Elna International 200-140-021 Bias Binder Foot Instructions
- September 27, 2024
- Elna International
Table of Contents
Elna International 200-140-021 Bias Binder Foot
Product Specifications
- Product Name : BIAS BINDER FOOT
- Model Number: Ref 200-140-021
- Compatibility: Fits most sewing machines with appropriate attachment
- Features: Equipped with a small funnel, suitable for zigzag, decorative, and straight stitches
Product Usage Instructions
Attaching the Binder Foot
- Ensure the Lockout key is pressed (if available) or turn off the power switch before attaching the foot.
- Refer to your sewing machine’s instruction manual for specific attachment guidance.
Sewing Process
- Cut the end of the binding tape diagonally and insert it into the funnel of the binder foot.
- Pull out the tape end and draw it towards the rear under the foot. You can use a needle or stiletto for assistance.
- Insert the fabric you wish to bind.
- Sew slowly, guiding the edge of the fabric with your middle finger on the fingerrest while correctly guiding the binding tape through the conical tape guide with your right hand.
BIAS BINDER FOOT Ref 200-140-021
The binder foot makes it easy to attach pre-folded bias binding tape or bias tape you have made yourself, onto any project. Equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle, the binder foot can be used with either zigzag or decorative stitches as well as straight stitches.
Caution
- Make sure to press the Lockout key when replacing the foot or attaching a binder.
- For models without the Lockout key, turn the power switch off when attaching and detaching the foot and binder.
- Please refer to your machine’s instruction manual for accessory attachment and removal information.
Machine Settings
- Stitch: Straight stitch (Center needle position
- Thread tension: 3 – 6
- Stitch length: 1 – 3
- Stitch width: 0
Please refer to your machine’s instruction manual for presser foot attachment and removal information.
To sew:
- Cut the end of the binding tape diagonally and insert it into the funnel. Pull out the tape end and draw it toward the rear under the foot.
- You may use a needle or stiletto to draw the tape through the funnel.
- Insert fabric. Sew slowly, guiding the edge of the cloth with your middle finger on the finger rest, and, while guiding the binding tape through the conical tape guide correctly with your right hand.
FAQs
- Q: Can this binder foot be used with all types of sewing machines?
- A: The BIAS BINDER FOOT (Ref 200-140-021) is designed to fit most sewing machines. However, it’s recommended to check compatibility with your specific machine model.
- Q: How do I clean and maintain the binder foot?
- A: To clean the binder foot, gently remove any lint or debris using a soft brush. Avoid using harsh chemicals or excessive force. Store the foot in a dry and dust-free environment when not inuse.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>