SPEEDLINK SL-860100-BK Mandas LED Gaming Headset User Guide
- June 5, 2024
- speedlink
Table of Contents
SPEEDLINK SL-860100-BK Mandas LED Gaming Headset
CHARGING
Connect the headset to a free USB port on your PC, gaming console or another
USB power source, using the charging cable provided.
Please allow 10 hours of charging time before first use.
WIRELESS USAGE
Plug the USB receiver into a free USB port on your PC, PS5, PS4 or Nintendo
Switch* console and turn the headset on. Headset and USB receiver will start
pairing automatically, which is indicated by flashing LED light.
Once successfully paired, the LED light will remain lit. When reaching low
battery levels the headset will make
a beeping sound.
WIRED USAGE
Connect the headset to your Xbox One* controller, smartphone, tablet or audio device, using the 3.5mm audio cable provided and turn the headset on. During wired usage the audio levels can be adjusted using the connected device only.
POWER SAVING MODE
After 10 minutes of inactivity the headset will go into standby mode which is indicated by flashing LEDs. To reactivate the headset, press the volume button. After 5 minutes of standby mode the headset will go into sleep mode and needs to be switched off and on again to be reactivated.
Speedlink declares that this product complies with the directives listed in the section ‘Conformity notice’.
INTENDED USE
This product is intended to be used as a headset for connecting to a
computer/other audio source and is for indoor home/office use only. It
contains no user-serviceable parts. Do not disassemble it and stop using it
immediately if damaged. Speedlink GmbH accepts no liability whatsoever for any
damage to this product or injuries caused due to careless or improper use or
for purposes for which it is not intended.
Please keep this information for later reference.
DE
Technischer Support: www.speedlink.com
Sicherheitshinweise: www.speedlink.com
GET STARTED
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Please note that the failure to observe these instructions can cause product damage, explosion, fire and/or electric shocks!
Only use the devices as indicated in the user guide.
-
Do not open or repair them.
-
Do not expose the devices to liquids, heat or cold.
-
Do not use the devices in a damp environment.
-
Clean the devices with a dry cloth.
-
Keep the devices and all loose parts away from children, pets and unauthorized persons.
-
Only use the devices with the appropriate provided accessories/cables.
-
Disconnect cables from the devices if they will not be used for a long time. When disconnecting the cables, don’t pull on the cord
but on the plug. -
Don’t use cables in any way other than mentioned in the user guide; don’t bend, cut, extend, knot or step on them.
-
Do not insert any foreign objects into the openings of the devices.
-
If the devices are damaged in any way or get too hot, stop using them immediately.
-
Take caution when using devices that emit radio signals if you have a pacemaker or are dependent on other sensitive
electronic life aids.
Safety instructions in further languages: www.speedlink.com.
CONFORMITY NOTICE
Operation of the device (the devices) may be affected by strong static,
electrical or high-frequency fields (radio installations, mobile telephones,
microwaves, electrostatic discharges). If this occurs, try increasing the
distance from the devices causing the interference.
Conformity notice in further languages:
www.speedlink.com
CONFORMITY NOTICE
IMPORTER/MANUFACTURER:
Speedlink GmbH
Im Dorf 5
27404 Heeslingen
Deutschland
Phone: (+49) 4287 9244-0
PRODUCT DETAILS:
Product no.: SL-860100-BK
Type description: MANDAS LED Gaming Headset – Wireless, black
THE PRODUCT COMPLIES WITH THE FOLLOWING DIRECTIVES:
- RED 2014/53/EU
- RoHS 2011/65/EU
- For a full declaration of conformity, the latest user guide or
- RF frequency range: 2.403GHz – 2.478GHz
- RF power transmission: < 9dBm
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>