Maiwo K2024P 4 Bay M.2 NVMe SSD Cloner User Manual
- August 8, 2024
- MAIWO
Table of Contents
Maiwo K2024P 4 Bay M.2 NVMe SSD Cloner
Specification
| Product Name | MAIWO 4 Bay M.2 NVMe SSD Docking Station |
|---|---|
| Model | K2024P |
| Supported Drive | M.2 NVMe (M Key) |
| Product Interface | USB4.0 |
| Material | Aluminum Alloy |
=
Power Supply| 12V SA
System| Windows, Mac OS, Linux
Indicator
| The drive indicator is white and flashes when reading and writing. The power Indicator is blue. The clone indicator is blue.
Hard drive read and write
- Remove the case upwards from the arrow side.
- Insert silicone plugs into drive holes and insert M.2 NVMe SSD in 45°, then revolve plugs to fix SSD.
- Stick silicone pad on SSD, stick aluminum pad on silicone pad, and put the cover back.
- Connect the dock to the PC via data cable, and connect the power supply.
- Press the power button once, and the computer will find the hardware and automatically install the driver.
Note: If the old drive, the drive can be found in “Computer” and can read and write normally; If new drive, please initialize, partition, and format drives first.
New hard disk format
-
View “computer- Manage – Disk Management” to find the new disk.
Note: There are two formats when initialization, please choose MBR if your drives are smaller than 2TB, and choose GPT if your drives are larger than 2TB. -
Right-click “Disk 1”, then click “New Simple Volume”
-
According to the instructions, choose the size of the partition, then click “Next” to finish.
-
Then you can find the new hard disk in the “Computer, it s readyready tose.
Clone
-
Insert source drive into Source A and target drives into Target B/C/D, and connect to the power supply.
Note: No need to connect to a PC. The capacity of target drives must be larger than or equal to the source drive, otherwise, it cannot clone. -
Press the power button once; After all drive indicators light up, the long-press clone button and release after the 25% progress light is on and flashing, then the clone starts, clone finishes when 25%-100% indicators are fully on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>