MAIWO K1642S mSATA SSD Enclosure User Manual
- May 15, 2024
- MAIWO
Table of Contents
MAIWO K1642S mSATA SSD Enclosure
Installation
Take out of board from the side unlocked, assemble mSATA SSD as direction 45 degree below.
Fix SSD and board with screws and nuts to half-size SD, then close the enclosure with screws.
Connect enclosure with PC USB port.
Remark For partitioned SSD, it will be recognized as “New Volume” after connect with USB cable, it can be read and write directly; for new SSD, you must do initialization and partition before recognize after connect with PC .
New hard disk format
View “computer-Manage – disk management” to find the new disk .
Right click the “Disk l” , then click “New Simple Volume”
Hard disk partition
According to the instruction, choose the size of partition, then click “Next” to finish.
Then you can find the new hard disk in the “Computer, it s ready to be use.
For FAQs and more information, Please visit:
- Email: [email protected]
- Website: www.maiwoasia.com
lnstagram
MAIWO_Official
Twitter
@MAIWOOffcial
Facebook
@MAIWO