebike should avoid prolonged exposure to the sun or rain , avoid storage in places with high temperature or corrosive gas, so as to avoid electroplating parts and paint surface by chemical corrosion and electrical parts damage, resulting in operational failure and accidents
- Your current insurance business may not cover the situation you may encounter when riding a electric bike, please contact your insurance company or insurance broker for relevant consultation
- According to the law in China, riding an electric bicycle or a three-wheeled Electric bike must reach the age of 16. If you use this product in other countries, please refer to the local laws and regulations.
- Bicycles are vehicles with certain risk fact factor , please be sure to abide by the traffic rules. At the same time, when emergency braking , brake the rear wheel first, then brake the front wheel, when cycling speed is too fast. There is a danger of tipping over if you brake the front wheel suddenly, please ride carefully .
Product components
- SADDLE
- SEAT POST
- MOTOR
- WHEEL CHAIN
- CRANKSET
- PEDALS
- SUSPENSION
- FOLDER
- BATTERY
- MIDDLE LCD DISPLAY WITH USB( LED FOR STANDARD VERSION )
- STEM
- FRONT LIGHT
- SUSPENSION FRONT FORK
- KICKSTAND
- FRONT LIGHT
Folding Method of Product
- Adjust the saddle tube and crank, loosen the saddle tube clamp with quick release. Insert the saddle tube down to the bottom and lock the saddle tube clamp with quick release. Adjust the crank Angle to 9 o ‘clock and fold the pedals at the same time.
- Folding frame. Open the frame folding with safety clasp.Fold the left and right sides of the frame.
- Open the folder of the frame, make the front wheel fold nearly parallel to the rear wheel, and finish the folding of bike.
Method of Product assembly
Tools preparation
Packing list (All gifts styles and colors are sent randomly and cannot be used as the reason for return)
Adjust handlebar and stem
Installing the front wheel
Installation of the fenders and headlight
Seat installation
Mounting pedal
The method of removing the battery
( The battery of Standard version can’t be removed )
Product instruction
Charging method
Picture 1 (Charging method of electric bikes with unmovable batteries)
LCD Display (functional instruction)
Functions
-
Display
Speed display, power-assisted gear display, battery indicator, fault prompt, total mileage, single mileage, headlight display, single driving time display -
Control and settings
Power switch control, headlight switch control, 6Km/h jog control, wheel diameter setting, maximum speed setting, idle automatic sleep time setting, backlight brightness setting, voltage level setting, -
Communication protocol: UART
Display Rradings(display at start for 1 second)
Meaning
of fault icon
Introduction to buttons The specific combination positions of the buttons are as follows
Introduction to the use of buttons
The key operation is divided into short press and long press, and the
combination key long press and short press are used for quick/frequent
operations, such as
- When riding, you need to modify the assist/speed gear, short press
- Is used to switch the display data in the multi-function area when riding, short press, single key long press is mainly used to switch the mode/switch state.The compound key (long press) is used for parameter setting, because the operation is complicated, ii can reduce the misoperation (short press does not do the compound key, because it is easy to trigger by mistake, the operation is too difficult)
Specific operation explanation:
Modify the assist ratio/electric gear, assuming the current assist mode
- Short press , boost +1
- Short press , boost -1
Switch speed display
long press + to switch speed display mode,
Set/deactivate 6Km/h cruise, switch headlights, clear ODO
hen the vehicle is stationary, long press to enter 6KM/h cruise mode, let
go and exit cruise mode; Long press to turn on and off the headlights; In the
P16 menu interface, long press for 5 seconds to clear ODO.
Switch LCD screen
If the current display is working, long press will turn off the display,
otherwise turn on the display
Switch the contents of the multi-function display area
Short press to switch the value of the multi-function display area
Setting parameters
Long press W to enter the parameter setting interface, the parameters that can be set include.Wheel diameter (unit: inch), number of magnets, LCD brightness, undervoltage point, etc. (see settings: P01-P20); In the setting interface, you can short press or to add or subtract a minimum precision unit value to the setting value.You can also press and hold or can continuously and quickly modify the parameters:
- Short press to switch to the next parameter;
- Long press + again to exit the setting and save the parameters. If you do not operate, it will automatically exit and save the modified parameters after 8 seconds.
Notes
- Before riding, please read the ((User’s Manual)) carefully. Please check whether the parts in good condition to ensure the safety of your riding.
- Please check the status of the vehicle. Please check the brake, wheel, handlebar, folding buckle, quick release part of the electric bike to make sure the electric bike has good status.
- Please check the electrical system :To know whether the battery power is enough. if it is not enough, you need charge it as soon as possible.
- Please check whether the brake system works properly. If it doesn’t work properly, please stop using it, please contact the official customer service person.
- lnstall pedals: if you buy a new products. you need to install pedals by yourself. The pedals are divided into left and right sides. The “R” means the Right pedal . the “L means the Left pedal. and then tighten them counterclockwise.Remember it should be counterclockwise
Warranty policy
- Users should operate in accordance with the product manual. In case of any performance fault caused by production quality , the company shall perform the obligations of the three guarantees in accordance with the provisions of relevant laws and regulations of the state.
- The company is still responsible for the after-sales service of the faults beyond three guarantees and the major components in the Three guarantees, but there will be a cost for repair.
- If the battery replacement over the warranty time , Our company will be supply the battery by factory price. To ensure safety and not to pollute the environment the battery must be 1 :1 recycling and return to the battery manufacturer .
GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO., LTD
Address:NO.1 Factory,Xiling,HuaShan
town,HuaDu dstrict. GuangZhou City, GuangDong Province CHINA
MADE IN CHINA
AFTER-SALES PROBLEMS SCAN THE QR CODE
GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO.,LTD
Add : N0.1 Factory, Xiling,HuaShan town, Hua Du dstrict. GuangZhou City,
GuangDong Province CHINA
Officialwebsite, www.gzsamebike.com
Please contact for after-sales questions
E-mail:sameway@gzsamebike.com
https://wwww.youtube.com/channel/UCS817BOK K4vkhJfj3o-4uA/featured