MAIWO KC015 PCIe Expansion Card User Manual
- June 5, 2024
- MAIWO
Table of Contents
KC015 PCIe Expansion Card
User Manual KC015
PCIe Card
Introduction
Product name :
MAIWO KC015 PCIe X1 to 3-port USB HUB+1000M network port expansion card
Item name: | Pole X1 to 3-port USB HUB+1000M network port expansion card |
---|---|
Support: | 3xUSB HUB 1000M network |
Interface: | PCIe X1 is compatible with x4/x8/ X16 card slots |
Connector: | Usb3.0-5gbps transmission bandwidth |
Materials: | Metal base + glass fiber plate |
power supply: | PCIe interface +15Pin SATA dual power supply interface |
Size: | 112(L)120(Wy18.6(H) MM |
System: | Windows?/8/10/Linux |
Quick Installation Guide
Installation
-
Insert express card to PCIe×1/ 4/8/16 slot on the motherboard;
-
Fix full profile bracket with tower panel of PC.
-
The network indicator light: green illuminate when power is connected and flash yellow when transferring data.
-
15pin SATA power cable, ready for PCIe power is weak.
Note: Initialize the partitioned hard disk step when the USB interface is connected to the new removable hard disk
Ⅰ. New hard disk format:
View “computer-Manage-disk management” to Find the New disk.
II. New hard disk format:
Right click the “External disk”, then click “New Simple Volume”.
Hard disk partition:
According to the instruction, choose the size of the partition, then dick
“Next” to finish.
Ⅳ. Hard disk partition:
Then you can find the new hard disk in the “Computer”, it’s ready to be
used.
initialization, partition, and format
-
View“computer – Manage – disk management” to Find the new disk.
Remark: There are two types MBR and GPT. SSD capacity <=2T, please choose MBR, if more than 2T, choose GPT. -
Right-click the “Disk 1”, then click “New Simple Volume”.