KUPPERSBERG DS 590 W Connecting Element for Tumble Dryer Instruction Manual

KUPPERSBERG DS 590 W Connecting Element for Tumble Dryer

INSTRUCTION MANUAL

MODEL: DS 590 W, DS 590 GR

INSTALLATION INSTRUCTIONS

Before installing the connection bracket, please read the following in- stallation instructions carefully:

1. This instruction manual is only for the installation instructions of the upper and lower connections of the washing machine and dryer. The instruction manuals of the washing machine and dryer are placed with the machine respectively.
2. Please select a suitable connection location, taking into account the connections of water inlet pipes, drain pipes and power lines.
3. Please leave enough installation space for the installation of water inlet pipes, drain pipes, power lines, etc. At the same time, there should be enough space on the back of the machine to ensure that the drain pipe is connected smoothly and does not bend.
4. Before connecting the dryer, adjust the feet of the washer so that it is level.
5. Please do not place overweight loads on the connecting bracket pull-out plate (maximum load-bearing capacity is 10 kg).

WARNING

• The maximum load-bearing capacity of the drawer is 10 kg.
• The clothes dryer should be installed and fixed on the countertop of the washing machine.
• The installation of the connection between the dryer and the washing machine needs to be done by professionals.

The connecting bracket box contains the following accessories

Installation

1. Put the connecting bracket on the top cover of the washing machine, adjust the position of the connecting bracket so that the left and right sides are evenly spaced from the left and right sides of the washing machine top cover, and the front boss is flush with the edge of the front groove of the washing machine top cover.

2. Fix the connecting bracket and the top cover of the washing ma-chine with 4 Tapping Screws.

3. Remove the bottom 2 screws on both sides of the back of the dryer and set it aside for later use.

4. Adjust the height of the four feet of the dryer so that the height limit plugs of the feet can just be inserted, and the height is about 11.5 mm.

5. Pull the drawer to the halfway position.
6. Lift the dryer and place it horizontally in the connection bracket above the washing machine. The four feet of the dryer should be placed in the four holes of the connection bracket.

7. Take the 2 screws that were removed just now, pass the screws through the screw holes connecting the bracket and the lower part of the rear panel of the dryer, and then fasten them in place.

8. Fasten the anchor buckle.

9. Push the drawer back to its original position to complete the installation.

MANUFACTURER:

M&G HAUSGERATE GMBH
Potsdamer Str. 92 10785 Berlin
COMPANY AUTHORIZED BY THE MANUFACTURER:
LLC «MG Rusland», 141400
Moscow region, Khimki, Butakovo, 4
info@kuppersberg.ru
Made in PRC

Specifications:

• Product Name: Pull-out Drawer for Laundry
• Model: DS 590 W, DS 590 GR
• Manufacturer: M&G HAUSGERATE GMBH
• Maximum Load-bearing Capacity: 10 kg
• Height Limit Plug: 11.5 mm

Product Usage Instructions:

Installation Instructions:

1. Read all installation instructions carefully before proceeding.
2. Select a suitable location considering water inlet pipes, drain pipes, and power lines.
3. Ensure enough space for installation and proper connection of pipes and power lines.
4. Adjust washing machine feet for levelness before connecting the dryer.
5. Avoid placing loads over 10 kg on the pull-out plate.
6. Professional installation is recommended for the washing machine.

Installation Steps:

1. Place the connecting bracket on the washing machine top cover, ensuring even spacing.
2. Secure the bracket with 4 Tapping Screws.
3. Adjust the dryer feet height to fit height limit plugs.
4. Pull out the drawer halfway and lift the dryer onto the connection bracket.
5. Secure the dryer to the bracket using screws and foot buckles.
6. Push the drawer back to complete installation.

Frequently Asked Questions (FAQ):

Q: What is the maximum load-bearing capacity of the pull-out drawer?

A: The maximum load-bearing capacity is 10 kg. Do not exceed this limit.

Q: Is professional installation necessary for the washing machine?

A: Yes, it is recommended to have the washing machine installed by professionals for safety and proper setup.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>