MAIWO K1685P3 20Gbps NVMe M.2 Enclosure Instructions

June 2, 2024
MAIWO

MAIWO K1685P3 20Gbps NVMe M.2 Enclosure

MAIWO-K1685P3-20Gbps-NVMe-M-2-Enclosure-PRODUCT

OVERVIEW

Specifications

Installation

  • Pull out the tray and unfasten screws at size 80mm, then assemble SSD(M-key NVMe ) at degree 45.
  • Fix SSD screws with the board and push the board into the housing.
  • Fix the enclosure’s screws and adhensive acrylic on the side.
  • Connect cable with PC and enclosure.
  • Remark: For partitioned SSD, it will be recognized as “New Volume” after connecting with the Type-C cable, it can be read and written directly; for a new SSD, you must do initialization and partition before recognizing after connecting with the PC

New hard disk format

  • View “computer- Manage – Disk Management” to find the new disk.MAIWO-K1685P3-20Gbps-NVMe-M-2-Enclosure-FIG-6
  • Right-click the “Disk 1 then click “New Simple Volume
  • Note: There are two formats when initialization, please choose MBR if your drives are smaller than 2TB, and choose GPT if your drives are larger than 2TB.

Hard disk partition

  • According to the instructions, choose the size of a partition, then click “Next” to finish.
  • Then you can find the new hard disk in the “Computer, it s ready to be used.MAIWO-K1685P3-20Gbps-NVMe-M-2-Enclosure-FIG-8
  • For FAQs and more information, please visit: Email:info@maiwoasia.com
  • Website:www.maiwoasia.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals