BEGA 51284.4K3 Modular Pendant Light Instruction Manual

: August 3, 2024
: BEGA

Table of Contents

BEGA 51284.4K3 Modular Pendant Light
Product Usage Instructions
FAQ
Demission
Instructions for use
Product Description
Safety
Installation
Cleaning Maintenance
Accessories
Documents / Resources

BEGA 51284.4K3 Modular Pendant Light

Specifications

Lamp Module connected wattage: 23.2 W
Luminaire connected wattage: 26.4 W
Color temperature: 3000 K
Colour rendering index (CRI): > 90
Module luminous flux: 3 600 lm
Luminaire luminous flux: 3305 lm
Luminaire luminous efficiency: 125.2 lm / W

Product Usage Instructions

Safety Information

The installation and operation of this luminaire must comply with national safety regulations. Only a qualified electrician should perform the installation and commissioning.
Ensure the operating device meets the requirements specified in EN 61347-2-13. The maximum idle voltage should be 60 V DC conforming to SELV or SELV equivalent.

Installation

LED components are sensitive; avoid direct contact with the light output opening during installation or relamping.
To operate the luminaire, you need to order one of the BEGA Installation components specified for this product. Refer to the instructions for the selected BEGA installation component.

Accessories

Depending on the type of installation desired, specific installation components are available for this BEGA system pendant luminaire. Separate instructions for accessories can be provided upon request.

FAQ

Q: Can I install the luminaire without using the recommended BEGA Installation components?

A: The manufacturer does not accept liability for damage caused by improper use or installation if the BEGA installation components are not used.

Demission

Instructions for use

Application

Pendant luminaire · Indoor luminaire for unshielded and uniform light, with synthetic cover, translucent white, and with metal housing. BEGA System pendant luminaire for use in combination with various modular BEGA installation components.

Product Description

Metal housing, finish color matt brass
Synthetic cover, translucent white
Cable pendant · Sheath cable white 2 x 0,5@ with 1 steel wire
The overall length of the luminaire is approx. 2000mm
Safety class III
Conformity mark
Weight: 1.7 kg
This product contains light sources of energy efficiency class(es) D
Luminaire without canopy, for connection to an additional required
BEGA Installation component (accessory)

Lamp

Module connected wattage 23.2 W
Luminaire connected wattage 26.4 W
Rated temperature ta= 25 °C
Ambient temperature ta max =45 °C

51 284.4K3

Module designation LED-1419/930
Color temperature 3000 K
Color rendering index CRI > 90
Module luminous flux 3600 lm
Luminaire luminous flux 3305 lm
Luminaire luminous efficiency 125,2 lm/W

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Please note:

The luminaire can only be operated with an operating device that fulfills the requirements according to EN 61347-2-13.
The maximum idle voltage of 60 V DC must conform to SELV or SELV equivalent.

Installation

LEDs are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
To operate this luminaire one of the following additional BEGA Installation components must be ordered – accessories.
Please refer to the instructions for the use of the BEGA installation component selected for luminaire installation

Please note:

The manufacturer accepts no liability for damage caused by improper use or installation if no BEGA installation component is used to install this BEGA system pendant luminaire.
Replacing the LED module
The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
It is also listed in the spare parts overview at the end of these instructions for use.
The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by a qualified person using commercially available tools.
Disconnect the system from the power supply.
Loosen the canopy/canopy cover and push it downward on the luminaire cable.
Remove the connecting wires of the luminaire cable inside the canopy and unhook the hanger of the pendant luminaire from the mounting plate / installation frame.
Unfasten the steel wire of the luminaire cable.
Remove the strain reliever from the luminaire hanger.
Loosen the knurled nut and remove the strain reliever via the luminaire cable.
Remove the canopy/canopy cover.
Undo the knob in the funnel-shaped upper part of the housing by turning anti-clockwise.
Remove the knob and upper part of the housing via the luminaire cable.
Detach the synthetic cover and remove it via the luminaire cable.
Loosen the outer 2 Torx screws (T 10) of the housing tube.
Remove the connecting wires of the LED module strip from the terminals and remove the housing tube complete with the LED module (module strip) via the luminaire cable.
Guide the replacement LED module (housing tube with module strip) over the luminaire cable.
Fasten the housing tube with the LED module strip onto the luminaire base using 2 Torx screws (T 10).
Connect the connecting wires of the module strip to the terminals.
Please follow the installation instructions for the new LED module.
Guide the synthetic cover over the luminaire cable onto the luminaire base.
A defective luminaire cover must be replaced.
Guide the funnel-shaped upper part of the housing and knob over the luminaire cable onto the synthetic cover and tighten the knob in a clockwise direction.
IMPORTANT: The luminaire cable must first be guided through the borehole on the underside of the canopy.
Install the strain reliever back onto the luminaire cable and clip the strain reliever into the luminaire hanger.
Refasten the steel wire of the luminaire cable.
Hook the hanger of the pendant luminaire in the mounting plate/installation frame and reconnect the wires of the luminaire cable in the canopy.
Attach the canopy/canopy cover to the ceiling.
Fine adjustment of the pendant luminaire
Undo the knob in the funnel-shaped upper part of the housing by turning it anti-clockwise to enable the fine adjustment of the pendant luminaire along its horizontal axis.
Hold the bottom edge of the pendant luminaire with one hand and simultaneously turn the synthetic cover along its vertical axis with the other hand until the luminaire body is aligned horizontally.
Tighten the knob in the funnel-shaped upper part of the housing by turning it in a clockwise direction.

Cleaning Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt.

Accessories

BEGA Installation components with
LED power supply unit.
Satin white finish.
Depending on the desired type of installation, the following suitable installation components are available for this BEGA system pendant luminaire:

For all level ceilings:

13 327 Surface-mounted canopy (Type A) DALI · 220-240 V · 700 mA DC
13 329 Surface-mounted canopy (Type AS) Smart controllable/dimmable · 220-240 V · 700 mA DC
Suitable for level ceilings and sloped ceilings with a pitch of 0 – 40°:
13 331 Surface-mounted canopy (Type B) DALI · 220-240 V · 700 mA DC
13 333 Recessed canopy (Type C) DALI · 220-240 V · 700 mA DC
13 335 Recessed canopy (Type CS) Smart controllable/dimmable · 220-240 V · 700 mA DC
For the accessories, separate instructions for use can be provided upon request.

Spares

LED module 3000 K LED-1419/930
Synthetic cover 75 005 972
BEGA Gantenbrink-Leuchten KG
Postfach 3160
58689 Menden
info@bega.com
www.bega.com

Documents / Resources

| BEGA 51284.4K3 Modular Pendant Light [pdf] Instruction Manual
51284.4K3 Modular Pendant Light, 51284.4K3, Modular Pendant Light, Pendant Light, Light
---|---