LEXON LD151 POWERUP 15W Wireless Charger User Manual
- August 24, 2024
- LEXON
Table of Contents
LEXON LD151 POWERUP 15W Wireless Charger
Q: What should I do if the LED light doesn’t turn green when I place my device on the charging pad?
A: If the LED light doesn’t turn green, make sure your device is Qi-certified and properly aligned on the charging pad. Also, ensure that you are using a power adapter that delivers at least 18W.
Q: Can I use any USB wall charger with the Powerup charging pad?
A: It is recommended to use a power adapter that delivers at least 18W to ensure optimal performance of the Powerup charging pad.
Q: What does a red blinking LED light indicate?
A: A red blinking LED light indicates either a foreign object detected on the charging pad or that a non-compatible device is being used. Make sure to align your device properly for successful charging.
IN THE BOX
- 1x Powerup charging pad
- 1x USB-C cable
- 1x User manual
PRODUCT OVERVIEW
- Wireless charging surface
- LED light for wireless charging status
- USB-C port
PRODUCT OPERATIONS
Important note: Powerup is a wireless charger for Qi-certified devices.
Make sure your mobile device supports wireless charging.
Follow the instructions below to get the most out of your charging pad.
INSTALLATION
-
Step 1: Connect the supplied USB cable to Powerup USB-C port.
-
Step 2: Connect the other end of the cable to a USB wall charger and plug the charger into an outlet.
-
Step 3: Place your Qi-certified mobile device on top of the Charging Pad. When the status light on the Charging Pad lights up green, it is now charging.
(A) To get your Powerup charging pad properly operating, make sure to use a
power adapter (not included) that delivers at least 18W.
NOTE: Red blinking LED indicates either a foreign object detected or a non-
compatible device. Make sure to perfectly align your device with the charger
to ensure proper charging operations.
- Charging pad plugged in: Green LED flashes twice
- Wireless charging in progress: Green LED ON
- Foreign object detected: Red LED flashes slowly
SAFETY PRECAUTIONS
- Only use the voltage specified as correct for the device.
- Do not place the device near heat sources such as heaters or radiators.
- Do not expose the device to water during charging, as this could permanently damage the speaker or power source.
- Keep away from corrosive liquids.
- Do not put any metal objects on the top of the charging pad.
- Do not open the device or attempt to disassemble the internal parts or modify them in any way.
PRODUCT SPECIFICATIONS
- Material: Synthetic leather/Aluminum/ABS
- Dimensions: Ø3.07 x 0.24’’ / Ø7.8 x 0.6 cm
- Weight: 0.15 lbs / 70 g
- Compatibility: Any Qi-enabled devices
- Max. wireless output: 15W
- Connector: USB-C
- Input port: 9V-2A (18W)
- Power supply: use with Quick Charge 3.0 Power Adapter (not included) or a DC 9V/2A power Adapter (not included)
- Water resistance: IPX4
- Frequency band: 110-205 KHz
- Operating temperature: 32°F – 95°F – 0°C- 35°C
- International warranty: 1 year
1<5, Avenue des Champs-Elysees – 75008 Paris – FRANCE
All brands or product names are or may be trademarks or their respective
owners.
Pictures and specifications are not contractual. Assembled in China.
lexon-design.com / @lexondesign