YAMI i12 Bluetooth Headset Instructions

YAMI i12 Bluetooth Headset

Key Description

Key Function

1. Power on: Remove the headset from the charging case and the headset will automatically power on and pair. Or press and hold the touch button for 3 seconds to power on.
2. Shutdown: Put it in the charging compartment to automatically shut down or press and hold the touch button for 5 seconds to shut down.
3. Play/Pause: Click one of the earphone touch buttons during playback to pause playback, and click to replay during pause.
4. Answer/hang up a call: Click one of the headset touch buttons to answer the incoming call. To end the call click one of the headset touch buttons to hang up.
5. Reject the call: long press the headset touch button for 2-3 seconds to reject the call.
6. Previous song: Double-click the main ear touch button
7. Next song: Double-click the ear-attached touch button
8. Volume Adjustment+: Triple-click the ear-mounted touch button
9. Volume adjustment-: Triple tap the main ear touch button
10. Wake up Siri/voice assistant: long press the touch button for 1.5 seconds while the phone is connected

paired connection

How do I power on and pair the headset?

1. Remove the earphones from the charging case. At this time, the headset will automatically power on and pair. When the indicator light of one earphone flashes alternately red and blue, and the other earphone is off, it indicates that the pairing of the earphone is successful. Turn on the phone’s Bluetooth function, search for “i12” and click connect.
2. When there is no charging box, press and hold the multi-function buttons of the two earphones for 3 seconds, you will hear the prompt sound of “power on”, and when the red and blue indicator lights of the earphones flash alternately, it means that the earphones are turned on. After the two earphones are powered on, they will be paired automatically, and the indicator light of one of the earphones will turn off, indicating that the two earphones have been paired successfully. Turn on the phone’s Bluetooth function, search for “i12” and click connect.
3. When the headset is paired for the first time, the headset will be automatically paired when turned on in the future, and it will also automatically reconnect to the connected device.

Description of the charging indicator

1. Put the headset into the charging box (the magnetic contact interface should be placed correctly), and the headset will automatically enter the charging state.
2. When the headset is charging: the red light is always on
3. When the headset is fully charged: the indicator light is off

Precautions

Please use the charging head with 1A output, do not use the fast charging charging head, so as not to damage the charging case.

Product Specifications

Long battery capacity in charging

compartment

| 200 mAh
Headphone charging time| 约0.5hours
Charging time of the charging box| 约1hours
Communication distance| 10M

Note: Product parameters will vary depending on the model, usage, environment, etc.

Precautions for use

1. The earphones should be stored in a dry and ventilated environment to avoid contact with oil, water vapor, steam, moisture and dust, so as not to affect the product performance.
2. Avoid using harsh, organic solvents or items containing these ingredients to clean the earphones.
3. Headphones should be used correctly and in accordance with the requirements. Pay attention to the impact of the use environment on the headphones. To ensure smooth connection, it is recommended that the distance between the mobile phone and the headphones be within 10 meters.
4. If the headset cannot be connected or the communication is not smooth and other problems, please do not disassemble the headset body and its accessories without permission, otherwise the warranty will not be voided.
5. To charge the charging box, please use the standard charger or the charger that meets the requirements.
6. To ensure your normal use of the headset, please ensure that the headset is fully charged.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>