BEGA 84652K3 Pole Top Luminaire Instruction Manual
- August 7, 2024
- BEGA
Table of Contents
BEGA 84652K3 Pole Top Luminaire
Specifications
- Application: Pole-top luminaire with two interfaces for light management components
- Light Distribution: Asymmetrical for in-depth illumination of surfaces and squares
- Mounting Heights: 4000 – 6000 mm
- Lamp Module Connected Wattage: 15.8 W
- Luminaire Connected Wattage: 18.4 W
- Colour Temperature: 3000 K / 4000 K
- Colour Rendering Index (CRI): > 80
- Luminous Flux: 3010 lm / 3095 lm
- Luminous Efficiency: 126.8 lm/W / 130.4 lm/W
- Rated Temperature: 25 – 65 °C
- Ambient Temperature: 25 – 65 °C
Product Usage Instructions
Dark Sky & Safety
The luminaire directs light evenly onto surfaces, avoiding emission into the upper half-space. Installation and operation must
FAQ
Q: Can I modify the luminaire on my own?
A: No, any modifications should be done by a qualified electrician to avoid damage and ensure safety.
Q: What is the purpose of the desiccant bag in the luminaire housing?
A: The desiccant bag is crucial for removing residual moisture and should not be removed from the housing.
Pole top luminaire
Instructions for use
Application
- Pole-top luminaire with two interfaces for the installation of light management components in accordance with Zhaga Book 18 Ed. 3.0 (Z-LEX-R), suitable for components
- Zhaga Book 18 Ed. 3.0 (Z-LEX-M), e.g. Zhaga Air Connector 71 210) With asymmetrical light distribution for in-depth illumination of surfaces and squares.
- For mounting heights 4000 – 6000 mm.
Product description
- Luminaire made of aluminium alloy, aluminium and stainless steel BEGA Unidure® coating technology Colour graphite Safety glass, antireflection-coated Silicone gasket Reflector surface made of pure aluminium For pole top ø 76 m
- Inner diameter of the pole min. 62 / max.70 mm Slip fitter insert depth 100 mm 2 built-in interfaces according to Zhaga Book 18 Ed. 3.0 (Z-LEX-R) with closing cap in the luminaire head
- Connecting cable H05RN-F 2 × 1@
- Cable length 6 m
- Complies with flicker requirements in accordance with IEEE 1789, DIN IEC/TR 63158, DIN IEC/TR 61547-1 LED power supply unit 220-240 V 0/50-60 Hz DC 176-280 V
- During DC operation the LED power is reduced to 15 % BEGA Thermal Control®
- Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
- Safety class II
- Protection class IP 66
- Dust-tight and protection against strong water jets
- Impact strength IK07
- Protection against mechanical impacts < 2 joule
- Safety mark
- Conformity mark
- Horizontal wind catching area: 0.035 m² Weight: 6.2 kg
- This product contains light sources of energy efficiency class(es) C
Dark Sky
The light of this luminaire is directed evenly and highly efficiently onto the
surface to be illuminated. No light is emitted into the upper half-space of
the luminaire.
Safety
- The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
- To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com.
Lamp
- Module connected wattage 15.8 W
- Luminaire connected wattage 18.4 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 65 °C
84 652 K3
- Module designation LED-1081/830
- Colour temperature 3000 K
- Colour rendering index CRI > 80
- Module luminous flux 3010 lm
- Luminaire luminous flux * 2334 lm
- Luminaire luminous efficiency * 126,8 lm / W
84 652 K4
- Module designation LED-1081/840
- Colour temperature 4000 K
- Colour rendering index CRI > 80
- Module luminous flux 3095 lm
- Luminaire luminous flux * 2400 lm
- Luminaire luminous efficiency * 130,4 lm / W
Installation
- Undo hexagon socket head screw (wrench size 4 mm) of the closing cap (Fig. A) and remove closing cap.
- Lead luminaire connecting cable into the pole. Put on and align luminaire.
- Secure hexagon cap nut (wrench size 13 mm) and lateral hexagon socket head screw (wrench size 4 mm) firmly.
- Torque 12 Nm each.
- Insert closing cap and tighten it firmly with the hexagon socket head screw.
- When installing light management components on site according to Zhaga Book 18 (Ed.
- 2.0), remove the upper or lower factory-fitted sealing cap (Fig. B) from the luminaire housing by turning it to the left, depending on the application.
- Insert the light management components into the socket and turn them clockwise until they stop.
- Please observe the manufacturer’s opearting instructions and data sheets.
- The luminaire may only be operated with inserted Zhaga components or closing caps.
The electrical connection of the luminaire must be made with the appropriate
protection class and safety class using suitable connection terminals (not
included in the scope of delivery) on the luminaire power supply cable.
We recommend you use BEGA connection boxes for this purpose.
Note correct configuration of the mains supply cable. The phase is connected
to the brown wire (L) and the neutral conductor to the blue wire (N).
In case these interface are not used the luminaire will be operated at full
light output.
Please note:
Do not remove the desiccant bag from the luminaire housing.
It is needed to remove residual moisture.
Replacing the LED module
- The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
- The module can be replaced by qualified persons using standard tools.
- Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
- Inspect and, if necessary, replace the luminaire gaskets.
- Defective glass must be replaced.
- Close the luminaire.
Accessories
For this luminaire we recommend the following BEGA luminaire poles:
Tapered aluminium poles · lacquered with access door and C-clamp
- 70 914 Pole with anch.section H 4000 mm
70 725 Pole with anch.section H 4500 mm
70 915 Pole with anch.section H 5000 mm
70 916 Pole with anch.section H 6000 mm
70 791 Pole with baseplate H 4000 mm
70 792 Pole with baseplate H 4500 mm
70 794 Pole with baseplate H 5000 mm
Cylindrically stepped aluminium poles lacquered · with door und C rail
- 70 901 Pole with anch.section H 4000 mm
70 903 Pole with anch.section H 5000 mm
70 905 Pole with anch.section H 6000 mm
70 900 Pole with baseplate H 4000 mm
70 902 Pole with baseplate H 5000 mm
70 904 Pole with baseplate H 6000 mm
Tapered poles made of laminated wood in accordance with DIN EN 14080 and aluminium with access door and C-clamp
- 71 193 Pole with baseplate H 4000 mm
- 71 194 Pole with baseplate H 5000 mm
- 71 195 Pole with baseplate H 6000 mm
Please see the instructions for use of the luminaire poles for suitable connection boxes.
- 71 210 Zhaga Air Connector
- 71 328 Zhaga Motion and light sensor
For the accessories a separate instructions for use can be provided upon request.
Spares
- Spare glass with frame graphite 25 000 087
- LED power supply unit DEV-0394/700
- Zhaga Lampholder 63 000 577
- Cover cap 63 000 578
- LED module 3000 K LED-1081/830
- LED module 4000 K LED-1081/840
- Reflector 76 001 943
- Gasket housing 83 002 042
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>