foreVive 2 SB-330 Smartwatch User Manual
- June 7, 2024
- foreVive 2
Table of Contents
SB-330 SMARTWATCH
User Manual
Opis produktu
1. Touch interface
2. Function button
3. Charging connector
4. Heart rate sensor
To charge the smartwatch, connect the charging clip of the USB cable to the
charging plate on the back of the smartwatch. If successfully connected, the
charging icon appears on the interface.
Install “Forever Smart” app on the phone
Search and install the “Forever Smart” app from Google Play or App Store. Or
scan the following QR code to directly install the app.
https://apps.apple.com/us/app/id1289542004
https://play.google.com/store/apps/details?id=com.oplayer.forever
Connect the smartwatch with the phone
1. Enable Bluetooth on your smartphone.
2. Open the “Forever Smart” app on your smartphone, and then fill in all the
requested information in the “Settings” menu.
3. Tap “Connect device” in the “Settings” menu.
4. Select the smart watch icon to connect.
5. Choose your device name to connect it with your phone.
Unbind the smartwatch with a mobile phone
1. Open the “Forever Smart” app on your smartphone.
2. Tap “Disconnect device” in the “Settings” menu and confirm “OK”.
3. To disconnect your smartwatch with an iPhone, click “Disconnect device” in
the “Settings” menu of the “Forever Smart” app, and go to the Bluetooth
settings on your iPhone, then access and select the “Forget This Device”
option.
Operation introduction
• You can raise your hand or press the function button to turn on the screen.
• Press and hold the watch face interface, then slide left or right to change
the watch face.
• Press and hold the function button to turn on the smartwatch when powered
off.
How to use
Turn on : Press and hold the function button for 3 seconds.
Go to menu : Slide from left to right in the watch face interface.
Select a function : Slide up and down in the menu and then tap the icon.
Confirm : Tap the icon.
Exit the menu : Slide the interface from left to right.
Return to the watch face : Briefly press the function button in any
interface.
Check messages : Slide from bottom to top in the watch face interface.
Menu navigation
After turning on the smartwatch, the watch face interface is displayed.
When the watch face interface is displayed:
1, Go to the menu interfaces:
» Slide from left to right in the watch face interface to enter the menu
interfaces.
» Slide up and down to switch the menu interfaces.
» Tap the icon to enter the sub-menu. Slide from left to right to return to
the previous menu.
2. Go to the messages shortcut interface
» Slide from bottom to top in the watch face interface.
3. Go to other shortcuts interface
» Slide from top to bottom in the watch face interface.
Functions
Watch face interface
You can press the function button to go to the watch face interface quickly.
If you want to change the watch face of your smartwatch, press and hold the
current watch face for 3 seconds, then slide left or right to go through the
different watch faces and choose the one you like.
Shortcut
• Interface brightness
You can tap the brightness icon to adjust (+/-) the interface brightness.
• Find phone
If your smartwatch is connected with Forever Smart app, you can find your
phone by tapping this icon and your shut down
You can shut down your smartwatch by tapping this icon.
• Settings
You can go to settings of your smartwatch quickly by tapping this icon.
Raise hand to activate display
You can turn on or off function of raise hand to activate display by tapping
this icon.
Multi-Sport
Tap the “Sports” icon to enter the multi-sport mode. The smartwatch has 6 sports modes: walking, running, cycling, indoor run, hiking and swimming. Choose a sport mode you want, and then do sports. The smartwatch records your exercise data.
If you want to end the sports, slide the interface to right and tap the “End”
icon to finish your sports and save the data. The smartwatch displays your
exercise data. If you’ve connected your smartwatch with the “Forever Smart”
app via Bluetooth, you can also check your exercise data in the app.
Note : Exercise time should be more than 5 mins, distance should be more
than 0.1km, and calories should be more than 1 Kcal, otherwise, the data
cannot be saved.
Heart rate monitor
Tap icon to monitor your current heart rate. To exit the heart rate monitor,
slide the interface to right.
If you’ve connected your smartwatch with the “Forever Smart” app via
Bluetooth, and turn on “Healthy detection” in the advanced settings of the
app, you can also check your heart rate data in the app.
Sleep monitor
The smart watch automatically monitors your sleep between 9:30 p.m. and 11
a.m.
When you get up the next day, the smartwatch displays your sleep report about
the time of total sleep, light sleep, and deep sleep. If you’ve connected your
smartwatch with the “Forever Smart” app via Bluetooth, you can also check more
detailed sleep reports in the app. Alarm
You can set reminders in the “Forever Smart” app. When the alarm time is up,
the alarm icon is animated and the smartwatch vibrates.
Messages
Slide the watch face from bottom to top, and then you can check your phone calls, SMS, QQ, WeChat, Whatsapp, Facebook and Twitter notifications, etc. The messages will be automatically deleted by tapping the interface.
Weather
If you’ve connected your smartwatch with the “Forever Smart” app via
Bluetooth, the smartwatch displays the weather forecast. You can manually set
the city or automatically set a city in the “Forever Smart” app.
Remote capture
To use this feature, choose “Shake and take photo” in advanced settings of the
app and shake your hand 3 times to take a photo. With the remote capture
function, you can take pictures remotely from your smartwatch.
Music playback control
Tap the music icon to enter the music playback control interface.
You can select the previous/next song, and play/pause music. To exit music
playback control, slide the interface from left to right.
Sedentary reminder
Go to the “Advanced settings” under the “Settings” of the “Forever Smart” app
to set the time intervals (minutes), start time, and end time. Slide the
interface to the right to exit.
Settings
Tap icon Settings to enter the settings menu.
Bright screen display
You can set display here, such as change watch face, adjust screen brightness,
etc.
Vibration intensity
Choose 1,2 or 3 here for vibration intensity.
Languages
You can set smartwatch language here.
System
You can check the system of your smartwatch or shut down or reset your
smartwatch by tapping this icon.
TelForceOne S.A. declares that the product is compatible with requirements and other relevant provisions of the 2014/53/UE directive. You can download the declaration of product on the website https://sklep.telforceone.pl/en-gb/
References
- GSM accessories, Light Source, Printer Supplies, Computer, Car accessories, RTV accessories - sklep.TelForceOne.pl
- GSM accessories, Light Source, Printer Supplies, Computer, Car accessories, RTV accessories - sklep.TelForceOne.pl
- GSM accessories, Light Source, Printer Supplies, Computer, Car accessories, RTV accessories - sklep.TelForceOne.pl
- Akcesoria GSM, Oświetlenie LED, Tusze, Tonery, Źródła Światła, Materiały eksploatacyjne, hurtownia, dystrybutor, producent, importer - sklep.TelForceOne.pl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>