ROBENS 690363 Suilven Rechargeable Lantern Instruction Manual

SUILVEN
RECHARGEABLE LANTERN
MODEL: 690363 / FC049 INSTRUCTION MANUAL

690363 Suilven Rechargeable Lantern

INSTRUCTIONS FOR USE

1. Power button & indicator
2. Rubber hanger
3. Carabiner
4. Charging cable
5. USB-C power input
6. USB-C male plug
7. USB-A male plug

INSTALLATION & USE

Use of the lantern:

• The rechargeable lantern is charged by the included charging cable (4).

• Fully charge the lantern before first use by connecting the USB-C male plug (6) to the USB-C power input (5) onlantern, and the USB-A male plug (7) to a suitable power source (5V1A).

• While charging the power button & indicator (1) lights red. When fully charged, it lights green.
  If the battery level is below 10% the indicator will light red.

• The lantern is turned on by pressing the power button (1) once.

• Press the power button additional times to toggle through the four different light modes.
  Press and hold for stepless dimming of any of the four light mode.
  1. White light
  2. Warm yellow light (SMD)
  3. White light (SMD)
  4. White light + White light (SMD) – 1 + 3 combined

• All the four light modes are dimmable from 10 – 100%. To adjust the strength of a light function, press and hold the power button on the light function you would like to adjust.

• Red night light:
  To toggle between white/yellow & red light, quickly press the power button twice when it is turned on.
  There are three red light functions (not dimmable):
  – Red solid light
  – Red blinking
  – Red blinking (SOS)

• The lantern is turned off by pressing the power button again.

• The lantern can be used hanging. The included carabiner (3) can be attached to the rubber hanger (2) and hung in any hanging points, in e.g. your tent, under a tarp or from a branch.

• Do not stare into the light source.

• Do not modify the product.

CLEANING & MAINTENANCE

Lantern can be cleaned with water and a damp rag.
Do not use corrosive liquids to clean the lamp as this might damage the lantern.

LIGHT SOURCE

LED Light source and control gear is not replaceable. This would introduce weak points in the construction, that could reduce the lifetime of the product .

DISASSEMBLY & DISPOSAL

1. Unscrew and remove the three nuts on top of the lampshade using a wrench.

2. Detach the lampshade and base from the metal grid by pulling and twisting the components until they come loose.
   Dispose of plastic components, including polycarbonate lamphouse and rubber hanger according to local regulations. Dispose of metal components, including lampshade, carabiner, screws and grid according to local regulations.

3. Cut wires to allow removal of battery. Dispose of the batteries according to local regulations.

4. Unscrew screws & cut wires to allow removal of the PCB board. Dispose of electronics, such as circuit board, light source & electric wires according to local regulations. Dispose of remaining components according to local regulations.

TECHNICAL DATA

5V 3.8W
Input: 5V 1A
Battery: 3.7V 2500mAh
Degree of protection: The product is water resistant to IPX4
Class 3 appliance

Robens ® is a reg. trademark of Oase Outdoors
EU: Kornvej 9, DK-7323 Give, Denmark
UK: One Glass Wharf, Bristol, BS2 0ZX
Email:info@robens.de
ROBENS.CO.UK

Documents / Resources

| ROBENS 690363 Suilven Rechargeable Lantern [pdf] Instruction Manual
690363 Suilven Rechargeable Lantern, 690363, Suilven Rechargeable Lantern, Rechargeable Lantern
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>