m-e BELL-520 RX Wireless Doorbell Instruction Manual

m-e BELL-520 RX Wireless Doorbell

Specifications

• Model: BELL-520 RX, BELL-521 RX
• Languages: Deutsch, English, Français, Nederlands

Product Information

The BELL-520 RX and BELL-521 RX are advanced receivers designed for various applications. They come with multiple features and functions to enhance user experience.

Product Usage Instructions

1. Unboxing and Setup
   When unboxing the product, ensure all components are included as per the user manual. Follow the provided instructions to set up the receiver

2. Powering On
   To power on the receiver, press and hold the power button until the LED indicator lights up. The device will enter standby mode.

3. Learning Mode
   To enter learning mode, press and hold the designated button until the LED ring blinks rapidly. After 30 seconds, the learning mode will automatically exit, and the receiver will be ready for use.

4. Multifunction Button
   The multifunction button allows for mode switching and additional functions. Consult the user manual for specific operations related to this button.

5. Additional Features
   Explore features such as adding more transmitters, performing a factory reset, and monitoring the control LED for status indications.

Frequently Asked Questions (FAQ)

• Q: How do I reset the receiver to factory settings?
  A: Press and hold the reset button for 10 seconds to perform a factory reset. Refer to the user manual for detailed instructions.

• Q: Can I add multiple transmitters to the receiver?
  A: Yes, you can add multiple transmitters by following the instructions provided in the user manual under the “Learning Mode” section.

BELL-520 RX BELL-521 RX

Wireless Doorbell Models :

• BELL-520 RX
• BELL-521 RX
• Thank you for purchasing this wireless doorbell from the Bell series. Please read the instruction manual carefully and keep it for future reference.
• When a paired wireless doorbell transmitter is activated, the wireless door-bell plays a ringtone and/or signals the ring visually, depending on the mode setting.
• The range varies depending on the transmitter model, between 100 and 500 meters under optimal conditions. The range is influenced by various factors such as metal or UPVC door frames, walls, or other devices operating on the same frequency.
• All transmitters in the Bell series are compatible with this wireless doorbell.
• The ringtone is set on the Bell transmitter. Refer to the corresponding transmitter manual for instructions. Typically, each transmitter has a button labelled “S” or “Sound” or “Melody” for this purpose.

CONTENTS

• 1x Wireless Doorbell
• 1x Operation and Installation Manual

LEGEND

1. Wireless Doorbell BELL-520 RX (Mains operated)
2. Wireless Doorbell BELL-521 RX (Battery operated) 3 = 230V / 50Hz power plug
3. Battery compartment (3x 1.5V type AA alkaline)
4.  Control LED
5. Plus button
6. Minus button
7. Multi-function button (Pairing / Mode switch / Reset) 9 = Illuminated ring / Speaker

COMMISSIONING

• Plug the receiver into a socket or insert the batteries correctly into the battery compartment (depending on the model you own).
• By default, no transmitter is paired, and the receiver automatically enters learning mode, indicated by rapid blinking of the illuminated ring. Learning mode is automatically exited after 30 seconds.
• Within this time, press your wireless doorbell transmitter. The receiver will then play a melody and be ready for use.

MULTI-FUNCTION BUTTON

With the multi-function button (M button), the receiver’s mode can be selected, additional transmitters can be paired, or a factory reset can be performed.
Mode Switching
Press the M-button briefly once to switch modes.
The following options are available:

• Only illuminated ring as ringtone
• Only melody as ringtone
• Melody and illuminated ring as ringtone

Pairing Additional Transmitters
Hold down the M button for about 3 seconds; the receiver will beep once, and the illuminated ring will blink rapidly for about 30 seconds. Press the doorbell button on the transmitter to be paired within this time. The receiver will play a melody to confirm, and the additional transmitter is paired.
Factory Reset
Hold down the M button for about 7 seconds. After 3 seconds, the receiver will beep once, and the illuminated ring will start blinking. After another 3 seconds, the illuminated ring briefly stops blinking, beeps 4 times, and starts blinking again. Then the receiver beeps once more, and the illuminated ring continues to blink. You can now release the M button, and the reset is performed. The receiver returns to its factory settings. The illuminated ring stops blinking after about 30 seconds. While it’s blinking, a transmitter can be paired by pressing the button on the wireless doorbell transmitter.

CONTROL LED

• Bell-520 RX
  The control LED lights up continuously red once the receiver is plugged into a socket.

• Bell-521 RX
  The control LED does not light up during normal operation. If it starts blinking, the batteries are depleted and need to be replaced.

VOLUME ADJUSTMENT
The volume can be adjusted in several steps using the Plus (6) and Minus (7) buttons. Press the Plus button briefly to increase the volume by one step, or the Minus button to decrease the volume by one step.

TECHNICAL SPECIFICATIONS

Bell 520 RX

• Operating voltage: 230V / 50 Hz
• Power consumption: <1W
• Frequency: 434MHz
• Range: approx. 100m to 500m (depending on the transmitter used)
• Temperature range: -20°C to +55°C

Bell 521 RX

• Operating voltage: 3x 1.5V alkaline type AA
• Frequency: 434MHz
• Range: approx. 100m to 500m (depending on the transmitter used)
• Temperature range: -20°C to +55°C

NOTES
Strong static, electric, or high-frequency fields (discharges, mobile phones, radio systems, cell phones, microwaves) may cause malfunctions.

• Cleaning and Maintenance
  The surface of the housing can be cleaned with a soft cloth moistened with soapy water. Do not use abrasive cleaners or chemicals.

SAFETY INFORMATION

• We are not liable for property damage or personal injury caused by improper handling or failure to observe safety instructions. In such cases, any warranty claims are void!
• For safety and certification reasons (CE), unauthorized modification and/or alteration of the product is not permitted.
• Do not leave packaging materials lying around; plastic films/bags, Styro-foam parts, etc., could become dangerous toys for children.
• Consult a professional if you have any doubts about the operation, safety, or connection of the device.
• Handle the product with care – it can be damaged by impacts, blows, or falls from even low heights.
• The Bell-520 RX is classified as protection class 2. Only a properly installed power outlet (230V~/50Hz) from the public power supply network may be used as a power source.
• Devices operated at mains voltage should not be accessible to children. Therefore, exercise special caution in the presence of children.

WARRANTY INFORMATION

This product is warranted to be free from defects in materials and workmanship for a period of 2 years from the date of purchase, provided that the device is used in the usual manner and regularly maintained. The obligations of this warranty are limited to the repair or replacement of any part of the device and are subject to the condition that no unauthorized modifications or attempted repairs have been made. Your statutory rights as a customer are in no way affected by this warranty.
Please note!
There is no warranty claim in, among others, the following cases:

• This product is warranted to be free from defects in materials and workmanship for a period of 2 years from the date of purchase, provided that the device is used in the usual manner and regularly maintained. The obligations of this warranty are limited to the repair or replacement of any part of the device and are subject to the condition that no unauthorized modifications or attempted repairs have been made. Your statutory rights as a customer are in no way affected by this warranty.

Please note!
There is no warranty claim in, among others, the following cases:

• The warranty claim expires for damages caused by failure to observe this operating manual. We do not accept liability for consequential damages! We are not liable for property damage or personal injury caused by improper handling or failure to observe safety instructions. In such cases, any warranty claims are void!

Limitation of Liability
The manufacturer is not liable for any loss or damage of any kind, including incidental or consequential damages, directly or indirectly resulting from the disruption of this product.

European regulations prohibit the disposal of obsolete or damaged electrical and electronic equipment in regular household waste. Instead, such equipment should be disposed of at a collection point in your community for recycling purposes. This system is funded by the industry and ensures environmentally friendly disposal and the recovery of valuable raw materials.

This operating manual is a publication of m-e GmbH modern-electronics, An den Kolonaten 37, 26160 Bad Zwischenahn, Germany
The operating manual corresponds to the technical state at the time of printing. Changes in technology and equipment are reserved.

http://www.m-e.de/download/ce/bell-52xrxce.odf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>