BEGA 85240K4 Performance Floodlight With Minimal Diffuse Light Percentage Instruction Manual
- July 20, 2024
- BEGA
Table of Contents
BEGA 85240K4 Performance Floodlight With Minimal Diffuse Light Percentage
Product Information
Specifications:
- Lamp Module connected wattage: 25.2 W
- Luminaire connected wattage: 28 W
- Rated temperature: 25-35 °C
- Ambient temperature: max 35 °C
- Color temperature: 3000 K / 4000 K
- Colour rendering index (CRI) : > 90
- Module luminous flux: 2825 lm / 3070 lm
- Luminaire luminous flux: 1970 lm / 2141 lm
- Luminaire luminous efficiency: 70.4 lm/W / 76.5 lm/W
DIMENSION
Instructions for use
Application
Performance floodlight with G½ mounting bush. The floodlight can be bolted
together with any female thread G½ according to ISO 228 supplied by others or
to BEGA accessories. For a variety of interior and exterior lighting
applications. BEGA Ultradark Optics® offer maximum of illumination and eye
comfort due to a minimized diffuse light percentage and highly efficient glare
suppression.
- Product description
- Luminaire made of aluminium alloy, aluminium and stainless steel
- BEGA Unidure® coating technology
- Colour graphite or silver
- Matt safety glass
- Internal louvres and polymer lens
- BEGA Ultradark Optics®
- Louvres and interior surface of anti-glare ring with maximum light-absorbing ultra-black nano-coating
- Rotation range of floodlight 350°
- Swivel range -30°/+95°
- Mounting bracket with G½ threaded connection
- Thread length: 14 mm
- Connecting cable X05BQ-F 5 G 1 mm²
- Cable length 1 m
- BEGA Ultimate Driver®
- Complies with flicker requirements in inaccordance with IEEE 1789,
- DIN IEC/TR 63158, DIN IEC/TR 61547-1
- LED power supply unit
- 220-240 V 0/50-60 Hz
- DC 176-264 V
- DALI-controllable
- Number of DALI addresses: 1
- Basic insulation is provided between the mains and control cables
- BEGA Thermal Control®
- Temporary thermal regulation to protect temperature-sensitive components without
- switching off the luminaire
- Safety class I
- Protection class IP 65
- Dust-tight and protection against water jets Impact strength IK06
- Protection against mechanical impacts < 1 joule
- Conformity mark
- Wind catching area: 0.028 m²
- This product contains light sources of energy efficiency class(es) E, F
Safety Guidelines:
The installation and operation of this luminaire must comply with national
safety regulations. Only a qualified electrician should perform the
installation and commissioning. The manufacturer is not liable for damages
resulting from improper use or installation. For optimal protection of
electronic components in the luminaire, use bounce-free switching contacts
like an electronic relay (solid-state relay).
Lighting technology
Symmetrically focused wide beam light distribution with minimal diffuse light
percentage.
- Half beam angle 25°
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician. The manufacturer accepts no liability for damage
caused by improper use or installation. If subsequent modifications are made
to the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Overvoltage Protection:
The electronic components have overvoltage protection per DIN EN 61547.
Consider additional protection against transients by using separate
overvoltage protection components available on the manufacturer’s website. The
electronic components installed in the
luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve additional protection against e. g. transients, etc. we recommend
separate overvoltage protection components. You can find them on our website
at www.bega.com.
The ideal protection of all electronic components installed in the luminaires
is achieved by using bounce-free switching contacts such as an electronic
relay (solid-state relay), e.g. BEGA 71 320.
Please note:
Contact with the inner surface of the luminaire reflector should be avoided in
order to permanently protect the special stray lightminimising properties of
the nano-coating.
Installation
Screw the floodlight G½ threaded connection firmly into the on-site G½ female
thread or BEGA accessory. G½ threaded connection torque = 40 Nm. Secure the
screw connection from loosening on site (if provided with locking screw S, see
fig. A). Check the earth conductor connection between the G½ threaded
connection and the on-site G½ female thread.
Adjust floodlight:
Undo hexagon socket screw (wrench size 5 mm) and hexagon nut (wrench size 27
mm) and set the desired beam direction (see sketch B, C).
Torque:
- Hexagon socket screw = 7 Nm
- Hexagon nut = 35 Nm
Secure bolted connection Gß against loosening by tightening the hexagon socket screws (wrench size 2 mm).
The electrical connection must be carried out with matching protection class and safety class, strain-relieved, with suitable connection terminals (not included in the scope of delivery) at the luminaire power supply cable. Note correct configuration of the mains supply cable. The earth conductor is connected at the green-yellow ( ), the phase to the brown (L), and the neutral conductor to the blue (N) marked wire. The connection of the control cables is achieved by means of the both leads marked with DALI. In case these leads are not used the luminaire will be operated at full light output.
Lamp
- Module connected wattage 25.2 W
- Luminaire connected wattage 28 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 35 °C
85 240 K3
- Module designation LED-1254/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 2825 lm
- Luminaire luminous flux 1970 lm
- Luminaire luminous efficiency 70,4 lm / W
85 240 K4
- Module designation LED-1254/940
- Colour temperature 4000 K
- Colour rendering index CRI > 90
- Module luminous flux 3070 lm
- Luminaire luminous flux 2141 lm
- Luminaire luminous efficiency 76,5 lm / W
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.
Maintenance:
Regularly check the connecting cable for external damage. Only a qualified
electrician should replace the cable. Do not remove the desiccant bag from the
luminaire housing as it helps remove residual moisture. The connecting cable
must be checked for external damage and may only be replaced by a qualified
electrician.
Please note:
Do not remove the desiccant bag from the luminaire housing. It is needed to
remove residual moisture.
Replacing the LED module
The designation of the LED module is noted on a separate label in the
luminaire or on the underside of the specific LED module. The light colour and
light output of BEGA replacement modules correspond to those of the modules
originally fitted. The module can be replaced by a qualified person using
commercially available tools. Disconnect the system from the power supply.
Open the floodlight:
Loosen the locking pin (hexagon socket wrench SW 2.5) on the back of the
floodlight housing. Remove the trim ring along with the safety glass and
reflector by twisting it anti-clockwise.
Please note:
Contact with the inner surfaces of the louvres and luminaire reflector should
be avoided in order to permanently protect the special stray light-minimising
properties of the nano-coating. Grasp the louvres from the outside and lift
them out. Loosen the three mounting screws (Torx drive T20) and lift the lens
holder (with the loosely inserted lenses) upward horizontally out of the
housing. Replace LED module. Please follow the installation instructions for
the LED module. Install in reverse order. When installing the lens holder,
make sure that the LED connecting cable is not pinched. Inspect and, if
necessary, replace the luminaire gaskets. Defective glass must be replaced.
Place the trim ring with glass and reflector on the floodlight housing so that
the notches in the trim ring and luminaire housing sit on top of each other.
Twist on the trim ring clockwise as far as the stop. Screw in the locking pin.
Accessories:
Accessories such as shields are available for this product. Separate
instructions for their use can be provided upon request.
- 71 333 Shield
- 71 338 Cylindrical shield
- 70 214 Pole cap for pole ø 48 mm
- 70 248 Pole cap for pole ø 60 mm
- 70 245 Mounting box
- 70 252 General fastener
- 70 280 Tube clamp G½
- 70 283 Screw clamp
- 70 379 Cross beam G½
- 70 889 Tension belt
For the accessories a separate instructions for use can be provided upon request.
Spares
- Spare glass inside 14 001 631
- Trim ring graphite with glass 25 000 281
- Trim ring silver with glass 25 000 282
- LED power supply unit DEV-0270/1200i
- LED module 3000 K LED-1254/930
- LED module 4000 K LED-1254/940
- Gasket housing 83 001 579
- Gasket trim ring 83 002 306
BEGA Gantenbrink-Leuchten KG
Postfach 3160
58689 Menden
info@bega.com
www.bega.com
FAQ:
Q: Can I install the luminaire myself?
A: No, the installation and commissioning must be done by a qualified
electrician to ensure safety and proper functioning.
Q: What should I do if the connecting cable is damaged?
A: Contact a qualified electrician to inspect and replace the connecting
cable.
Q: Is it necessary to use overvoltage protection components?
A: While the luminaire has overvoltage protection, additional protection
against transients is recommended for enhanced safety.