Westinghouse WSF6606XB Built In Dishwasher User Manual
- July 16, 2024
- Westinghouse
Table of Contents
- WSF6606XB Built In Dishwasher
- Specifications:
- Product Description:
- Technical Specifications:
- Product Usage Instructions:
- Frequently Asked Questions (FAQ):
- Q: What should I do if I find my dishwasher damaged or marked
- Q: Can I wash delicate items like crystal or wooden utensils in
- Q: How do I ensure optimal performance of the dishwasher?
WSF6606XB Built In Dishwasher
“`html
Specifications:
- Model: WSF6606XB
- Manufacturer: Not specified
- Warranty: Refer to the user manual for warranty details
Product Description:
The WSF6606XB is a dishwasher designed to efficiently clean and
sanitize your dishes.
Technical Specifications:
- Dimensions: Not provided
- Capacity: Not provided
- Power Consumption: Not provided
- Water Consumption: Not provided
Product Usage Instructions:
-
Installation: Follow the installation
instructions provided in the user manual. Ensure the dishwasher is
properly connected to water and power sources. -
Preparation: Scrape off excess food from
dishes before placing them in the dishwasher. Load dishes according
to the recommended arrangement in the user manual. -
Detergent: Add dishwasher detergent to the
designated compartment. Use the recommended amount based on the
level of soiling and water hardness in your area. -
Select Cycle: Choose the appropriate wash
cycle for your dishes. Options may include normal, heavy, quick, or
eco cycles. -
Start: Close the dishwasher door securely and
start the cycle. Monitor the progress if needed. -
Unload: Once the cycle is complete, carefully
unload the dishes, allowing them to air dry if desired.
Frequently Asked Questions (FAQ):
Q: What should I do if I find my dishwasher damaged or marked
upon delivery?
A: Report any damage or marks within 7 days to claim under the
manufacturer’s warranty. Contact customer service for
assistance.
Q: Can I wash delicate items like crystal or wooden utensils in
this dishwasher?
A: Refer to the user manual for a list of items not suitable for
dishwashing. Avoid washing delicate items unless specified as
dishwasher-safe.
Q: How do I ensure optimal performance of the dishwasher?
A: Regularly clean the filters, maintain proper detergent
levels, and follow loading instructions for efficient cleaning
results.
“`
User Manual
WSF6606XB
DO NOT RETURN THIS PRODUCT TO THE STORE. If you have questions or need
assistance, please call customer service. Contact details can be found on the
last page of user manual.
CONGRATULATIONS
CONTENTS
Congratulations and thank you for choosing our product. We are sure you will
find your new appliance a pleasure to use and a great asset to your cooking.
Before you use the appliance, we recommend you read through the whole user
manual which provides a description of the product and its functions. To make
the best use of your new appliance, it is important that the appliance is
installed correctly and that you read the safety instructions carefully to
avoid misuse and hazards. We recommend that you keep this instruction booklet
for future reference and pass it on to any future owners. This appliance
complies with the requirements of Australian Standard AS/NZ 60335.2.5.
Conditions of use
This appliance is intended to be used in household and similar applications
such as: · Staff kitchen areas in shops, offices and other
working environments · Farm houses · By clients in hotels, motels and other
residential
type environments · Bed and breakfast type environments.
Record model and serial number here: Model: …………………………………………………………………… Serial
number: ……………………………………………………….
TIPS AND INFORMATION
Important: Check for any damage or marks. If you find the dishwasher is
damaged or marked, you must report it within 7 days if you wish to claim for
damage/marks under the manufacturer’s warranty. This does not affect your
statutory rights.
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . .
. . 3 Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 3 Safety information . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 3 Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 4 Items not suitable for dishwashing . . . . . . . . . . . . . . . . . .
4
Description of your appliance . . . . . . . . . . . . . . . . . . . . . . . .
. . 5 Technical specifications . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 5 The Control Panel . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 6
Changing a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Cancelling a program . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installig The Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 8 Positioning the machine . . . . . . . . . . . . . . . . . . . . . . . . .
. 8 Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 8 Water inlet hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 8 Water drain hose . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 8 Water drain hose . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 9 Electrical Connection. . . . . . . . . . . . . . . . . . . . . . . . . .
. . 9 Filling with rinse aid and setting . . . . . . . . . . . . . . . . . . .
. 9 Preparing The Machine For Use . . . . . . . . . . . . . . . . . . . . . .
. . . 11 Prior to using the machine for the first time . . . . . . . . . . . .
. . . .11 Detergent usage . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . .11 Filling the detergent compartment . . . . . . . . . . . . .
. . . . . . . . .11 Combined detergent . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .11 When you STOP using combined detergents . . . . . . .
. . . . . . . 12 Filling with rinse aid and setting. . . . . . . . . . . . . .
. . . . . . . . . 12 Loading your dishwasher . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .13 Upper Basket . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 13 Alternative modular basket position . . . . . . . .
. . . . . . . . . 15 Program descriptions . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .16 Program items . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 16 Maintenance and Cleaning . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 17 Filters . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 17 Spray arms . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 17 Drain Pump . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 17 Failure codes and what to do in
case of failure . . . . . . . . . . . . . .18 Troubleshooting . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Warranty . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
IMPORTANT INFORMATION THAT MAY
IMPACT YOUR MANUFACTURER’S WARRANTY
Adherence to the directions for use in this manual is extremely important for
health and safety. Failure to strictly adhere to the requirements in this
manual may result in personal injury, property damage and affect your ability
to make a claim under the Westinghouse manufacturer’s warranty provided with
your product. Products must be used, installed and operated in accordance with
this manual. You may not be able to claim on the Westinghouse manufacturer’s
warranty in the event that your product fault is due to failure to adhere this
manual.
ENVIRONMENTAL TIPS
Information on disposal for users
· Most of the packaging materials are recyclable. Please dispose of those
materials through your local recycling depot or by placing them in appropriate
collection containers.
· If you wish to discard this product, please contact your local authorities
and ask for the correct method of disposal.
2
IMPORTANT SAFETY INSTRUCTIONS
These warnings have been provided in the interest of safety. You MUST read
them carefully before installing or using the appliance. Please read the user
manual carefully and store in a handy place for later reference. Pass the user
manual on to possible new owners of the appliance. If you need assistance,
contact your Customer Care Department. The manufacturer will not accept
liability, should these instructions or any other safety instructions
incorporated in this book be ignored.
WARNING
This symbol indicates information concerning your personal safety.
TIPS AND INFORMATION
This symbol indicates tips and information about use of the appliance.
ENVIRONMENTAL TIPS
This symbol indicates tips and information about economical and ecological use
of the appliance.
Recycling
· Certain components and the packaging of your machine have been produced from
recyclable materials.
· Plastic parts are marked with international abbreviations: (>PE< , >PS< ,
POM<, >PP<, ….)
· Cardboard parts have been produced from recycled paper and they should be disposed of into waste paper collection containers for recycling.
· These materials should not be disposed of into garbage bins. They should be delivered to recycling centres instead.
· Contact relevant centres in order to obtain information on methods and points of disposal.
Safety Information
When you take delivery of your machine · Check for any damage to your machine or to its packaging. Never
start a damaged machine, make sure to contact an authorised technician. · Unwrap the packaging materials as indicated and dispose of them in accordance with the rules.
The points to pay attention during machine installation
· Choose a suitable, safe and level location to install your machine.
· Carry out the installation and connection of your machine by following the instructions.
· This machine should be installed and repaired by an authorised technician only.
· Only original spare parts should be used with the machine. · Before commencing the dishwasher installation,
be sure that the machine is unplugged.
· Check whether the indoor electrical fuse system is connected according to
the regulations.
· Make sure that the electrical information on the rating plate is the same as
the power supply. If not, contact an electrician.
· Always use a correctly installed shockproof socket.
· Make sure not to cause damage to the mains plug and to the mains cable.
Should the mains cable need to be replaced, this must be carried out by our
· Authorised Service Centre.
· Connect the mains plug to the mains socket only at the end of the
installation. Make sure that there is access to the mains plug after the
installation.
· Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
· If the supply cord is damaged, it must be replaced by the manufacturer, its
Authorised Service Centre or similarly qualified persons in order to avoid a
hazard.
· Pay special attention and make sure that the machine does not crush the
power cord.
· Never use an extension cord or a multiple socket to make a connection. The
plug should be easily accessible after the machine has been installed.
· After installing the machine, run it unloaded for the first time.
In daily use
· Do not use water spray and steam to clean the appliance.
· Do not stand, sit or place a load on the open door of the dishwasher, it may
fall over.
· Only use detergents and rinse aids which are produced specifically for
dishwashers. Otherwise Electrolux does not take any responsibility for damage
that might occur to your machine.
WARNING
The water in the machine’s washing section is not drinking water, do not drink
it.
Due to danger of explosion, do not put into the machine’s washing section any
chemical agents such as solvents. · Check whether plastic items are heat-
resistant before washing
them in the machine.
· Do not put into your machine those items which are not suitable for
dishwashing. Also, do not overload basket.
· The machine door should not be opened while the machine is in operation, to
avoid the risk of hot water spraying out. A safety device ensures that the
machine stops if the door is opened.
IMPORTANT SAFETY INSTRUCTIONS
3
SAFETY INFORMATION AND RECOMMENDATIONS
WARNING
Do not leave your dishwasher’s door open, this may lead to accidents and
injury.
RISK OF INJURY OR PERMANENT DISABILITY
Place knives and other sharp ended objects in the cutlery basket in the point
down position.
· This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
For your children’s safety
· After removing the machine’s packaging, make sure that the packaging
material is out of reach of children.
· Do not allow children to play with or start the machine.
· Keep your children away from detergents and rinse aids.
· Keep children away from the machine while it is open because there may still
be residues of cleaning substances inside the machine.
· Be sure that your old machine does not pose any threat to children. Remove
the dishwasher door lock and power supply cord.
base chemicals;
· Plastic items that are not heat-resistant, copper or tin coated containers;
· Aluminium and silver objects (they may discolour, become dull);
· Certain delicate glass types, porcelains with ornamental printed patterns
(may fade even after the first wash); certain crystal items (may lose their
transparency over time), laminated cutlery that is not heat-resistant, lead
crystal glasses, cutting boards, items manufactured with synthetic fibre;
· Absorbent items such as sponges or kitchen rags are not suitable for
dishwashing.
WARNING
Some dishwasher detergents are strongly alkaline. They can be extremely
dangerous if swallowed. Avoid contact with the skin and eyes and keep children
away from the dishwasher when the door is open. Check that the detergent
compartment is empty after completion of wash cycle.
In case of malfunctioning
· Any malfunction in the machine should be repaired by qualified persons. Any
repair work performed by anyone other than the authorised service personnel
will cause your machine to be left outside the scope of warranty.
· Prior to any repair work on the machine, be sure to unplug the dishwasher
from the power supply. Do not pull by the cable when unplugging. Make sure to
turn off the water tap.
Recommendations
· For energy and water saving, remove coarse residues on your dishes before
placing the dishes into the machine. Start your machine after having fully
loaded it.
· Use the pre-wash program only whenever necessary.
· Place items such as bowls, glasses and pots into the machine face down.
Items not suitable for dishwashing:
· Cigarette ashes, candle leftovers, polish, paint, chemical substances, iron-
alloy materials;
· Forks, spoons and knives with wooden or bone, ivory or nacrecoated handles;
glued items, items soiled with abrasive, acidic or
4
SAFETY INFORMATION AND REOMMENDATIONS
DESCRIPTION OF YOUR APPLIANCE
10
1
2
11
9
3
8
4 7
12
6
5
1 Worktop 2 Upper basket with racks 3 Upper spray arm 4 Filters 5 Rating plate 6 Control panel
7 Detergent and rinse-aid dispenser 8 Lower spray arm 9 Lower basket 10 Cutlery tray 11 Turbo Drying unit 12 Ceiling spray rose
TECHNICAL SPECIFICATIONS
Capacity ………………………………………………………………….15 place settings Height
………………………………………………………………………………….850 mm Height (without worktop)
…………………………………………………….820* mm Width…………………………………………………………………………………….598 mm
Depth…………………………………………………………………………………….598 mm Net
weight………………………………………………………………………………47.5 kg Electricity
input………………………………………………………220-240 V, 50 Hz Total power
…………………………………………………………………………… 1900 W Heating power
………………………………………………………………………. 1800 W Pump
power………………………………………………………………………………100W Drain pump power
……………………………………………………………………..30 W Water supply pressure…………………… 0.03 MPa (0,3
bar) – 1 MPa (10 bar) Water supply temperature ……………………………………………………….. 5 –
60°C Current ………………………………………………………………………………………..10 A
· Electrolux reserves the right to amend design and technical specifications.
· Do not use this appliance with power and temperature specifications
different to those indicated.
· Do not change the specification of this appliance. with counterweight and
insulation removed
DESCRIPTION OF YOUR APPLIANCE 5
THE CONTROL PANEL
1. On/Off Button 2. Program Selection Button 2.1. Program Indicators 3. Delay
Button 3.1. Delay Indicator 4. Remaining Time Indicator 5. Start/Pause Button
6. Options Button 7. Select Button 8. Child Lock Indicator 9. Rinse Aid
Indicator 10. Tablet Indicator 11. Extra Hygiene Indicator 12. Half Load
Indicators 13. Energy Save Indicator 14. Extra Fast Indicator 15. Extra Silent
Indicator 16. Washing Step Indicators a- Washing Step Indicator b- Rinse Step
Indicator c- Drying Step Indicator d- End Step Indicator
1. On/Off Button Turn the machine on by pressing the On/Off button.
2. Program Selection Button Select a suitable program by pressing the Program
button. The selected prog-ram indicator (2.1) will be on. For the details of
the programs refer to section Program Table.
3. Delay Button You can delay the start time of the program-me for 1-2…24
hours by pressing the delay button (3) before the program starts. The delay
indicator (3.1) will be on. If you want to change the delay time,first press
the Start/Pause button and then the delay but-ton to select a new delay time.
To activate the new delay time, press the Start/Pause button. To cancel the
delay, you need to switch to 0 hour by using the delay when the machine is
paused.
4. Remaining Time Indicator
Program flow can be monitored via the Wash,Rinse, Dry, End indicators and
Remai ning Time Indicator.
5. Start/Pause Button Press the Start/Pause button to start the program. The
wash lamp turns on and the Remaining Time Indicator shows the program
duration. It also indicates the remaining time during the program flow. If you
open the door of your machine when the program is running the duration of the
program pauses,and related washing step indicator blinks.
6. Options Button Options can be selected by pressing the Options button
repeatedly. The chosen opti-on will be indicated by a blinking LED.
7. Select Button Select the option by pressing the Select button. The LED for
the chosen option will then remain lit.
8.Child Lock Indicator: Child lock is activated/deactivated by pressing select
button (7) for about 3 seconds. When it is activated, all leds blink and “CL”
is shown on Remaning Time Indicator (4) once. When it is deactivated, all
lamps and “CL” blink twice. Child Lock indicator illuminates while the Child
Lock is active.
9. Rinse Aid Indicator When the rinse aid level is low, the rinse aid lack
warning indicator turns on and you should fill the rinse aid chamber.
10. Tablet Indicator
Select the Tablet Detergent function when using a combined detergent that
contains salt, rinse aid or other extras. The Tablet Detergent Indicator will
remain on for as long as it is selected.
11. Extra Hygiene Indicator
Select the Extra Hygiene function to increase the wash temperature, for a
maximum hygiene washing operation. The Extra Hygiene Indicator will
illuminate.
12. Half Load Indicator
Select the Half Load function to choose which area of the dishwasher contains
dishes to be washed. You can select both baskets, the upper basket only, or
the lower basket only. Press the button until the indicator corresponding to
the basket containing the dishes to be washed illuminates. The Half Load
Indicator will illuminate while this function is in operation. Dishes placed
in other areas will not be washed.
13. Energy Save Indicator (Autodoor) Select the Energy Save option to enable
Autodoor opening at the end of the program, to increase drying efficiency.
This function also saves energy by operating at a lower temperature
14. Extra Fast Indicator Select the Extra Fast function to decrease the
duration of a program, providing more economical water usage. The Extra Fast
Indicator will illuminate.
15. Extra Silent Indicator
Select the Extra Silent function for a more sensitive and silent washing
operation. The Extra Silent Indicator will illuminate. This option reduces the
sound pressure level of the washing.
16. Washing Step Indicators
The display will show the indicator corres-ponding to the status of the
program in operation. While the Drying indicator is on, the machine will
remain silent with respect to the program you have selected for 15 to 100
minutes. Wash Rinse Dry End
NOTE: If you switch the machine to off position after selecting the delay time
and the program has started, the delayed time is cancelled.
NOTE: To save any program as favourite program, press program selection (2)
and delay (3) buttons at the same time. To select favourite program, press
program selection button (2) for 3 seconds.
6 CONTROL DESCRIPTIONS
THE CONTROL PANEL
Changing a program If you would like to change the program when the machine is
already running.
Press the Start/ Pause button.
After the program stops, select your desired program via the program selection
button.
Start newly selected program by pressing the Start/Pause button. The new
program will resume the course of the old program.
Cancelling a program If you would like to cancel a program when it is running.
Press the Start/Pause button for 3 seconds. During cancellation, the End light
blinks. The machine discharges the water inside it in about 30 seconds. When
the End light turns on, switch your machine off by pressing the On/Off button.
NOTE: Do not open the door before the program ends.
NOTE: At the end of washing program-me, you can leave the door of your machine
ajar to hasten the drying.
NOTE: If the door of machine is ope-ned or power is cut off during washing the
program will continue when the door is closed or the power is restored.
Buzzer Sound Control
To change the buzzer sound level, follow the below steps: 1. Open the door and
press Option (6) and Select (7) buttons at the same time for 3 seconds.
2. When sound setting is recognized, buzzer gives a long sound and machine
will display last set level, from “S0” to “S3″.
3. To decrease sound level press Select button (7). To increase sound level,
press Options button (6).
4. To save the selected sound level, turn off the machine.
”S0” level means all voices are off. Factory setting is “S3”.
Save Power Mode
To activate or deactivate save power mode, follow the below steps:
1. Open the door and press Program (2) and Option (6) buttons at the same
time for 3 seconds.
2. After 3 seconds, the machine will display last Setting, “IL1” or “IL0”.
3. When Save Power Mode is activated, “IL1” will be displayed. On this mode,
interior lights (if avaliable) will turn off 2 minutes after the door is
opened, and the machine will turn off 15 minutes after any intervention in
order to save energy.
4.When Save Power Mode is deactivated “IL0” will be displayed. If Save Power
Mode is deactive, interior lights will be on as long as the door is open, and
the machine will always be on unless it is turned off by user.
5. To save the selected setting, turn off the machine. In factory setting,
Save Power Mode is active.
Switching the Machine Off
Switch your machine off with On/Off button after the program has ended and the
End light turns on. Pull the plug out of the outlet. Turn of the water tap.
7 CONTROL DESCRIPTIONS
INSTALLING THE MACHINE
Positioning the machine
· When considering the location for the dishwasher, ensure that there is
adequate space to enable loading and unloading of the dishes
· Do not put your machine in any location where the ambient temperature can
fall below 5°C.
· Before positioning, take the machine out of its packaging by following the
warnings located on the package.
· Position the machine close to a water tap and drain. You need to postion
your machine, taking into consideration that its connections will not be
altered once they are made.
· Do not grip the machine by its door or panel in order to move it.
· Take care to leave a certain clearance from all sides of the machine so that
you can comfortably move it back and forth during cleaning.
· Make sure that the water inlet and outlet hoses do not get squeezed while
positioning the machine. Also, make sure that the machine does not stand on
the electrical cable. Adjust the machine’s feet so that it is level and
stable. Proper positioning of the machine ensures problem-free opening and
closing of its door.
· If the door of your machine does not close properly, check if the machine is
stable on the floor; if not, adjust the feet and ensure it is level and
stable.
Water connection
Ensure that the indoor plumbing is suitable for installing a dishwasher and
complies with AS/NZS 3500.1. Also, we recommend that you fit a filter at the
entrance of your place or apartment so as to avoid any damage to your machine
because of any contamination (sand, clay, rust etc) that might be occasionally
carried in through the main’s water supply or the indoor plumbing, and to
avoid problems of staining and formation of deposits after washing.
finished.
WARNING
NOTE: Aquastop inlet hose has components using 240V. Do not cut Aquastop inlet
hose. Do not let it get folded, twisted, kinked or crushed.
WARNING
NOTE: A water tempering valve is required if the water temperature is over
60°C.
CAUTION
Always use new hoses when you connect the appliance to the water mains. Old
hoses must not be used. The water inlet hose must be examined at an interval
of twelve months for deterioration and replaced if necessary.
In order to pass the safety valve through the kitchen cabinets, an opening of
at least 45mm x 90mm is needed.
Water inlet hose
Do not use the water inlet hose of your old machine, you must use the new
water inlet hose supplied with your machine. Before connecting the water inlet
hose to the water tap, ensure clean water is flowing from the tap before
making the connection. Connect the water inlet
hose directly to the water inlet tap. The pressure supplied by the tap should
be at a minimum of 0.03 MPa and at a maximum of 1 MPa. If the water pressure
is above 1 MPa, a pressure-relief valve should be installed.
WARNING
Only turn the locking nut to secure hose – do not turn the hose. · The first
time you use the appliance, make sure that there is no leakage. · The water
inlet hose has a safety valve and a sheath with an inner mains cable.
After the connections are made, the tap should be turned on fully and checked
for water tightness. For the safety of your machine, make sure to always turn
off the water inlet tap after each wash program is
30cm min.
Water drain hose If you connect the water drain hose to a trap spigot under
the sink, remove the plastic membrane. If you do not remove the entire
membrane, remaining food can cause a blockage in the drain hose spigot. Ensure
a hose clamp is used to secure the hose to the spigot.
Remove entire internal membrane
8 INSTALLING THE MACHINE
INSTALLING THE MACHINE
Water drain hose
Floor level of the dishwasher.
The water drain hose can be connected either directly to the water drain hole
or to the sink outlet spigot. Using a hose hook (if available), the water can
be drained directly into the sink by positioning the hose hook over the edge
of the sink.
This connection should be at a minimum of 50 cm and at a maximum of 110 cm
above the base
WARNING
Electrical Connection
The plug of your machine should be connected to an earthed outlet that
supplies suitable voltage and current. If there is no earthing installation,
have a competent electrician carry out an earthing installation. In case of
usage without earthing installed, our company will not be responsible for any
loss of usage that might occur.
The indoor fuse current value should be 10-16 A.
Your machine is designed for 220-240 V. The machine should not be plugged in
during installation.
Always use the molded plug supplied with your machine.
WARNING
Maximum drain hose length is 4m. Longer hose length will prevent correct
draining, and result in poor wash performance.
Running in low voltage will cause a decline in washing quality.
The machine’s electrical cable should be replaced by an authorised service or
an authorised electrician only. Failure to do so may lead to accidents.
For safety purposes, always make sure to disconnect the plug when a wash
program is finished.
In order not to cause an electric shock, do not unplug when your hands are wet.
When disconnecting your machine from the mains supply, always pull from the plug. Never pull the cord itself.
Fitting the machine undercounter
If you wish to fit your machine undercounter, check whether you have
sufficient space under your countertop and whether the wiring-plumbing is
suitable to do so.
To ensure the stability of the dishwasher for an underbench installation, if
the underbench dimension is greater than 820mm, any gap between the dishwasher
and the underside of the benchtop should be bridged with a packing piece. This
may be achieved by wedging a piece of timber between the dishwasher and the
benchtop as shown.
Timber
wedging
piece Bench top
Filler piece cut to suit installation
3mm gap
9 INSTALLING THE MACHINE
INSTALLING THE MACHINE
1 Adjust the machine feet according to the slope of the floor.
2 Fit your machine by pushing it undercounter without letting the hoses get
crushed or bent.
WARNING
Ensure the opening for the dishwasher is according to the following
dimensions.
850-870mm
570mm min. 600mm
5
4
10
INSTALLING THE MACHINE
PREPARING THE MACHINE FOR USE
Prior to using the machine for the first time · Check whether the electricity
and water supply specifications
match the values indicated by the installation instructions for the machine. ·
Remove all packaging materials inside the machine. · Fill the rinse aid
compartment.
Detergent usage Use a detergent specifically designed for use in domestic
dishwashers. You can find powder, gel, and tablet detergents in the market
that have been designed for household dishwashers. Detergent should be put
into the compartment prior to starting the machine. Keep your detergents in
cool, dry places out of reach of your children. Do not fill detergent into the
detergent compartment more than required; otherwise it may etch your glasses
as well as leaving undissolved detergent in the dishwasher. Should you need
more information concerning the detergent to use, contact detergent
manufacturers directly.
Filling the detergent compartment Push the latch to open the detergent
container as shown in the image.
The Detergent pod has level lines inside. It is possible to measure the right
detergent amount using these lines. The detergent pod can take a maximum of
40cm3 detergent. Open the dishwasher detergent pod and pour 25cm3 if your
dishes are heavily soiled or 15cm3 if they are less soiled. You may have to
add more detergent into your machine, depending on the degree of soil and the
water hardness in your area.
Combined detergent
Detergent manufacturers also produce combined detergents called “2 in 1”, “3
in 1” or “5 in 1” etc.
“2 in 1” detergents contain detergent or rinse aid. When using “2 in 1”
detergent make sure to check the specifications of the tablet.
Other tablet detergents contain detergent + rinse aid + various extra
functions/additives.
Generally, combined detergents produce acceptable results under certain usage
conditions only. These detergents contain rinse aid in preset amounts.
Points to consider when using these type of products:
· Always make sure to check the specifications of the product you will use or
whether or not it is a combined product.
· These products should be used according to the manufacturer’s instructions.
· Never put combined detergents into the interior section or the cutlery
basket.
· Combined detergents contain not only the detergent but also rinse-aid
replacement substances and additional components depending on the combination.
· We recommend you do not use combined detergents in short programs. Please
use powder detergents instead.
· If you encounter problems when using combined detergents, please contact the
detergent manufacturer.
· When you stop using combined detergents, make sure that rinse aid setting is
set to the correct level.
Recommended usage: If you want to obtain better results while using combined
detergents, add rinse aid into your machine and adjust the rinse aid setting
to the lowest position.
Solubility of the tablet detergents produced by different companies can vary
depending on the temperature and time. Therefore, it is not recommended to use
these detergents in short programs. It is more suitable to use powder
detergents and rinse aid in short programs.
WARNING
Should any problem occur which you have not encountered before, with the use
of these types of detergents, contact the detergent manufacturers directly.
If your dishes are from the previous day and there is dried food waste on them, or if you have fully loaded the dishwasher, pour 5cm3 detergent onto the base of the door and start your machine.
PREPARING THE MACHINE FOR USE
11
PREPARING THE MACHINE FOR USE
When you STOP using combined detergents · Fill the rinse aid compartments. ·
Select a suitable rinse aid setting.
Filling with rinse aid and setting To fill the rinse aid compartment, open the
rinse-aid compartment cap.
In order to set rinse aid level, follow below steps:
· Turn on the machine by pressing the On/Off button.
· Press the Program button for at least 3 seconds immediately after the
machine is turned on.
· Release the program button when “rA” is shown. Next, the last setting level
is displayed.
· Set the level by pushing the program button.
· Switch off the machine to save the setting.
The factory setting is “4”.
If the dishes are not drying properly or are spotted, increase the rinseaid
level. If blue stains form on your dishes, decrease the rinse-aid level.
Level 1 2 3 4 5
Brightener Dose
Rinse-aid not dispensed
1 dose is dispensed
2 doses are dispensed
3 doses are dispensed
4 doses are dispensed
Indicator
r1 is shown on the display.
r2 is shown on the display.
r3 is shown on the display.
r4 is shown on the display.
r5 is shown on the display.
Fill the compartment with rinse aid until MAX level and then close the cap. Be
careful not to overfill the rinse aid compartment and wipe up any spills.
RINSE-AID
TIPS AND INFORMATION
Only use rinse aid suitable for automatic dishwashers.
As rinse aid residues left as a result of overflowing will create extremely
high amounts of foam and reduce the washing performance, remove the excess
amount of rinse aid by wiping it with a cloth. Remove all excess rinse aid if
spilt while filling.
PREPARING THE MACHINE FOR USE
12
LOADING YOUR DISHWASHER
For best results, follow these loading guidelines. Loading the household
dishwasher up to the capacity indicated by the manufacturer will contribute to
energy and water savings. Manual pre-rinsing of tableware items leads to
increased water and energy consumption and is not recommended You can place
cups, glasses, stemware, small plates, bowls, etc. in upper basket. Do not
lean long glasses against one another or they cannot remain steady and may
receive damage. When placing long stem glasses and goblets, lean them against
the basket edge or rack and not against other items. Place all containers such
as cups, glasses and pots into the dishwasher with the opening facing
downwards otherwise water can collect on items. If there is cutlery basket in
machine, you are recommended to use the cutlery grid in order to obtain the
best result. Place all large (pots, pans, lids, plates, bowls etc.) and very
dirty items in the lower rack. Dishes and cutlery should not be placed above
each other.
WARNING: Take care not to obstruct the rotation of spray arms.
WARNING: Make sure after loading the dishes do not prevent opening the
detergent dispenser.
Recommendations
Remove any coarse residue on dishes before placing the dishes in the machine.
Start the machine with full load.
Do not overload the drawers or place dishes in the wrong basket.
WARNING: To avoid any possible injuries, place long-handle and sharp-pointed
knives with their sharp points facing down or horizontally on the baskets.
Height adjustment
The upper basket includes a mechanism which enables the height of the basket
to be adjusted up (1) or down (2) without having to remove the basket. Hold
the basket on both sides and pull it up or push it down, ensuring both sides
of the upper basket are in the same position.
2
Height Adjustable Rack (peg type) The foldable racks in the upper basket
enable the placement of large items such as pots and pans. Each section can be
folded separately. The foldable racks can be either raised up or folded down.
1
13 LOADING YOUR DISHWASHER
Upper Cutlery Basket The upper cutlery basket is designed for the placement of
large and small cutlery and utensils.
The basket is easily removed from the dishwasher, therefore allows ease of use
when removing your items, along with the basket, after washing.
The upper cutlery basket is composed of two pieces that can be separately
removed. Remove the left or right section of the cutlery basket in order to
obtain more space for items in the upper basket.
WARNING: Knives and other sharp objects must be placed horizontally in the cutlery basket.
LOADING YOUR DISHWASHER 14
LOADING YOUR DISHWASHER
Alternative modular basket position
Alternative basket loads Lower Basket
LOADING YOUR DISHWASHER
Top Basket
TIPS AND INFORMATION Examples of incorrect loading
LOADING YOUR DISHWASHER
15
PROGRAM DESCRIPTIONS
Program items
NAME OF PROGRAM FAST 30′
DELICATE
ECO*
DUAL WASH TIMESAVE 50′
SENSORWASH
TYPE OF FOOD SOILS
PROGRAM TIME (MINS)
Lightly soiled items and a quick wash, no drying.
Suitable for lightly soiled dishes and quick wash.
Standard program for normally soiled daily using dishes with reduced energy and water consumptions.
30
74
216
Suitable for both lightly soiled delicate glassware on upper rack and heavily soiled crockery on lower rack.
Suitable for normally soiled daily dishes with faster program.
113
50
Auto program for normally and heavily soiled dishes.
199-219
NOTE: PROGRAM DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF DISHES, TAP
WATER, AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS. · Only use
powder detergent in short programs.
· Short programs do not include a drying step.
· To assist drying, we recommend partially opening the door after the program
has finished.
Information for test laboratories For all the necessary information for
performance testing, send an email to dishwasher@standardtest.info In your
mail please provide the model number and PNC number that is on the rating
plate on the appliance door.
16 PROGRAM DESCRIPTIONS
MAINTENANCE AND CLEANING
Cleaning your dishwasher is important to maintain the machine’s service life
Oil and limescale may build up in your Dishwasher over time. If this occurs:
Fill the detergent compartment but do not load any dishes. Select a program
which runs at high temperature and run the Dishwasher empty. If this does not
clean your Dishwasher sufficiently, use a cleaning agent designed for use with
dishwashers. To extend the life of your dishwasher, clean the appliance
regularly on each month.
Wipe the door seals regularly with a damp cloth to remove any accumulated
residue or foreign objects.
Spray arms
Make sure that the spray holes are not clogged and that no food waste or
foreign object is stuck to the spray arms. If there is any clogging,remove the
spray arms and clean them under water. To remove the upper spray arm undo the
nut holding it in position by turning it clockwise and pulling it downwards.
Make sure that the nut is properly tightened when refitting the upper
spray arm.
Filters
Clean the filters and spray arms at least once a week. If any food waste
remains or foreign objects on the coarse and fine filters, remove them and
clean them thoroughly with water.
a) Micro Filter b) Coarse Filter
c) Metal Filter
1
2
b
a
3
4
c
To remove and clean the filter combination, turn it counter clockwise and
remove it by lifting it upwards (1).Pull the coarse filter out of the micro
filter (2).Then pull and remove the metal filter (3).Rinse the filter with
lots of water until it is free of residue. Reassemble the filters. Replace the
filter insert, and rotate it clockwise (4).
· Never use your dishwasher without a filter.
· Incorrect fitting of the filter will reduce the washing effectiveness.
· Clean filters are necessary for proper running of the machine.
Drain Pump Large food residues or foreign objects which were not captured by
the filters may block the waste water pump. The rinsing water will then be
above the filter.
Warning Risk of cuts! When cleaning the waste water pump, ensure that you do
not injure yourself on pieces of broken glass or pointed implements. In this
case: 1. irst always disconnect the appliance from the power supply. 2. Take
out baskets. 3. Remove the filters. 4. Scoop out water, use a sponge if
required. 5. Check the area and remove any foreign objects. 6. Install
filters. 7. Re-insert baskets.
MAINTENANCE AND CLEANING
17
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
TROUBLE CODE
POSSIBLE FAULT
WHAT TO DO
Make sure the water inlet tap is open and water is flowing.
FF
Water inlet system failure
Separate the inlet hose from the tap and clean the filter of the hose.
Contact for service if the error continues.
F5
Pressure system failure
Contact for service.
F3
Continuous water input
Close the tap and contact for service.
Water discharge hose and filters may be clogged.
F2
Inability to discharge water
Cancel the program.
If the error continues, contact for service.
F8
Heater error
Contact for service.
F1
Overflow
Unplug the machine and close the tap. Contact for service.
F7
Overheating
Contact for service.
F9
Diverter position error
Contact for service.v
F6
Faulty heater sensor
Contact for service.
HI
High voltage failure
Contact for service.
LO
Low voltage failure
Contact for service.
The installation and repairing procedures should always carried out by the
Authorised Service Agent in order to avoid possible risks. The manufacturer
shall not be held liable for damages that may arise from procedures carried
out by unauthorised persons. Repairs may be carried out by technicians only.
If a component has to be replaced, ensure that only original spare parts are
used.
Improper repairs or use of non-original spare parts may cause considerable
damage and put the user at considerable risk.
Contact information for your customer service can be found on the back of this
document.
Function-relevant genuine spare parts according to the corresponding Ecodesign
order can be obtained from Customer Service for a period of at least 10 years
from the date on which your appliance was placed on the market within the
European Economic Area.
18 FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
TROUBLESHOOTING
PROBLEM
SOLUTION
If one of program monitor lights is on and start/pause light is flashing
· Your machine’s door is open, shut the door.
If the program won’t start
· Check if the plug is connected. · Check your indoor fuses. · Be sure that
the water inlet tap is turned on. · Be sure that you have closed the machine
door. · Be sure that you switched off the machine by pressing the Power On/Off
button. · Be sure that the water inlet filter and the machine filters are not
clogged. · First time use: Check if the drain spigot’s membrane has been
removed or
spigot blocked. · Check if the delay start has been selected reset.
If detergent residues are left in the detergent · Detergent has been added when the detergent compartment was wet.
compartment
· A large dish in the lower basket has blocked the dispenser door.
If water is left inside the machine at the end of the program
· The water drain hose is clogged or twisted. · The filters are clogged. · The program is not finished yet.
If the machine stops during a wash operation · Power failure. · Water inlet failure. · Program can be on standby mode.
If shaking and hitting noises are heard during · Dishes placed incorrectly.
a wash operation
· Spray arm hitting the dishes.
If there are partial food wastes left on the dishes
· Dishes placed incorrectly into the machine, sprayed water did not reach related places. · Basket over loaded. · Dishes leaning against one another. · Very small amount of detergent added. · An unsuitable, rather weak wash program selected. · Spray arm clogged with food wastes. · Filters clogged. · Filters incorrectly fitted. · Water drain pump clogged.
If there are whitish stains on the dishes
· A very small amount of detergent is being used. · Rinse aid dosage setting at a very low level.
If the dishes won’t dry up
· A program without a dry operation selected. · Rinse aid dosage set too low. · Dishes unloaded too fast.
If there are rust stains on the dishes
· Stainless-steel quality of the dishes washed is insufficient. · Unhealthy mains grounding.
Call an authorised service centre if the problem still persists after the controls or in case of any malfunction not described above.
19 TROUBLESHOOTING
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: WESTINGHOUSE DISHWASHERS
This document sets out the terms and conditions of the product warranties for
Westinghouse Appliances. It is an important document. Please keep it with your
proof of purchase documents in a safe place for future reference should there
be a manufacturing defect in your Appliance. This warranty is in addition to
other rights you may have under the Australian Consumer Law.
1. In this warranty:
(a) ACL’ or
Australian Consumer Law’ means Schedule 2 to the Competition and
Consumer Act 2010;
(b) Appliance’ means any Electrolux product purchased by you and accompanied by this document; (c)
ASC’ means Electrolux’s authorised serviced centres;
(d) Westinghouse’ is the brand controlled by Electrolux Home Products Pty Ltd of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004 762 341 in respect of Appliances purchased in Australia and Electrolux (NZ) Limited (collectively “Electrolux”) of 3-5 Niall Burgess Road, Mount Wellington, in respect of Appliances purchased in New Zealand; (e)
Warranty Period’ means the period specified in clause 3 of this warranty;
(f) you’ means the purchaser of the Appliance not having purchased the Appliance for re-sale, and
your’ has a corresponding meaning.
2. Application: This warranty only applies to new Appliances, purchased and
used in Australia or New Zealand and is in addition to (and does not exclude,
restrict, or modify in any way) other rights and remedies under a law to which
the Appliances or services relate, including any nonexcludable statutory
guarantees in Australia and New Zealand.
3. Warranty Period: Subject to these terms and conditions, this warranty
continues for in Australia for a period of 24 months and in New Zealand for a
period of 24 months, following the date of original purchase of the Appliance.
4. Repair or replace warranty: During the Warranty Period, Electrolux or its
ASC will, at no extra charge if your Appliance is readily accessible for
service, without special equipment and subject to these terms and conditions,
repair or replace any parts which it considers to be defective. Electrolux
may, in its absolute discretion, choose whether the remedy offered for a valid
warranty claim is repair or replacement. Electrolux or its ASC may use
refurbished parts to repair your Appliance. You agree that any replaced
Appliances or parts become the property of Electrolux.
5. Travel and transportation costs: Subject to clause 7, Electrolux will bear
the reasonable cost of transportation, travel and delivery of the Appliance to
and from Electrolux or its ASC. Travel and transportation will be arranged by
Electrolux as part of any valid warranty claim.
6. Proof of purchase is required before you can make a claim under this
warranty.
7. Exclusions: You may not make a claim under this warranty unless the defect
claimed is due to faulty or defective parts or workmanship. This warranty does
not cover:
(a) light globes, batteries, filters or similar perishable parts;
(b) parts and Appliances not supplied by Electrolux;
(c) cosmetic damage which does not affect the operation of the Appliance;
(d) damage to the Appliance caused by: (i) negligence or accident;
(ii) misuse or abuse, including failure to properly maintain or service;
(iii) improper, negligent or faulty servicing or repair works done by anyone
other than an Electrolux authorised repairer or ASC;
(iv) normal wear and tear;
(v) power surges, electrical storm damage or incorrect power supply;
(vi) incomplete or improper installation;
(vii) incorrect, improper or inappropriate operation;
(viii) insect or vermin infestation;
(ix) failure to comply with any additional instructions supplied with the
Appliance;
In addition, Electrolux is not liable under this warranty if:
(a) the Appliance has been, or Electrolux reasonably believes that the
Appliance has been, used for purposes other than those for which the Appliance
was intended, including where the Appliance has been used for any non-domestic
purpose;
(b) the Appliance is modified without authority from Electrolux in writing;
(c) the Appliance’s serial number or warranty seal has been removed
or defaced
8. How to claim under this warranty: To enquire about claiming under this
warranty, please follow these steps:
(a) carefully check the operating instructions, user manual and the terms of
this warranty;
(b) have the model and serial number of the Appliance available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.
9. Australia: For Appliances and services provided by Electrolux in
Australia: Electrolux goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the Appliance repaired or replaced if
the Appliance fails to be of acceptable quality and the failure does not
amount to a major failure. Acceptable quality’ and
major failure’ have the
same meaning as referred to in the ACL.
10. New Zealand: For Appliances and services provided by Electrolux in New
Zealand, the Appliances come with a guarantee by Electrolux pursuant to the
provisions of the Consumer Guarantees Act, the Sale of Goods Act and the Fair
Trading Act. Where the Appliance was purchased in New Zealand for commercial
purposes the Consumer Guarantee Act does not apply.
11. Confidentiality: You accept that if you make a warranty claim, Electrolux
and its agents including ASC may exchange information in relation to you to
enable Electrolux to meet its obligations under this warranty.
Important Notice Before calling for service, please ensure that the steps listed in clause 8 above have been followed.
AUSTRALIA
FOR SERVICE or to find the address of your nearest authorised service centre
in Australia
PLEASE CALL 13 13 49
For the cost of a local call
FOR SPARE PARTS or to find the address of your nearest
spare parts centre in Australia PLEASE CALL 13 13 50
For the cost of a local call
NEW ZEALAND
FOR SERVICE or to find the address of your nearest authorised service centre
in New Zealand
PLEASE CALL 0800 10 66 10
FOR SPARE PARTS or to find the address of your nearest
spare parts centre in New Zealand
PLEASE CALL 0800 10 66 20
20
WDish_Warr_Jul19
For more information on all Westinghouse appliances, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website:
AUSTRALIA service: spare parts: email: web:
NEW ZEALAND Customer Care: Spare Parts: Emai: Web:
13 13 49 13 13 50 customercare@electrolux.com.au westinghouse.com.au
0800 436 245 0800 106 620 customercare@electrolux.co.nz westinghouse.co.nz
Westinghouse are trademarks of Westinghouse Electric Corporation. Used under
license. All Rights Reserved.
© 2017 Electrolux Home Products Pty Ltd. ABN 51 004 762 341