m-e ADF-701 EX Hood phone Instruction Manual
- May 15, 2024
- m-e
Table of Contents
- m-e ADF-701 EX Hood phone
- Specifications
- INDOOR UNIT
- SAFETY INFORMATION
- LEGEND
- POWER SUPPLY
- SETTINGS
- Battery check
- TECHNICAL DATA
- Cleaning and maintenance
- SAFETY NOTES
- 2 YEAR LIMITED GUARANTEE
- Frequently Asked Questions (FAQ)
- LIABILITY LIMITATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
m-e ADF-701 EX Hood phone
INSTRUCTION MANUAL
Specifications
- Model: ADF-701 EX
- Type: Indoor Unit
- Manufacturer: m-e GmbH modern-electronics
INDOOR UNIT
![Specifications
Model: ADF-701 EX
Type: Indoor Unit
Manufacturer: m-e GmbH modern-electronics](https://manuals.plus/wp- content/uploads/2024/03/m-e-ADF-701-EX-Hood-phone_1.png)
1. loudspeaker | 8. volume button + |
---|---|
2. battery control LED indoor unit | 9. volume button – |
3. push-to-talk button | 10. battery compartment |
4. battery control LED outdoor unit | 11. socket for mains adapter |
5. charging base | |
6. charging indicator LED | |
7. ON/OFF switch |
Please read this manual carefully before operating the product and keep the manual for possible future use.
SAFETY INFORMATION
1. Do not operate electrically powered products in potentially explosive
atmospheres, such as in the presence of flammable liquids, gases or dust.
Electrically operated products generate sparks that can ignite the dust or
vapours.
2. Do not expose the power supply of this product to rain or moisture. Water
ingress into the power supply increases the risk of electric shock.
3. Do not misuse the power cord. Never use the cord to pull the plug from the
outlet. Keep the power cord away from heat, oil, sharp edges or moving parts.
Damaged cables increase the risk of electric shock.
4. The power adapter must match the power outlet. Never modify the plug in
any way. Otherwise, there is a risk of electric shock.
5. The warnings, cautions and instructions discussed in this manual may not
cover all possible conditions and situations that may occur. Therefore, use
the product with caution and care.
LEGEND
1. loudspeaker
2. battery control LED indoor unit
3. push-to-talk button
4. battery control LED outdoor unit
5. charging base
6. charging indicator LED
7. ON/OFF switch
8. volume button +
9. volume button –
10. battery compartment
11. socket for mains adapter
POWER SUPPLY
Indoor unit
Connect the supplied mains adapter to the socket on the charging base and to the mains (230V / 50 Hz). The LED on the charging base lights up green as soon as the mains adapter is connected.
Open the battery compartment and insert the supplied rechargeable batteries (type AAA NiMH) into the battery compartment with the correct polarity. Close the battery compartment and then place the indoor unit in the charging stand. The LED on the charging base changes to red to indicate that charging is in progress. When charging is complete, the LED changes back to green.
Use the ON/OFF switch (7) to switch the indoor unit ON or OFF accordingly.
SETTINGS
Pairing – How to pair indoor and outdoor unit
NOTE: All units must be switched on and powered.
1. Press and hold the volume button – (9) on the indoor unit until the talk
button flashes blue. 2.
2. Press the bell button (13) on the outdoor unit. Then press the pairing
button (16) with e.g. a bent paper clip.
3. If the pairing is successful, the pairing mode is automatically exited and
the LED indicators go out.
Adding an additional indoor/outdoor unit
A total of two indoor and two outdoor units can be paired together. If another
unit is to be added, repeat steps 1-3 with the second indoor/outdoor unit.
Notes:
- If a third indoor or outdoor unit is paired, the unit that was paired first is removed from the system.
- If an indoor unit is to be removed from the system, please press and hold the reset button of the unit for approx. 3 seconds until the display flashes red and blue. The unit is then no longer connected to any outdoor unit.
Setting the ringing melody
A total of 16 melodies are available. Press the bell button (13), the indoor
unit plays the currently set melody. Now press the button volume + (8) to play
the next melody. Each time the volume button + is pressed, the next melody is
played. To save the selected melody, press the talk button (4).
It is also possible to select different ringing melodies for two outdoor units.
Adjusting the ring volume
Press the button volume – (9) to adjust the ring volume. Each press increases
the volume. There are 5 volume levels available. After the loudest level, the
volume auto-matically jumps to the quietest level. The last selected volume is
automatically saved.
Speech connection
When a visitor presses the call button on the outdoor unit, the indoor unit
plays the selected ringing melody and the talk button lights up permanently in
blue. Press the talk buttons on the indoor unit to answer and talk to the
person on the outdoor unit (the LED indicator flashes blue during the talk
connection). The call is made in duplex
mode (as on the telephone). Press the talk button again to end the call. The
LED display goes out.
Call volume indoor unit
During a call, press the button volume + (8) to increase the volume or the
button volume – (9) to decrease the volume.
Battery check
As soon as the upper battery control LED (2) on the indoor unit flashes red during a call, the batteries of the indoor unit must be charged. To do this, place the indoor unit in the charging station. The charging control LED indicates the charging process by lighting up red.
If the outdoor unit is operated with batteries and the lower battery control LED (4) flashes red, replace the batteries of the outdoor unit must be replaced.
TECHNICAL DATA
- Frequency: 868MHz
- Operating temperature: – 10°C to +50°C
- Storage temperature: – 20°C to +60°C
- Humidity (in operation): ≤ 85%RH
- Radio range (free field): ≥ 100m
- Transmitting power: < 20mW
Indoor unit
- Power supply: 3x 1.2V NiMH rechargeable battery (type: AAA)
Charging base
- Power supply: 6V DV (~2W)
NOTES
The functionality of the unit can be affected by the influence of strong static, electrical or high frequency fields (discharging, mobile phones, radios, microwaves).
Cleaning and maintenance
Always disconnect mains powered units from the mains supply before cleaning (disconnect the plug). The unit housing can be cleaned using a soapy soft cloth. Do not use any abrasive materials or chemicals. Remove dust build-up from ventilation slits using a brush and clean up using a vacuum cleaner. Do not hold the vacuum cleaner nozzle directly against the unit.
SAFETY NOTES
- The warranty will be null and void in case of damages arising from violations of these operating instructions.
- We are not liable for consequential damages!
- We accept no liability for material damages or injuries arising from inappropriate use or violation of the safety instructions. In such cases all warranty claims are null and void!
- For reasons of safety and licensing (CE), unauthorised conversion and /or modification of the product is prohibited.
- Do not take the product apart! There is a danger of lethal electric shock!
- Do not leave packaging material lying about since plastic foils and pockets and polystyrene parts etc. could be lethal toys for children.
- The indoor unit is suitable only for dry interior rooms (not bathrooms and other moist places). Do not allow the device to get moist or wet. There is a danger of lethal electric shock!
- Handle the product with care – it is sensitive to bumps, knocks or falls even from low heights.
2 YEAR LIMITED GUARANTEE
For two years after the date of purchase, the defect-free condition of the product model and its materials is guaranteed. This guarantee is only valid when the device is used as intended and is subject to regular maintenance checks. The scope of this guarantee is limited to the repair or reinstallation of any part of the device, and is only valid if no unauthorised modifications or attempted repairs have been undertaken. Customer statutory rights are not affected by this guarantee.
Please note!
No claim can be made under guarantee in the following circumstances:
- Operational malfunction
- Empty batteries or faulty accumulator
- Erroneous coding/channel selection
- Fault through other radio installation (i.e. mobile operation)
- Unauthorised modifications / actions
- Mechanical damage
- Moisture damage
- No proof of guarantee (purchase receipt)
Claims under warranty will be invalidated in the event of damage caused by non-compliance with the operating instructions. We do not accept any responsibility for consequential damage! No liability will be accepted for material damage or personal injury caused by inappropriate operation or failure to observe the safety instructions. In such cases, the guarantee will be rendered void.
Frequently Asked Questions (FAQ)
Q: How do I adjust the volume on the indoor unit?
A: You can adjust the volume using the volume buttons located on the indoor unit.
Q: How do I know when the battery is fully charged?
A: The LED on the charging base changes from red to green when the battery is fully charged.
LIABILITY LIMITATION
The manufacturer is not liable for loss or damage of any kind including
incidental or consequential damage which is the direct or indirect result of a
fault to this product.
These operating instruction are published by
m-e GmbH modern-electronics
An den Kolonaten 37
26160 Bad Zwischenahn
Germany
The operating instructions reflect the current technical specifications at time of print. We reserve the right to change the technical or physical specifications.
Hiermit erklärt die m-e GmbH modern-electronics, dass dieses Gerät den folgenden Richtlinien entspricht:
- RoHS 2011/65/EU
- RED 2014/53/EU
Die KONFORMITÄTSERKLÄRUNG kann unter folgender Adresse abgerufen werden:
http://www.m-e.de/download/ce/ADF-710ce.pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>