MAIWO K1719 External Case Compatible With Thunderbolt User Manual
- May 15, 2024
- MAIWO
Table of Contents
K1719 External Case Compatible With Thunderbolt
User Manual
K1719 External Case Compatible With Thunderbolt
| Product Name | MAIWO USB 4.0 Type C 40Gbps to M.2 NVMe SSD Enclosure |
|---|---|
| Model No. | K1719 |
Internal
interface| Support M Key & B+M Key 2280 M.2 NVMe SSD
Data transfer
interface| Type-C
Material| Aluminum alloy
Features| Data transfer
OS| Windows/Mac OS/Linux
Indicator light| When the power is on, the blue light constantly stays lit.
The light flashes when the hard drive is reading or writing data.
Installing the hard drive
1.1. Press and push in the direction indicted by the arrow on the hard disk
enlcosure to slide the drive tray out of the PCBA board.
1.2. Then insert the silicone plug into the corresponding hole.
1.3. Attach the slicone thermal pad to the SSD and then attach th e aluminum
strip to the slicone pad. 1.4. Insert the NGFF (M.2) SSD or M.2 NVMe protocol
SSD at a 45°angle into the NGFF (M.2) connector on the PCBA board.
1.5. Adjust the silicon plug to secure the SSD. Install the aluminum case and
the disk tray of the PCBA board.
1.6. Attach the fan to the fan icon on the back cover of the hard drive
enclosure.
Connect it to PC:
2.1. After installing the hard drive enclosure, connect it to the computer
using the USB4.0 data cable provided.
2.2. Connect the fan with its power cable to dissipate heat for the hard drive
enclosure.
Reminder: After the fan is working, please place the product out of reach
of children to prevent them from cutting their fingers by the fan
blades.
N o te: If you install a hard drive
already has data on it, it will apeera under “computer” as a newly added hard
drive and can read and write normally.
If you install a brand new hard drive, you need to initialize, partition and
format the hard drive before use.
New hard disk format:
3.1. View “Computer-Manage-Disk Management” to find the new disk.
3.2. Right click the “Disk1” ,thenclick “New Simple Volume” .
Note:There are two formats when initialization,please choose
MBR if your dirve are smaller than 2TB,choose GPT if your dirves are larger
than 2TB.
3.3. According to the instruction, choose the size of partition, then click
“Next” to finish.
3.4. Then you can find the new hard disk inthe “Computer, it s readyto be
use.
For FAQs and more information, Please visit:
Email: [email protected]
Website: www.maiwoasia.com
Instagram
@MAIWO_ Official
Twitter
@MAIWOOffcial
Facebook
@MAIWO