MAIWO K3082H HDD Docking Station with USB User Manual

User Manuals

K3082H HDD Docking Station with USB HUB *3

K3082H HDD Docking Station with USB

Package
contents| HDD Docking Station, User manual,
USB cable, Power adapter

PC storage

1.1. Insert 2.5″or 3.5″ SATA Hard Drive with SATA connector, make sure that they had connected firmly. Then connect cable with PC and docking,

1.2. Plug power adapter with docking, turn on power switch.

Remark: Workable to one or two HDD when connecting with PC, If it is new SSD, please do initialization and formation in disk management before using, then it is able to be recognized as USB device.

New hard disk format

2.1. View “computer- Manage – Disk Management” to find the new disk.

Note: There are two formats when initialization, please choose MBR if your drives are smaller than 2TB, choose GPT if your drives are larger than 2TB.
2.2. Right click the “Disk 1” ,thenclick “New Simple Volume” .

2.3. According to the instruction, choose the size of partition, then click “Next” to finish.
2.4. Then you can find the new hard disk inthe “Computer, its readyto be use.

Clone

3.1. Insert 2.5″/3.5″ hard drive to HDD1, and HDD2.(Attention:
HDD1 must <= HDD2 ,otherwise can not clone)

3.2. Turn on power switch, no need connect with USB cable.

3.3. Red LED light will illuminate in several seconds, then keep pressing clone button for 5S-8S approximate, all blue LED light will illuminate then release press.

3.4. It starts to clone when 25% light flash LED light will indicate the cloning rate from 25%, 50%, 75%, 100%.
3.5. When all LED lights illuminate and eliminate, it completed clone.

For FAQs and more information, Please visit:
Email: info@maiwoasia.com
Website: www.maiwoasia.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>