kwmobile 53927 Cctv Dummy Camera with LED User Manual

kwmobile 53927 Cctv Dummy Camera with LED

Specifications

• Battery type: 2 AAA Batteries
• Net weight: 105 g
• Dimensions (W x H x D): 9.2 x 9.2 x 6.5 cm

Product Usage Instructions

Operation

1. Inserting batteries:
   • Turn the housing and the mounting ring in opposite directions to remove the dummy camera.
   • Remove the mounting ring, ring lip, and dummy camera from the housing.
   • Turn the dummy camera in opposite directions to remove the battery cover.
   • Insert 2 AAA batteries (not included) into the battery compartment following correct polarity.
   • The LED indicator will automatically turn on.
   • Replace the battery cover and lock it in place by turning clockwise.
   • Put the dummy camera back in the housing.
   • Replace the ring lip and mounting ring, locking them in place by turning clockwise.

Installation (Wall Mounting)

1. Remove the mounting ring.
2. Place the mounting ring on the wall and mark 3 holes for drilling.
3. Drill 3 holes 2.5 cm deep using a drill bit size 17/64.
4. Insert wall plugs into the 3 holes.
5. Secure the mounting ring on the wall with screws.
6. Attach the product housing onto the mounting ring and lock it in place by turning clockwise.

Frequently Asked Questions (FAQ)

• Are batteries included with the product?
  No, the batteries are not included with the product. You need to purchase 2 AAA batteries separately for operation.

• How can I dispose of the product?
  For information about proper disposal methods, please contact your local electronic waste management authority or household waste disposal service.

Keep these operating instructions in a safe place for future reference. These operating instructions are an essential part of the product and must be passed on to the new owner if the product is sold.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

• Children should be supervised to ensure that they do not play with the product.
• Do not use the product outdoors.

Battery Warnings

NOTICE The batteries are not included.

• Always insert batteries correctly with regards to polarity (+ and –) marked on the battery and the product.
• Exhausted batteries should be immediately removed from product and properly disposed.
• Remove batteries from product if it is not to be used for an extended period of time unless it is for emergency purposes.
• Do not dispose of batteries in fire.
• Keep batteries out of the reach of children.

INTENDED USE

• This product is intended for household use only.
• This product is intended to be used in dry indoor areas only.
• No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

BEFORE FIRST USE
DANGER Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

• Remove all packing material and check if all parts are included.
• Check the product for transport damages.
• In case of missing parts or a defect, please contact our customer service and provide proof of purchase.

PRODUCT DESCRIPTION

OPERATION

Inserting batteries

1. Turn the housing of the product and the mounting ring (E) in opposite direction.
2. Lift off the mounting ring (E), ring lip (D)and remove the dummy camera (B) from the housing.
3. Turn the two halves of the dummy camera (B) in opposite direction to remove the battery cover.
4. Insert batteries (not included) into the battery compartment (C) making sure correct polarity as marked on the battery and product. The products LED indicator (A) automatically goes on.
5. Replace the battery cover and turn clockwise to lock in place.
6. Place the dummy camera (B) back in the products housing.
7. Replace the ring lip (D) and mounting ring (E) and turn clockwise to lock in place.

Installation (wall mounting)

1. Remove the mounting ring (E).
2. Place the mounting ring (E) on the wall and mark the 3x holes for drilling.
3. Drill 3x holes 2.5 cm deep using drill bit size 17/64″.
4. Insert the wall plugs (G) into the 3x holes.
5. Place the mounting ring (E) on the wall and secure with screws (F).
6. Insert the product housing onto the mounting ring (E) and turn housing clockwise to lock into place.

CLEANING AND MAINTENANCE

• To clean the product, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

DISPOSAL

The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its collection centers for electrical and electronic equipment recycling.

For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.

SPECIFICATIONS

SellerX Commerce GmbH
Jägerstr. 41, 10117 Berlin Germany

Made in China

Documents / Resources

| kwmobile 53927 Cctv Dummy Camera with LED [pdf] User Manual
53927 Cctv Dummy Camera with LED, 53927, Cctv Dummy Camera with LED, Dummy Camera with LED, Camera with LED
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>