MAIWO K3016P2 Dual Bay Hard Drive Docking Station Duplicator User Manual
- June 14, 2024
- MAIWO
Table of Contents
MAIWO K3016P2 Dual Bay Hard Drive Docking Station Duplicator
SPECIFICATION
Product Name:
MAIWO K3016P2 2Bay AHCI&M.2 NVMe SSD Docking Station Duplicator
MAIWO K3016P2 2Bay AHCI&M.2 NVMe SSD Docking Station Duplicator
Quick Installation Guide
Read & Function
- Insert your SSD, plug the power into the DC IN port, connect the data cable to the PC port, and connect the other end to your device.
- PS: Only the source port can plug into the converted AHCI hard disk.
- Press the power button, and the corresponding white disk indicator lights on, If an SSD is abnormal, the disk indicator blinks red.
If your M.2 hard drive is an already used hard drive, please find the new hard drive in the computer and you can start normal use. If your SSD is new, you need to initialize, partition, and create a new partition before you can use it.
New hard drive format
View “Computer-Manage – Disk Management” to find the new disk
Right-click the “Disk1”, then click “New Simple Volume”.
According to the instructions, choose the size of the partition, then click
“Next” to finish.
Then you can find the new hard disk in the “Computer”, it’s ready to be used.
SSD Clone
Insert SSD into the corresponding port, Back up the data of your USB drive before cloning, because cloning overwrites the original content of the USB drive. Target disk storage should ≥ source disk storage, connect to power supply, no need to connect to USB C cable.
PS: Only the Source port can plug into the converted AHC disk.
- Press the power switch, the corresponding white light on, (If an SSD is abnormal, the disk indicator blinks red.)
- When the SSD slot light is on, hold the clone button for 5
- Seconds, then the 25%-100% clone progress indicator light began to flicker, press the clone button again, 25%-100% blue clone progress indicator light began to flicker in a cycle. (SSD Slot light will flicker too), clone began
- When the 25% clone progress indicator light is on,in order to 25%-50%-75%-100%. When all the clone progress light is on and, SSD slot light is on, the clone succeeds. Turn off the power and remove the SSD.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>