MAIWO K35274D 4 Bay RAID External Hard Drive Enclosure User Manual
- June 15, 2024
- MAIWO
Table of Contents
K35274D 4 Bay RAID External
Hard Drive Enclosure
User Manual
K35274D-4 bay HDD Enclosure
Introduction
- product name:
Item Name:| MAIWO Quad-bay RAID HDD Enclosure
---|---
Interface:| Type C+HDMI to SATA
HDD support:| 3.5″ SATAI/II/III
Feature:| Hardware RAID0/1+10/3/5/Normal/Clone/LARGE
Speed:| Max 5Gbps
Material:| Aluminum housing
Rating:| 12V,6.5A
Dimension:| 184127115MM
Compatibility:| OS: Windows, Mac OS, Linux
HDMI:Type C device with DP output
Operation guide
Quick installation Guide:
A.Take out of middle plastic frame
B.Assemble HDD as follows:
| |
---|---|---
1.Unfix HDD1/2 plastic frame screws| 2.Assemble and fix HDD 3 and HDD 4 , fix
with HDD screws| 3.Assemble and fix HDD1 and HDD 2, fix with HDD screws
| |
4.Fix HDD1/2 plastic frame with screws| 5.Push full middle frame into aluminum
housing| 6.Fix enclosure with screws at the bottom and adhere with rubber
cushion from slide
connecting with computer:
- Plug desktop power adapter and power cord with enclosure
- Connect USB cable with enclosure and computer
- Turn on power switch and fans switch
- fused hard sk youcoulfind o “computer” directly.
- If new hard desk youneed check it from “desk management” . fomat and then you can use.
connecting with video device
- Plug desktop power adapter and power cord with enclosure
- Connect USB-C cable with input device(e.g PC, smart phone…)
- Connect HDMI cable(exclude in package) with enclosure and display monitor
- Turn on power switch and fans switch
- Set monitor if itis required
RAID SETTING
Kindly note:
Pls back up the data before you set up/reset the RAID mode, or data will be
lost!
Default in JBOD(PC) mode at factory
-
LRAID O Mode: set R0 svitch all up as left icon and press. reset button keep for several seconds ill RAIDO LED illuminate.
-
RAID(1/10) mode: a.Reset toNormal mode first as eft icon, and press reset button keep for several seconds till Normal LED illuminate. b.Set RAID switch as left, and press reset button ,keep for several seconds till Raid 1(10) LED illuminate.
c.Do initialization and formation in PC” Disk management”, then available to write and read. -
RAI D3 mode: a .Reset to Normal mode as RAID 1 step “a”
b .Set RAID switch as left, and press reset button ,keep for several seconds till Raid 3 LED illuminate.
c.Do initialization and formation in PC” Disk management”, then available to write and read. -
RAI D5 mode: a .Reset to Normal mode as RAID 1 step” a”
b .Set RAID switch as left, and press reset button ,keep for several seconds till Raid 5 LED illuminate.
c.Do initialization and formation in PC” Disk management”, then available to write and read. -
LARGE mode a .Reset to Normal mode as RAID 1 step” a”
b .Set RAID switch as left, and press reset button ,keep for several seconds till LARGE LED illuminate.
c.Do initialization and formation in PC” Disk management”, then available to write and read. -
Clone mode a Resetto Normal mode as RAID 1 step” a
b .Set RAID switch as left, and press reset button keep for several seconds til Clone LEDlluminate.
c. Do initialization and formation in PC” Disk management’, then available to write and read.
If you set other raid modes for the second time, you need to switch to normal mode before you can set up other raid modes. Otherwise, the product will be regarded as invalid to switch raid modes
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>