BEGA 85197K3 Pole top Luminaire Instruction Manual

August 2, 2024
BEGA

BEGA 85197K3 Pole top Luminaire

Specifications

  • Application: Pole-top luminaire with asymmetrical flat beam light distribution
  • Mounting Heights: 3500 – 5000 mm
  • Lamp Module Connected Wattage: 35.3 W
  • Luminaire Connected Wattage: 38.5 W
  • Colour Temperature: 3000 K
  • Colour Rendering Index (CRI): > 80
  • Module Luminous Flux: 6675 lm
  • Luminaire Luminous Flux: 3544 lm
  • Luminaire Luminous Efficiency: 92.1 lm / W

Installation Instructions

  1. Lead luminaire connecting cable into the pole and put on the luminaire.
  2. Align the luminaire and fix it in place.
  3. Secure the luminaire by tightening the lateral hexagon socket head screws M8 firmly with a torque of 12 Nm.
  4. Do not remove the desiccant bag from the luminaire housing as it is essential for removing residual moisture.

Accessories

For this luminaire, we recommend the following BEGA luminaire poles.

  • 70 913 Pole with anchoring section H 3500 mm
  • 70 914 Pole with anchoring section H 4000 mm
  • 70 725 Pole with anchoring section H 4500 mm
  • 70 915 Pole with anchoring section H 5000 mm
  • 70 789 Pole with baseplate H 3500 mm
  • 70 791 Pole with baseplate H 4000 mm
  • 70 792 Pole with baseplate H 4500 mm
  • 70 794 Pole with baseplate H 5000 mm

FAQ

Q: Can I install the luminaire myself?

A: No, the installation and commissioning must be carried out by a qualified electrician to ensure safety and compliance with regulations.

Q: What should I do if I need additional overvoltage protection?

A: You can find separate overvoltage protection components on our website at www.bega.com.

Dimensions

Instructions for use

Application

  • Pole-top luminaire with asymmetrical flat beam light distribution.
  • For mounting heights 3500 – 5000mm.

Dark Sky

  • The light from this luminaire is directed evenly and highly efficiently onto the surface to be illuminated.
  • Less than 1% of the luminaire luminous flux is emitted into the upper halfspace of the luminaire.

Product Description

  • Luminaire made of aluminum alloy, aluminum, and stainless steel
  • BEGA Unidure® coating technology
  • Colour graphite
  • Clear synthetic cover with optical structure
  • Silicone gasket
  • Reflector made of pure anodized aluminum
  • For pole, top ø 76mm
  • Slip fitter insert depth 60mm
  • Connecting cable X05BQ-F 4×1 mm²
  • Cable length 5m
  • BEGA Ultimate Driver®
  • Complies with flicker requirements by IEEE 1789,
  • DIN IEC/TR 63158, DIN IEC/TR 61547-1
  • LED power supply unit 220-240 V x 0/50-60 Hz
  • DC 176-264 V
  • DALI controllable
  • Number of DALI addresses: 1
  • A basic isolation exists between the power cable and the control line
  • BEGA Thermal Control®
  • Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
  • Safety class II
  • Protection class IP 65
  • Dust-tight and protection against water jets Impact strength IK10
  • Protection against mechanical impacts < 20 joule
  • Conformity mark
  • Weight: 4.6 kg
  • This product contains light sources of energy efficiency class(es) C

Safety

  • The installation and operation of this luminaire are subject to national safety regulations.
  • Installation and commissioning may only be carried out by a qualified electrician.
  • The manufacturer accepts no liability for damage caused by improper use or installation.
  • If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

  • The electronic components installed in the luminaire are protected against overvoltage under DIN EN 61547.
  • To achieve additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
  • You can find them on our website at www.bega.com.
  • The ideal protection of all electronic components installed in the luminaires is achieved by using bounce-free switching contacts such as an electronic relay (solid-state relay), e.g. BEGA 71320.

Lamp

  • Module connected wattage 35.3 W
  • Luminaire connected wattage 38.5 W
  • Rated temperature ta= 25 °C
  • Ambient temperature ta max= 35 °C

85 197K3

  • Module designation LED -0842/830
  • Color temperature 3000 K
  • Color rendering index CRI > 80
  • Module luminous flux 6675 lm
  • Luminaire luminous flux 3544 lm
  • Luminaire luminous efficiency 92,1 lm/W

Installation

  • Lead luminaire connecting cable into the pole and put on a luminaire.
  • Align the luminaire and fix it.
  • Fix lateral hexagon socket head screws M8 firmly.
  • Torque = 12Nm.
  • The electrical connection of the luminaire must be made with the appropriate protection class and safety class using suitable connection terminals (not included in the scope of delivery) on the luminaire power supply cable.
  • We recommend you use BEGA connection boxes for this purpose.
  • Note the correct configuration of the main supply cable. The phase is connected to the brown wire (L) and the neutral conductor to the blue wire (N).
  • The connection of the control cables is achieved through both leads marked with DALI. In case these leads are not used the luminaire will be operated at full light output.

Cleaning Maintenance

  • Clean the luminaire regularly with solvent-free cleansers from dirt and deposits.
  • Do not use high-pressure cleaners.

Please note:

  • Do not remove the desiccant bag from the luminaire housing.
  • It is needed to remove residual moisture.

Replacement of the LED module

  • The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
  • The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted.
  • The module can be replaced by qualified persons using standard tools.
  • Disconnect the electrical installation.
  • To open the luminaire undo the hexagon socket screws (wrench size 5 mm) in the luminaire top and lift off the luminaire top.
  • LED-Netzteil austauschen.
  • To replace the LED module, the device holder also must first be removed from the luminaire housing.
  • Replace the LED module, and insert and secure the device holder.
  • Inspect and, if necessary, replace the luminaire gaskets.
  • The defective synthetic diffuser must be replaced.
  • Put on the luminaire top and tighten the screws uniformly in a crosswise fashion.
  • Torque = 3.7Nm.

Accessories

  • For this luminaire, we recommend the following luminaire poles.
  • Tapered aluminum poles, lacquered with access door and C-clamp
  • 70 913 Pole with anch.section H 3500 mm
  • 70 914 Pole with anch.section H 4000 mm
  • 70 725 Pole with anch.section H 4500 mm
  • 70 915 Pole with anch.section H 5000 mm
  • 70 789 Pole with baseplate H 3500 mm
  • 70 791 Pole with baseplate H 4000 mm
  • 70 792 Pole with baseplate H 4500 mm
  • 70 794 Pole with baseplate H 5000 mm
  • Cylindrically stepped aluminum poles lacquered · with door and C rail
  • 70 901 Pole with anch.section H 4000 mm
  • 70 903 Pole with anch.section H 5000 mm
  • 70 900 Pole with baseplate H 4000 mm
  • 70 902 Pole with baseplate H 5000 mm
  • Please see the instructions for the use of the luminaire poles for suitable connection boxes

Spares

  • Synthetic cover 15 000 824
  • LED power supply unit DEV-0270/1050i
  • LED module 3000 K LED-0842/830
  • Reflector 76 002 129
  • Gasket top 83 001 575
  • BEGA Gantenbrink-Leuchten KG
  • Postfach 3160
  • 58689 Menden
  • info@bega.com
  • www.bega.com

Documents / Resources

| BEGA 85197K3 Pole top Luminaire [pdf] Instruction Manual
85197K3, LED-0842-830, 85197K3 Pole top Luminaire, 85197K3, Pole top Luminaire, Luminaire
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals