Sotipevs LB-002 Corner Floor Lamp User Manual
- June 12, 2024
- Sotipevs
Table of Contents
Sotipevs LB-002 Corner Floor Lamp
PRODUCT INFORMATION
- MODEL NAME: Sotipevs Corner Floor Lamp
- MODEL NO: LB-002
Product Installation
- Take the first section at the bottom.
- Install the section 1 (or A) of the lamp.
- Install the section 2 (or B) of lamp,
- Install the last section. ( There is a lid at the top. )
- Fix the bottom iron frame and install the screws.
- Plug in the power and start your experience.
(TO ersure staNe vdtage. it test to an adapter of 5V/QA or
Product Description
Attention : When using, please place this side facing up and point the remote control at the infrared
Remote Control
APP Control
-
Download the L ED LAMP AP P with your Imbile phones by scanning the talk QR code or seu-ch the LED LAMP APP in the iPhone Appstore or Google Play Store
-
2- After the APP is downloaded successfully you need to turn on B] the Bluetooth function on your phone first. then the APP; your APP will pair with the sü•ip light automatically so you can control it-
• Android phones need to the location function and allow
Unable to Connect Troubleshooting
- Check if the power ofthe light strip is normal-
- Check if your mobile Blætooth is turned on
- Check if there are other mobile phones The cor floor lamp onw supports connections to one mobile phone.
- Normal operations md can mtcon1Ect, please tlE APP and reopen
- Exit APP, rBtart nx»bik power on the corner floor Iamg reopen APP. then them will connect autom*icallyz
How to connect
- Open the application click on the button in the upper right cor, select DMX XX•, and wait for t.iE &vice to connect automatically
- After successfully connecting the list in the upper left corner shows the number of connected &vqces
APP Introduction
Mode Interface
On this page, you can from more than 200 built-in height mocks the speed
and the brightness as needed
Custom Interface
On this page, you can customize your own light modes
Music Interface
In voice control mode. The lights are automatically synthesized with the
music played outside 
Music Interface
In music control mode. the lights are automatically synchronized with music
played on.
Timer Settings
You can open the tie timer by clicking tie button in the upper right cort of any interface You cm use the lights to turn MD off according to your needs
Chip Settings
If you film that tie the blik light on the remote control please go into tie chip settings and select GRB
Technical Parameter
Included Components
- 4 x Lamp
- 1 x User Manual
- 1 x Accessory Pack
- 2 x Bottom iron frame
- 1 x Remote Control
If you encounter any problems in the process of using our product, you can contact us at the following email address. longtaitou0314@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>