Kampa SabreLink 30 Awning and Tent Lighting System Instruction Manual

Kampa SabreLink 30 Awning and Tent Lighting System

Please read these instructions carefully and follow all instructions, guide- lines, and warnings included in this product manual in order to ensure that you install, use, and maintain the product properly at all times. These instruc-tions MUST stay with this product. By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This product manual, including the instruc-tions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit kampaoutdoors.com.

Safety instructions

General safety
Electrocution hazard

• If this device’s power cable is damaged, the power cable must be replaced by the manufac-turer, a service agent or a similarly qualified person in order to prevent safety hazards.
• This device may only be repaired by qualified personnel. Improper repairs can lead to consid-erable hazards. Avoid the power cord, plug or other electrical parts to get in contact with water or any other liquid.

Health hazard

•  This device can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the device in a safe way and understand the hazards involved.
•  Children shall not play with the device.
•  Cleaning and user maintenance shall not be made by children without supervision.

Operating the device safely

•  Do not operate the device if it is visibly dam-aged.
•  Do not operate the device if any of the compo-nents have been subjected to moisture.
•  Only use accessories that are recommended by the manufacturer.
•  Do not modify or adapt any of the components in any way.

Fire hazard

•  When positioning the device, ensure the supply cord is not trapped or damaged.
•  Do not locate multiple portable socket-outlets or portable power supplies at the rear of the device.

Health hazard
If the flexible wiring connected to this light is within arms reach fix it to the wall to reduce the risk of strangulation.

Scope of delivery

Starter kit

1. Remote control
2. Remote receiver
3. LED light
4. Carabiner
5. 5 m AC cable with power adapter
6. Velcro strip
7. D5mC cable

Add-on kit

1. 3 m connection cable
2. lLEDight
3. Carabiner
4. Velcro strip

Intended use

The lighting system is suitable for:

•  Interior illumination within tents or awning tents
•  Indoor use only
• The lighting system is not suitable for:
•  Outdoor use

This product is only suitable for the intended pur-pose and application in accordance with these instructions. This manual provides information that is necessary for proper installation and/or operation of the product. Poor installation and/or improper operat-ing or maintenance will result in unsatisfactory per-formance and a possible failure. The manufacturer accepts no liability for any injury or damage to the product resulting from:

•  Incorrect assembly or connection, including excess voltage
•  Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
•  Alterations to the product without express per-mission from the manufacturer
•  Use for purposes other than those described in this manual

Kampa reserves the right to change product appearance and product specifications. The radio equipment of the device complies with the requirements of the directive 2014/53/EU. You can find the Declaration of Conformity of the device on documents.dometic.com.

Technical description

The lighting system is designed for operation with AC power or DC power. Up to three LED lights can be linked together using one power adapter. The light source of this light is not replaceable. When the light source reaches its end of life the whole light shall be replaced.

Control elements

1. On/off button
2. + and – buttons
3. Percentage buttons

Installing the device

Starter kit
Proceed as shown

Add-on kit

Proceed as shown

Using the device

Before first use

1.  Remove the plastic tab from the remote con-trol‘s battery.
2.  Pair the remote control to the remote receiver

Switching on and off

Proceed as shown

Dimming the light

•  To dim the light continuously, proceed as shown
•  To dim the light in percentage steps, proceed as shown .

Changing the battery of the remote control

Replace the battery with a battery of the same type (3 V CR2025,

Storing the device

Store the device in a clean, dry and dust-free space.

Cleaning and maintenance

WARNING! Electrocution hazard Unplug the lighting system from the power supply before cleaning and main-tenance.

NOTICE!

•  Never clean the lighting system under running water or in dish water.
•  Do not use sharp or hard objects, abra-sive cleaning agents or bleach during cleaning as these can damage the lighting system.

Occasionally clean the lighting system with a soft, damp cloth.

Troubleshooting

• Fault/Possible cause/Solution
• The remote control does not work./The plastic tab that isolates the battery has not been removed before first use./Remove the plastic tab.
• The battery of the remote control is empty./ Replace the battery with a battery of thesame type (see chapter “Changing the bat-tery of the remote control”
• The remote receiver is placed within a metal enclosure or another closed-off loca-tion and therefore the RF wireless signal is compromised./Place the remote receiver away from any metal enclosure or closed-off locations.
• The remote control is not paired to the remote receiver correctly./Pair the remote control to the remote receiver (see chapter “Before first use” on page 9).

Warranty
The statutory warranty period applies. If the product is defective, please contact the manufacturer’s branch in your country (see kampaoutdoors.com /store-locator) or your retailer. For repair and warranty processing, please include the following documents when you send in the device:

• A copy of the receipt with purchase date
• A reason for the claim or description of the fault

Disposal

Place the packaging material in the appropriate recycling waste bins, wherever possible. Consult a local recycling center or special- ist dealer for details about how to dispose of the product in accordance with the applicable disposal regulations.

Technical data

Further product information can be accessed via QR code on the energy label on the product or via eprel.ec.europa.eu.

| SabreLink30| SabreLink48
---|---|---
Connection voltage:| 220 – 240 V AC

12 V DC

Power consumption:| 12 W ± 10 %| 24 W ± 10 %
Dimensions (W x H x D):| 480 x 20 x 8 mm| 800 x 20 x 8 mm
Weight:| 0.86 kg| 0.9 kg
Conformity:|

| Remote control
---|---
Working voltage:| 12 – 24 V DC
Output current:| Peak 6 A
Mode:| RF wireless
Frequency:| 433.92 MHz
Distance:| > 30 m in open area
Conformity:|

References

• kampaOutdoors | Kampaoutdoors.com | Kampaoutdoors International
• kampaoutdoors.com/de
• Find a Dealer | Kampa
• Home
• kampaOutdoors | Kampaoutdoors.com | Kampaoutdoors International
• kampaOutdoors | Kampaoutdoors.com | Kampaoutdoors International

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>