BEGA 85137K3 Performance Floodlight Instruction Manual

BEGA 85137K3 Performance Floodlight

Product Information

Specifications

• Material: Aluminum alloy, aluminum, stainless steel
• Power Supply: LED power supply unit 220-240 V x 0/50-60 Hz DC 176-280 V
• Control: DALI-controllable, with 1 DALI address
• Insulation: Basic insulation provided between hands
• Safety: Safety class I, Protection class IP 65, Impact strength IK06
• Light Sources: Energy efficiency class E

Product Usage Instructions

Facility

1. Installation and commissioning should only be carried out by a qualified electrician.
2. Ensure the luminaire is mounted securely using the provided mounting box with 2 fixing holes.
3. Connect the earth conductor properly to ensure safety.

Operation

1. Ensure the power supply is within the specified range (220-240 V x 0/50-60 Hz DC 176-280 V).
2. Use the DALI control to adjust the lighting as needed.

Maintenance
Regularly check for any signs of damage or wear and tear. Contact a professional if repairs are needed.

FAQ

• Q: What should I do if the luminaire is not working?
  A: Check the power supply, and connections, and ensure proper installation. If issues persist, contact a qualified electrician for assistance.

• Q: Can I modify the luminaire myself?
  A: No, any modifications to the luminaire should be done by a professional to avoid damage or safety hazards.

Application

• Performance floodlight with mounting box.
• For a variety of interior and exterior lighting applications.

Product Description

• Luminaire made of aluminum alloy, aluminum, and stainless steel
• BEGA Unidure® coating technology
• Color graphite or silver
• Clear safety glass
• Silicone gasket
• The reflector surface is made of pure aluminum
• BEGA Hybrid Optics®
• The rotation range of floodlight is 350°
• Swivel range -35°/+90°
• Mounting box with 2 fixing holes ø 4.8 mm · 67 mm spacing 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm, max. 5G 1.5@
• Connecting terminal 2.5@ with plug connection
• Earth conductor connection
• BEGA Ultimate Driver®
• Compline with flicker requirements by IEEE 1789,
• DIN IEC/TR 63158, DIN IEC/TR 61547-1
• LED power supply unit 220-240 V x 0/50-60 Hz
• DC 176-280 V
• DALI-controllable
• Number of DALI addresses: 1
• Basic insulation is provided between the hands and control cables
• BEGA Thermal Control®
• Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
• Safety class I
• Protection class IP 65
• Dust-tight and protection against water jets
• Impact strength IK06
• Protection against mechanical impacts < 1 joule
• – Conformity mark
• Wind catching area: 0.017 m²
• Weight: 1.4 kg
• This product contains light sources of energy efficiency class(es) E

Lighting technology

• Symmetrical wide beam light distribution
• Half beam angle 45°
• For special lighting applications, an optical filter can be used to change the symmetrical light cone into a flat beam light distribution.

Lamp

• Module connected wattage 10.2 W
• Luminaire connected wattage 11.6 W
• Rated temperature ta = 25 °C
• Ambient temperature ta max = 50 °C

85 137 K3

• Module designation LED-1148/930
• Color temperature 3000 K
• Color rendering index CRI > 90
• Module luminous flux 1500 lm
• Luminaire luminous flux 1098 lm
• Luminaire luminous efficiency 94,7 lm/W

85 137 K4

• Module designation LED-1148/940
• Color temperature 4000 K
• Color rendering index CRI > 90
• Module luminous flux 1575 lm
• Luminaire luminous flux 1153 lm
• Luminaire luminous efficiency 99,4 lm/W

Safety

• The installation and operation of this luminaire are subject to national safety regulations.
• Installation and commissioning may only be carried out by a qualified electrician.
• The manufacturer accepts no liability for damage caused by improper use or installation.
• If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

• The electronic components installed in the luminaire are protected against overvoltage under DIN EN 61547.
• To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
• You can find them on our website at www.bega.com.
• The ideal protection of all electronic components installed in the luminaires is achieved by using bounce-free switching contacts such as an electronic relay (solid-state relay), e.g. BEGA 71 320.

Installation

• LEDs are high-quality electronic components!
• Please avoid touching the light output opening of the LED directly during installation or relamping.
• Undo the hexagon socket head screw (wrench size 3 mm) up to the stop and disassemble the mounting plate.
• Pass the power connecting cable through the cable entry in the mounting plate.
• Note the position of application of the mounting plate “arrow down”.
• Fix the mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
• Be sure to use the gasket rings supplied.
• Make an earth conductor connection.
• Push silicone sleeves over the lines and make an electrical connection to the terminal (plug connection).
• For digital control please use the 2-pole plug connector DA, DA.
• In case this connector is not used the luminaire will be operated at full light output.
• Push the plug into the coupler as far as it will go.
• Connect the floodlight unit’s green and yellow protective earth conductor to the terminal marked in the mounting plate.
• Make sure that the gasket is positioned correctly.
• Place the floodlight unit onto the mounting plate as displayed in the sketch, and align and screw together firmly.

Adjustment of beam direction:

• Undo the joint screw (hexagon socket head wrench size 5 mm) and set the desired beam direction.
• Tighten the joint screw.
• Torque = 7 Nm.

Dimension

Cleaning and maintenance

• Clean the fixture regularly with solvent-free cleaners from dirt and deposits.
• Do not use high-pressure cleaners.

Maintenance
The connecting cable between the mounting box and floodlight has to be inspected for obvious damages and has to be replaced by a qualified electrician only.

Please note:

• Do not remove the desiccant bag from the luminaire housing.
• It is needed to remove residual moisture.

Replacing the LED module

• The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
• The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools.
• Disconnect the system from the power supply.

Open the floodlight:

• Remove the trim ring along with the safety glass and reflector by twisting it anti-clockwise.
• Replace the LED module.
• Please follow the installation instructions for the LED module.
• Inspect and, if necessary, replace the luminaire gaskets.
• The defective glass must be replaced.
• Place the trim ring with glass and reflector on the floodlight housing so that the notches in the trim ring and luminaire housing sit on top of each other.
• Twist on the trim ring clockwise as far as the stop.

Accessories

• 71 289 Optical filter flat beam
• 71 331 Shield
• 71 336 Cylindrical shield

For the accessories, separate instructions for use can be provided upon request.

Spare Parts

• Trim ring graphite with glass 25 000 273
• Trim ring silver with glass 25 000 274
• LED power supply unit DEV-0515/300i
• LED module 3000 K LED-1148/930
• LED module 4000 K LED-1148/940
• Reflector 75 005 131
• Gasket housing 83 000 486
• Gasket mounting box 83 001 839
• Gasket trim ring 83 002 169

BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com .

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>