m-e ADF-701 EX Additional Indoor Station Instruction Manual

: June 12, 2024
: m-e

Table of Contents

ADF-701 EX Additional Indoor Station
**** SAFETY INFORMATION
LEGEND
POWER SUPPLY
SETTINGS
TECHNICAL DATA
**** NOTES
**** SAFETY NOTES
2 YEAR LIMITED GUARANTEE
LIABILITY LIMITATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ADF-701 EX
Instruction Manual

ADF-701 EX Additional Indoor Station

m e ADF 701 EX Additional Indoor Station - INDOOR

loudspeaker
battery control LED indoor unit
push-to-talk button
battery control LED outdoor unit
charging base
charging indicator LED
ON/OFF switch
volume button +
volume button 10.
battery compartment
socket for mains adapter

Please read this manual carefully before operating the product and keep the manual for possible future use.

**** SAFETY INFORMATION

Do not operate electrically powered products in potentially explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Electrically operated products generate sparks that can ignite the dust or vapours.
Do not expose the power supply of this product to rain or moisture. Water ingress into the power supply increases the risk of electric shock.
Do not misuse the power cord. Never use the cord to pull the plug from the outlet. Keep the power cord away from heat, oil, sharp edges or moving parts.
Damaged cables increase the risk of electric shock.
The power adapter must match the power outlet. Never modify the plug in any way. Otherwise, there is a risk of electric shock.
The warnings, cautions and instructions discussed in this manual may not cover all possible conditions and situations that may occur. Therefore, use the product with caution and care.

LEGEND

loudspeaker
battery control LED indoor unit
push-to-talk button
battery control LED outdoor unit
charging base
charging indicator LED
ON/OFF switch
volume button +
volume button 10.
ttery compartment
socket for mains adapter

POWER SUPPLY

Indoor unit
Connect the supplied mains adapter to the socket on the charging base and to the mains (230V / 50 Hz). The LED on the charging base lights up green as soon as the mains adapter is connected.
Open the battery compartment and insert the supplied rechargeable batteries (type AAA NiMH) into the battery compartment with the correct polarity. Close the battery compartment and then place the indoor unit in the charging stand. The LED on the charging base changes to red to indicate that charging is in progress. When charging is complete, the LED changes back to green.
Use the ON/OFF switch (7) to switch the indoor unit ON or OFF accordingly.

SETTINGS

Pairing – How to pair indoor and outdoor unit
NOTE: All units must be switched on and powered.

Press and hold the volume button – (9) on the indoor unit until the talk button flashes blue. 2.
Press the bell button (13) on the outdoor unit. Then press the pairing button (16) with e.g. a bent paper clip.
If the pairing is successful, the pairing mode is automatically exited and the LED indicators go out.

Adding an additional indoor/outdoor unit
A total of two indoor and two outdoor units can be paired together. If another unit is to be added, repeat steps 1-3 with the second indoor/outdoor unit.
Notes:

If a third indoor or outdoor unit is paired, the unit that was paired first is removed from the system.
If an indoor unit is to be removed from the system, please press and hold the reset button of the unit for approx. 3 seconds until the display flashes red and blue. The unit is then no longer connected to any outdoor unit.

Setting the ringing melody
A total of 16 melodies are available.
Press the bell button (13), the indoor unit plays the currently set melody. Now press the button volume + (8) to play the next melody. Each time the volume button + is pressed, the next melody is played. To save the selected melody, press the talk button (4).
It is also possible to select different ringing melodies for two outdoor units.
Adjusting the ring volume
Press the button volume – (9) to adjust the ring volume. Each press increases the volume. There are 5 volume levels available.
After the loudest level, the volume automatically jumps to the quietest level. The last selected volume is automatically saved.
Speech connection
When a visitor presses the call button on the outdoor unit, the indoor unit plays the selected ringing melody and the talk button lights up permanently in blue. Press the talk buttons on the indoor unit to answer and talk to the person on the outdoor unit (the LED indicator flashes blue during the talk connection). The call is made in duplex mode (as on the telephone). Press the talk button again to end the call. The LED display goes out.
Call volume indoor unit
During a call, press the button volume + (8) to increase the volume or the button volume – (9) to decrease the volume.
Battery check
As soon as the upper battery control LED (2) on the indoor unit flashes red during a call, the batteries of the indoor unit must be charged.
To do this, place the indoor unit in the charging station. The charging control LED indicates the charging process by lighting up red.
If the outdoor unit is operated with batteries and the lower battery control LED (4) flashes red, replace the batteries of the outdoor unit must be replaced.

TECHNICAL DATA

Frequency: 868MHz
Operating temperature: -10°C to +50°C
Storage temperature: -20°C to +60°C
Humidity (in operation): ≤ 85%RH
Radio range (free field): ≥ 100m
Transmitting power: < 20mW
Indoor unit
Power supply: 3x 1.2V NiMH rechargeable battery (type: AAA)
Charging base
Power supply: 6V DV (~2W)

**** NOTES

The functionality of the unit can be affected by the influence of strong static, electrical or high frequency
fields (discharging, mobile phones, radios, microwaves).
Cleaning and maintenance
Always disconnect mains powered units from the mains supply before cleaning (disconnect the plug). The unit housing can be cleaned using a soapy soft cloth. Do not use any abrasive materials or chemicals. Remove dust build-up from ventilation slits using a brush and clean up using a vacuum cleaner. Do not hold the vacuum cleaner nozzle directly
against the unit.

**** SAFETY NOTES

The warranty will be null and void in case of damages arising from violations of these operating instructions.
We are not liable for consequential damages!
We accept no liability for material damages or injuries arising from inappropriate use or violation of the safety instructions. In such cases all warranty claims are null and void!
For reasons of safety and licensing (CE), unauthorised conversion and /or modification of the product is prohibited.
Do not take the product apart! There is a danger of lethal electric shock!
Do not leave packaging material lying about since plastic foils and pockets and polystyrene parts etc. could be lethal toys for children.
The indoor unit is suitable only for dry interior rooms (not bathrooms and other moist places). Do not allow the device to get moist or wet. There is a danger of lethal electric shock!
Handle the product with care – it is sensitive to bumps, knocks or falls even from low heights.

2 YEAR LIMITED GUARANTEE

For two years after the date of purchase, the defect-free condition of the product model and its materials is guaranteed. This guarantee is only valid when the device is used as intended and is subject to regular maintenance checks. The scope of this guarantee is limited to the repair or reinstallation of any part of the device, and is only valid if no unauthorised modifications or attempted repairs have been undertaken. Customer statutory rights are not affected by this guarantee.
Please note!
No claim can be made under guarantee in the following circumstances:

Operational malfunction
Empty batteries or faulty accumulator
Erroneous coding/channel selection
Fault through other radio installation (i.e. mobile operation)
Unauthorised modifications / actions
Mechanical damage
Moisture damage
No proof of guarantee (purchase receipt)

Claims under warranty will be invalidated in the event of damage caused by non-compliance with the operating instructions. We do not accept any responsibility for consequential damage! No liability will be accepted for material damage or personal injury caused by inappropriate operation or failure to observe the safety instructions. In such cases, the guarantee will be rendered void.

LIABILITY LIMITATION

The manufacturer is not liable for loss or damage of any kind including incidental or consequential damage which is the direct or indirect result of a fault to this product.
These operating instruction are published by
m-e GmbH modern-electronics
An den Kolonaten 37
26160 Bad Zwischenahn
Germany
The operating instructions reflect the current technical specifications at time of print. We reserve the right to change the technical or physical specifications.