MAIWO K1683P2 SSD Enclosure Adapter User Manual
- June 14, 2024
- MAIWO
Table of Contents
MAIWO K1683P2 SSD Enclosure Adapter
Feature
Description
Quick Installation Guide
Installation
- Pull the PCBA board out of the aluminum case from USB-A port.
- Put the silicone gel into the corresponding hole on the PCBA board (according to the SSD length).
- Obliquely insert the M.2 SSD to the M.2 slot, adjust the silicone gel to fasten the SSD.
- Slide the PCBA back into the case, put the plastic cover on, fix it by 2 screws.
- Connect USB cable with housing and PC.
Remark :
for partitioned SSD, it will be recognized as “New Volume” after connect with
USB cable, it can be read and write directly; for new SSD, you must do
initialization and partition before recoginze after connect with PC.
**New hard disk format
**
-
* Right click the **“Disk 1” ,** then click “New Simple Volume”
Hard disk partition
-
* According to the instruction, choose the size of partition, then click “Next” to finish.
-
- Then you can find the new hard disk in the “Computer” , it’s ready to be use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>