BOSCH eShift Enviolo Automatic Plus eBike Systems Instruction Manual
- May 15, 2024
- Bosch
Table of Contents
BOSCH eShift Enviolo Automatic Plus eBike Systems Instruction Manual
Safety Instructions
Read all the safety and general instructions.
Failure to observe the safety and general instructions may result in electric
shock, fire and/or serious injury.
Save all safety warnings and instructions for future reference.
- Read and observe the safety warnings and directions contained in all the eBike system operating instructions and in the operating instructions of your eBike.
The term drive unit is used in these instructions to mean all original Bosch drive units from the system generation the smart system.
General Information
eShift is the integration of electronic gear shifting systems into the eBike from t he the smart system system generation.
The optimum gear for each speed is automatically engaged via a predefined desired cadence.
eShift with the Intuvia 100 On-Board Computer
The engaged gear will be shown briefly on the display whenever the gear is
shifted.
The drive unit detects the gear shift and briefly reduces the drive assistance
level as a result, which means the gear can also be shifted at any time under
load or on a hill.
Other settings, such as the required cadence, can be adjusted via the enviolo
app. This can be downloaded from the gear system manufacturer’s website.
eShift with the Kiox 300/Kiox 500 On-Board Computer
With the NuVinci/enviolo gear shifting, the required cadence can be changed
while riding using the operating unit.
Press the select button on your operating unit for more than 1 s and select
< eShift>.
You can find information about the version of your gear sys- tem in the menu
< Settings> →
For more information, read the operating instructions for your operating unit.
eShift with Rohloff E-14 Speedhub 500/14
Always use the Speedhub gearstick to shift gears with the Rohloff Speed hub
500/14.
Keeping the gearstick pushed down causes the system to keep shifting gear in
increments of three after the first gear change, until the lowest or highest
gear is reached.
eShift with the Intuvia 100 On-Board Computer
The engaged gear will be shown briefly on the display whenever the gear is
shifted.
The drive unit detects the gear shift and briefly reduces the drive assistance
level as a result, which means the gear can also be shifted at any time under
load or on a hill.
eShift with the Kiox 300/Kiox 500 On-Board Computer
The gear is always displayed in the start page. If you are on another screen, the gear will be briefly shown on the display each time it is changed.
The drive unit detects the gear shift and briefly reduces the drive assistance level as a result, which means the gear can also be shifted at any time under load or on a hill.
You can find information about the version of your gear sys- tem in the menu
< Settings> →
For more information, read the operating instructions for your operating unit.
eShift with 3×3 Nine
Always use the Speedhub gearstick to shift gears with 3×3 Nine.
Keeping the gearstick pushed down causes the system to keep shifting gear in increments of three after the first gear change, until the lowest or highest gear is reached.
eShift with the Intuvia 100 On-Board Computer
The engaged gear will be shown briefly on the display whenever the gear is
shifted.
The drive unit detects the gear shift and briefly reduces the drive assistance
level as a result, which means the gear can also be shifted at any time under
load or on a hill.
eShift with the Kiox 300/Kiox 500 On-Board Computer
The gear is always displayed in the start page. If you are on another screen,
the gear will be briefly shown on the display each time it is changed.
The drive unit detects the gear shift and briefly reduces the drive assistance
level as a result, which means the gear can also be shifted at any time under
load or on a hill.
You can find information about the version of your gear sys- tem in the menu
< Settings> →
For more information, read the operating instructions for your operating unit.
0 275 007 3ES | (30.03.2023) Bosch eBike Systems
