Xi an Lonn M E Equipment Co Ltd JX-37 Wireless Smart Barbecue Thermometer User Guide
- September 12, 2024
- Xi an Lonn M E Equipment Co Ltd
Table of Contents
Wireless Smart Barbecue Thermometer
Product Manual
Thanks for using our product, please read this instruction and download the application before using.
Product Appearance
- Setting key: Set the temperature of the barbecue task, after the setting is completed, press again to confirm
- temperature
- temperature—
- ° CP F to switch to the default °
- Buzzer
- Display area
- Mobile Connection
- Set temperature and actual food temperature (carousel)
- Temperature unit
- power of the main machine,
- temperature of the probe,
- power of the probe,
- card slot of the probe,
- charging contact of the probe,
- Type—c charging port
Product Specifications
| Bluetooth version: 5.2 | Internal temperature:-20-100° C/-4-212° F; |
|---|---|
| APP Name: AIBBQ | Ambient temperature: 0-275°C/32-527° F; |
| Wireless Distance: 500 feet max | Probe charging time: 30 minutes |
| Probe standby time: 24 hours | Host/repeater charging time: 2-3 hours |
| Host/repeater standby time: 120 hours | Waterproof rating: 1P66 (probe) |
Operational Precautions
- Please charge the host for 1-2 hours to ensure that the probe is located in the charging compartment of the host before using.
- Please charge the probe for 30 minutes before each use to ensure that it can stand by for 24 hours.
- When the probe is not turned on or cannot be connected to the APP, please put the probe back to the probe card slot for char ging, and observe the power. If the probe is fully charged, please disconnect and reconnect it on the APP.
- When the probe is in the oven, the APP prompts that the probe has been disconnected, please put the host close to the probe (oven). Walls and metal doors act as barriers to distance, please keep the effective distance between the host and the phone for use.
- To better communicate with your phone and make your wireless transmission longer, keep your host within 5 feet of your co okware. Due to the high surface temperature of the cooking equipment, please do not place the host directly on the surface of the cooking equipment or in a high temperature environment. The ambient temperature for safe use of the host is:-20° Cto 60° C.
- During use, please take protective measures to avoid high temperature burns.
APP Download
APP Operation Interface
Precautions
- There are a large number of Wi-Fi devices, 4G signals, high-power electrical appliances, etc. around the interfe rence, which may be stuck and intermittent
- Please use a charger from a regular source with safety certification for charging, 3. Use the product correctly to a void falling from a high altitude or heavy squeezing
- Children should be accompanied by an adult
- Keep away from extreme environments such as high temperature or humidity
- Do not disassemble this product
FCC Caution
“This device complies with part 15 of the FCC Rules. Operation is subjectto
the following two conditions:
(1) This device may not cause harmful nterference, and
(2)this device mustaccept any interference received, including interference
that may cause undesired operation
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority o operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digal device, pursuant to part 15 of the FCC Rules. These imits
are designed to provide reasonable protection against harmful nterference in a
residential installation. This equipment generates uses and can radite radio
frequency energy and, it not installed and used in ‘accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarartee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio o
television reception, which can be determined by tuming the equipment off and
on, the user s encotraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment nto an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radiofTV technician for help.
The device has been evaluated to mest general RF exposure requirement. The device can be used in portable exposure condition without restiction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>