KUPPERSBERG INLINEA 52/72 Extractor Hood Instructions

: June 12, 2024
: Kuppersberg

Table of Contents

KUPPERSBERG INLINEA 52/72 Extractor Hood
Product Information
Product Usage Instructions
SAFETY PRECAUTIONS
FUNCTION
Built-in hood INLINEA 52\72
Mounting and dimensions
Cleaning and maintenance
Troubleshooting
Helpful information
Intensity of typical noise sources
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KUPPERSBERG INLINEA 52/72 Extractor Hood

Product Information

Product: Inlinea 52/72 Extractor Hood
Language: German
Technical Passport: Dunstabzugshaube

Section 1: Safety Precautions

This section provides important safety guidelines for the use of the extractor hood. It emphasizes the prohibition of using materials other than those specified by the manufacturer.

Section 2: Mounting and Dimensions

This section provides information on the installation and dimensions of the Inlinea 52/72 extractor hood. It includes a diagram indicating minimum distances to be maintained from electric and gas stoves.

Section 3: Cleaning and Maintenance

This section provides instructions on how to clean and maintain the extractor hood. It includes specific information on removing the charcoal filter when operating in recirculation mode.

Section 4: Troubleshooting

This section provides a troubleshooting table for common issues that may arise with the extractor hood. It includes solutions for problems such as blown fuses, malfunctioning lamps, and improper installation.

Section 5: Interesting Facts

This section provides interesting information about sound levels and their sources. It includes a table indicating sound sources and their corresponding decibel levels.

Serial Number: [Serial Number]

The serial number can be found on the product.

Note: The user manual provided is in German. Please refer to the original manual for accurate instructions in your preferred language.

Product Usage Instructions

Installation and Mounting

Ensure the minimum distances specified in the manual are maintained when installing the Inlinea 52/72 extractor hood.
Refer to the diagram provided in Section 2 for proper placement in relation to electric and gas stoves.

Cleaning and Maintenance

To clean the extractor hood, follow the instructions provided by the manufacturer.
When operating in recirculation mode, refer to Section 3 for instructions on removing the charcoal filter.

Troubleshooting

If the fuse is blown or there is no voltage in the network, ensure that the plug is securely inserted into the socket.
If the lamp does not light up, check if the fuse is blown or if the lamp is properly installed. Replace the lamp if necessary.
Avoid using natural wood components in a way that violates the operating conditions of the product.

DEAR CUSTOMER,

Thank you for purchasing our equipment! We are sure that appliances of the KUPPERSBERG brand, which are modern, functional and made of high quality materials and components, will be a reliable assistant in your kitchen.
Please read this manual carefully before starting any installation work. It will help you avoid premature failure, as well as extend the life of your appliance to the maximum possible.
Please note that the installation of this appliance must be carried out by a qualified technician and in accordance with these instructions. The manufacturer is not liable for any consequences of failure to observe this condition.

Caution!

The manufacturer is not responsible for any possible errors or misprints in this manual. The manufacturer reserves the right to make any changes, without prior notice, to design, outside appearance and scope of supply of appliance, which will be considered as necessary and useful according to the manufacturer’s point of view. Possible modifications will not affect the basic properties, including those that relate to safe operation of the appliance.

SAFETY PRECAUTIONS

Assembling and electrical connection of the appliance must be carried out by skilled technicians of authorized service center.
The appliance is designed to operate on 220-240 V AC. Make sure that the technical parameters of your home power supply system correspond to the data for the power supply. If parameter values are above or below the specified range, the use of the appliance is prohibited.
Do not connect the kitchen air cleaner to the ventilation channels that are used to remove smoke and fumes from the equipment operating on any other energy sources except electric one.
The appliance is to be connected only to an earthed power supply system.
Do not cook flammable foods below the kitchen air cleaner.
Use aluminum filter that comes with the appliance. The use of other materials is prohibited!
Do not connect the appliance to the power supply system, until the assembly and installation of the ap-pliance is completed.
Do not use the appliance with-out the aluminum filter in place.
Do not touch the lamps.
Do not remove the aluminum filter while the appliance is in opera-tion.
Do not disconnect the appli-ance from the power supply system directly. If necessary, turn the appli-ance off using the control panel and, only after that, unplug it from the power supply system. When switch-ing on: first connect the appliance to the power supply system, then switch it on using the control panel, but not vice versa!
The appliance requires regu-lar cleaning and maintenance work.
When installing the appli-ance, observe the required distance between it and the cooking surface of your stove:
for an electric stove: at least 65 cm
for a gas or gas-electric stove: at least 75 cm (pic.1)
Do not allow children to play with packaging materials, it can be dangerous!
The appliance is allowed to be turned on only once the pots and/or pans are placed on the stove.
For best air cleaning in your kitchen, do not turn off the appliance immediately after the cooking pro-cess is completed: let the appliance run for a further 15 minutes. For this purpose you can also use the timer function (the button «Auto Switch Off Timer» on the control panel).
Ensure adequate ventilation in the kitchen, if a gas stove is operated simultaneously with the appliance.
In case of any malfunctions, contact your nearest authorized ser-vice center.
If the kitchen hood is sup-posed to operate in air discharge mode, then during installation it is important to provide a duct of the corresponding diameter. To prevent loss of performance caused by aero-dynamic resistance of the duct, the air duct must not be too long, or curved. Never restrict the duct size, or make sharp bends. In addition, it is preferable to use smooth PVC duct (round or flat), rather than the flexi-ble corrugated one because bends of a corrugated duct increase the noise level of the hood.
The manufacturer does not bear any responsibility for any pos-sible damage, in case of non-compli-ance with above precautions.

FUNCTION

Touch Board : Light
Turn on light by touching “ ”, LED backlight will be on. Turn off the light by touching “ ” again.

“ ”: Motor Speed 1
Turn on the motor speed 1 by touching “ ”, LED backlight will be on . Turn off the motor speed 1 by touching “ ” again

“ ”: Motor Speed 2
Turn on the motor speed 2 by touching “ ”, LED backlight will be on. Turn off the motor speed 2 by touching “ ” again.

“ ”: Motor Speed 3
Turn on the motor speed 3 by touching “ ”, LED backlight is on. Turn off the motor speed 3 by touching “ ” again.

Time Delay Switch

When the motor is running, to touch the related “ ” or “ ” or “ ” or “ ****” for more than 0.5S to enter the time delay function, the backlight is flashing and the motor will be stopped after 5 minutes. When the backlight in flashing, you touch the related switch again, then the motor will be stopped directly
When pressing , the light is turned on and the backlight is turned on, also. Pressing again , the light turns off, backlight turns off also.
: Turn on the motor by pressing Pressing again , the motor turns off.:
Turn on the motor by pressing “+” or “-”.
Adjust the speed by pressing “+” or “-”. : To enable the timer by simultaneously pressing when the motor is turned on. Timer that the motor is turned off after 5 minutes of work. Repeated pressing , Timer Cancel

Built-in hood INLINEA 52\72

Width…………………………………………520-720 mm
Control……………………………………….Touchscreen
Suction power ……………………………………850 m3
Light bulbs……………………………….LED, 2х3.5 W
Diameter of the air discharge pipe……………………………………………120-150 mm
Voltage…………………………….220-240 V / 50 Hz
Modes of operation………………Air discharge / Recirculation
Noise level…………………………………….. 42-56 dB

Accessories (optional)

Charcoal filter…………………………………………..С6С

Mounting and dimensions

Please unpack and inspect the appliance! Before starting installation, make sure that the hood has no obvious transport damages. If such defects are detected, do not install or connect the appliance to the mains.

Cleaning and maintenance

Caution! Before you start cleaning the appliance, disconnect it from the power supply.

Aluminum filter

Aluminum filter is designed to trap grease particles out of the flow of air running through it. For this reason, the filter needs regular cleaning. The cleaning interval depends on the frequency of use of the air cleaner.
Generally, it is recommended to clean it once a month.
To do this, remove the filters, wash them in water with a neutral liquid detergent, dry them, then set them back in the air cleaner. Over time, filters may change color due to a regular washing.
This is a natural process, which does not indicate a defect, so filter replacement is not required.
The aluminum filters can be washed in the dishwasher.

How to remove aluminum filters:

Press on the latch of the filter lock.
Pulling down a bit, remove the filter.

In order to put the filters in place after cleaning, follow the above instructions in reverse order.

Carbon filter (used in recirculated air mode)

Carbon filter is designed to trap odors and fumes while cooking. It is used in cases where there is no possibility to connect the air cleaner to a special ventilation duct for discharging air outward. When operating the appliance with a carbon filter, contaminated air is sucked into the appliance and passes through a carbon filter, and then clean air is supplied to the kitchen. The carbon filter should be replaced at regular intervals. The interval of filter replacement depends on the frequency of use of the air cleaner, style of cooking and frequency of the aluminum filter cleaning. Generally, it is recommended to replace the carbon filter once every 4 months.

How to remove carbon filter:

Remove aluminum filters.
Turn the carbon filter to the left and pull it.
Replace the old carbon filter with the new one.
Put the filter back into place.

If necessary, clean the outside of the air cleaner with a soft, damp cloth. Do not use any abrasive cleaning agents. For painted stainless steel surfaces: to avoid scratching it is recommended to wipe them with a soft, damp cloth in the painting direction. Do not remove the lamp cover during the surface cleaning process.

Caution!
Do not use the steam generators for cleaning.
Caution!
Not following the above rules for cleaning the appliance and replacing filters may cause fire.

Replacing lamps

Before replacing lamps, disconnect the appliance from the power supply. Then, with a screwdriver, pry and remove the lamp cover, while supporting it from below. Remove the burned-out lamp and replace it with a new one. Put the lamp cover into place, press it slightly and fix it. Caution: do not touch the lamp with your fingers, it significantly reduces its lifetime. Use a soft, dry cloth.

Caution!
If you need to transport the air cleaner, first of all, disconnect it from the power supply and proceed with disassembly. It is recommended that you transport it in the original packaging. If this packaging is not available, package the appliance using materials that prevent possible damage resulting from transportation.

Troubleshooting

Malfunction	Possible cause	Troubleshooting action

The appliance does not operate

| Faulty fuse Plug is not properly

inserted into the outlet There is no voltage in the power supply system

| 1. Check the fuse of the appliance

2. Make sure that plug is properly inserted into the

outlet

Suction power is not

sufficient

| Incorrect speed selected Filters are clogged| 1. Increase suction speed of hood

2. Clean or replace filters

The lamp is not lighting

| Faulty fuse

The lamp is burned out or incorrectly installed

| 1. Check the fuse of the appliance

2. Make sure that the lamp is installed correctly or

replace it

Very often a malfunction of the appliance occur for minor reasons. So, before you call for service center, please check whether you can troubleshoot yourself. For this purpose please check the following possible causes of malfunctions.

Please note!
The following shall not be considered as defects of the Product

Cooker hoods

| Minor technical smells coming from a new product during the initial operation period
---|---
Violation of the operating conditions of the components of the product, made of natural wood
Sound of the air flow passing through the ventilation ducts and

channels of the product

Discoloration of housing elements of the product when using the product
Black discoloration and deformation of fat filter elements when

using the product

Helpful information

Physical characteristics of the sound volume (the sound pressure level) is measured in decibels (dB). «Noise» is a chaotic mix of sound.
The human ear can detect sounds with sound volume of 10-15 dB and above.
When choosing a kitchen hood, it is necessary to pay special attention to technical indicators such as the noise level. This indicator is very important, because, and that’s beyond a shadow of a doubt, each of us spends a lot of time on the kitchen. It is especially common for women who love to please their loved ones with delicious cooked dishes.
According to the surveys, 40% of women do not use kitchen hoods for their intended purpose (it refers to the process of air suction), precisely because they areannoyed with the noise level.
Consequently, such a necessary and needed in the kitchen appliance, kitchen air cleaner, designed to remove airborne odors, grease, soot and smoke, becomes almost meaningless.
In comparison with many other manufacturers of kitchen hoods, KUPPERSBERG hoods are comfortably quiet. Even at maximum suction power of 1000 m3, noise level reaches only 42 dB. This allows you to make the cooking process the most comfortable and helpful.
For more complete understanding of the scale of decibels, you can compare parameters of the following guidelines:

Intensity of typical noise sources

Approximate sound pressure level dB|

Characteristics

|

Sound source and distance

160| Shock, trauma| Shot of a gun of 0.303 caliber close to your ear
150| Contusion, trauma| Rise of the lunar rocket, 100 m
140| Contusion| Rise of the jet plane, 25 m
120| Almost unbearable| Engine room of submarine Jackhammer, 1 m
---|---|---
100| Extremely noisy| Very noisy factory Subway car (intermittently)

90

|

Very noisy

| Heavy diesel truck, 7 m

Road drill (without muffler), 7 m

Railway freight wagon, 7 m

80| Very noisy| Ringing alarm clock, 1 m Motorcycle with a silencer, 1 m

75

|

Noisy

| Inside railway carriage Shout, 1 m

Loud laughter, 1 m

70

|

Noisy

| Inside a small car, moving at a speed of 50 km/h Home vacuum cleaner, 3 m

Loud conversation, 1 m

65

|

Clearly audible

| Typewriter Normal conversation, 1 m

40

|

Quite audible

| Institution, where there are no special sources of noise

35

|

Hardly audible

| Room of a quiet apartment

Very muffled conversation

25

|

Quiet

| Rural areas located far from roads Whisper of a person, 1 m

Recommendations of the manufacturer:

Check the correctness of the warranty card when purchasing the appliance.
Follow the instructions of the manual when operating the appliance.
Use only authorized service centers.
After carrying out any repairs by an authorized service center, the specialists of the centre should provide you with a description of the work conducted. This information may be useful for you in the future.
The lifetime of the product: 10 years.

SERIAL NUMBER CHART:

ORGANIZATION ACCEPTING CLAIMS: