signify IS M_MED ModuLyte 4 Inch Downlighting Instruction Manual
- July 20, 2024
- signify
Table of Contents
signify IS M_MED ModuLyte 4 Inch Downlighting
Specifications
- Product Name: ModuLyte Downlighting
- Model: IS M_MED 442296472151
- Available Sizes: 4in, 6in, 8in
- Compliance: Class A digital service, FCC Part 15
- Compliance: CAN ICES-005 (A) / NMB-005 (A)
FAQ
- Q: Can I install the ModuLyte Downlighting fixture myself?
- A: No, the installation and servicing of this product must be performed by a qualified electrician or service personnel.
- Q: What should I do if I encounter harmful interference while operating the equipment in a residential area?
- A: If harmful interference occurs, you will be required to correct it at your own expense. Ensure the equipment is operated in accordance with the instruction manual.
- Q: How should I handle changing the lens on the downlighting fixture?
- A: Follow the provided steps in the user manual to safely change the lens. Ensure you peel off the protective film from the new lens before insertion.
CAUTION: THE INSTALLATION AND SERVICING OF THIS PRODUCT MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN OR SERVICE PERSONNEL
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital service, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, many cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
CAN ICES-005 (A) / NMB-005 (A)
Read and understand these instructions before installing luminaire (fixture)
This luminaire is intended for installation in accordance with the National
Electrical Code and local regulations. To assure full compliance with local
codes and regulations, check with your local electrical inspector before
installation.
WARNING: To prevent electrical shock, turn off electricity at fuse box before proceeding. Allow fixture to cool before handling.
Introduction
Retain these instructions for maintenance reference
ModuLyte accepts Light Engines:
• M4RDL, M6RDL & M8RDL
Warning: (RISK OF FIRE)
- Use only with ModuLyte LED light engines and reflector.
WARNING: Make sure that the power supply is disconnected before installation.
Parts
Installation Instructions
- Step 1: Rotate the media holder counterclockwise until it is no longer tightened and pull it off downwards (Figure 1).
- Note: For easy removal use the holder tips
- Step 2: To change the lens, push it carefully to remove it from the holder (Figure 2).
- Step 3: To install another lens, grab it and peel the colored protective film from the diffuser lens and place that side towards the media holder, then insert it (Figure 3).
- Note: Make sure that the lens is properly seated in the 4 clips (Figure 4).
- Step 4: Center the 3 openings of media holder with the 3 tabs of the luminaire and insert it (Figure 3 and 5).
- Step 5: Rotate the media holder clockwise until secure (Figure 6).
- Note: The hook needs to be running interference in the opening.
Contacts
Signify North America Corporation
- 400 Crossing BIvd, Suite 600 Bridgewater, NJ 08807
- Telephone: 800-555-0050
Signify Canada Ltd.
- 281 Hillmount Road, Markham, ON, Canada L6C 2S3
- Telephone: 800-668-9008
All trademarks are owned by Signify Holding or their respective owners.
© 2024 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.