Honeywell CK65 CK3 Single Dock AD20 Instructions
- June 7, 2024
- Honeywell
Table of Contents
Honeywell CK65 CK3 Single Dock AD20
Instructions
Use only UL Listed power supply, which has been qualified by Intermec/Honeywell with output rated by 12 VDC and 2.5 A with the device and an appropriate AC power cord.
Caution: See compliance insert for restrictions associated with this product.
Support
To search our knowledge base for a solution or log into the Technical Support Portal and report a problem, go to www.hsmcontactsupport.com
Documentation
Product documentation is available at www.honeywellaidc.com
Limited Warranty
For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty.
Patents
For patent information, see www.hsmpats.com
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>