MAIWO K3062 External Hard Drive Docking Station User Manual

June 1, 2024
MAIWO

User Manuals

K3062 Dual bay HDD Docking Station

Specifications:
  1. HDD1
  2. Power light
  3. HDD1 light
  4. 25-100% LED light on
  5. HDD2 light
  6. Clone Button
  7. HDD2
  8. USB3.0 slot
  9. ON/OFF Switch
  10. DC in
Product name MAIWO Dual bay HDD Docking Station
Model K3062
Product size 16011568mm
Compatible with 2.5 inch/3.5 inch HDD or SSD
Power supply External power supply
Interface USB3.0, compatible with USB2.0/1.1
Function Data read and write, 1:1 Clone no need PC
System Windows, MAC OS, Linux
Contents HDD Docking Station, User manual, USB cable, Power adapter
Indicator Light Power light: red

HDD/SSD light: white, flash when reading / writing
Clone progress light: All progress lights are blue when clone finished

1. HDD/SSD Read & Write:

1.1. Insert the HDD/SSD to the docking station, connect the docking station to computer with USB3.0 cable.

1.2. Connect the docking station to power with power adapter, turn the power switch on, drive will appear on the computer and the USB driver will be installed automatically.

Note: If it is used SSD, you can find the new drive on “computer” , read & write normally. If it is new drive, you need to initialize, partition, format it firstly before use.

2. New hard disk format:

2.1. View “computer- Manage – Disk Management” to find the new disk .

Note: There are two formats when initialization, please choose MBR if your drives are smaller than 2TB, choose GPT if your drives are larger than 2TB.

2. Hard disk partition:

2.2. Right click the “Disk 1” , then click “New Simple Volume”.

2.3. According to the instruction, choose the size of partition, then click “Next” to finish.
2.4. Then you can find the new hard disk in the “Computer, it s ready to be use.

3. Offline clone:

3.1. Insert source HDD/SSD to HDD1 bay, insert target HDD/SSD to HDD2 bay.

(Note: Don’ t need to connect to computer. The capacity of target HDD/SSD must be equal or larger than source HDD/SSD, or can’ t clone)

3.2. When the corresponding HDD/SSD indicator light is on, long press the clone key for about 5-8 seconds, clone begins. When 25%, 50%, 75%, 100% are all on, clone finished.

  1. 25-100% LED light on

For FAQs and more information, Please visit:

Email:info@maiwoasia.com
Website:www.maiwoasia.com

Instagram @MAIWO_Official

Twitter @MAIWOOffcial

Facebook @MAIWO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals