Westinghouse 6131300 Outdoor Lighting Fixture Owner’s Manual

: October 30, 2023
: Westinghouse

Table of Contents

FIXTURE WARRANTY
Documents / Resources

W-778 112822
Owner’s Manual
LED Outdoor Lighting Fixture
Installation Instructions

FIXTURE WARRANTY

This Westinghouse lighting fixture is warranted against defects in material and workmanship for a period of five years from purchase date. This warranty is in lieu of all other warranties expressed or implied.
This warranty does not cover acts of nature such as lightening damage, or corrosion and discoloration of components, nor does it cover damages caused through abuse, improver installation, surges in electric current, or acts of third parties.
This warranty does not cover the costs of removing and re-installing the lighting fixture.
If this product fails for any reason covered by this warranty, please contact us at www.westinghouselighting.com/contactus.
ASSEMBLY INSTRUCTIONS FOR OUTDOOR LIGHTING FIXTURE
Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty and service. For questions and comments, please visit www.westinghouselighting.com/contact- us.
NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1)

WARNING: ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.
Read and follow instructions exactly as shown. If instructions are unclear, do not proceed.
Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damageelectrical wiring, gas lines, or water lines. If any of the fixture or iring
components are damaged, do not install fixture. Return topline of purchase.
For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provided on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult a qualified electrician before installing. Westinghouse 6131300 Outdoor
Lighting Fixture

NOTE: THIS FIXTURE IS SUITABLE FOR USE WITH DIMMABLE SWITCHES, SEE BELOW FOR LIST OF COMPATIBLE DIMMERS.

Brand	Model #	DIMMING Range
Lutron	DVCL-153P, MACL-153M, PD-6WCL, MRF2-6CL,	10-100%

TGCL-153PH-WH-C, SCL-153P, DVCL-253P, CTCL-153P
Leviton| DDL06-1 LZ, DSL06-1 LZ, 06674-002-10W, DSL06-001-1LZ,| 10-100%
IPL06-011-10Z, RNL06-001-10Z, TSLO6

Not recommended for use with motion sensors, light sensors, timers or any other external controls.

MOUNTING AND WIRING INSTRUCTIONS
NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.
CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

Turn off power at circuit box to avoid possible electric shock.
Thread mounting screws (A) into universal mounting plate (B) with mounting screws protruding
away from outlet box (C) (see figure 1).
Secure univeral mounting plate (B) to outlet box (C) with outlet box screws (D) (if applicable).
Identify color coding of fixture wires (see figure 2).
Connect the black wire from the fixture with the black wire (hot wire) from the outlet box (C) by wire connector (E), and wrap the wire connector (E) with electrical tape for a more secure connection.
Connect the white wire from the fixture with the white wire (neutral wire) from the outlet box (C) by wire connector (E), and wrap the wire connector (E) with electrical tape for a more secure connection.
Partially thread green grounding screw (F) into side hole (G) of cross bar (B) (see figure 1).
Wrap grounding wire from fixture around green grounding screw stem (F) leaving enough excess wire, then connect the excess grounding wire from the fixture with the grounding wire from outlet box (C) by wire connector (E) (if applicable), then wrap the wire connector (E) with electrical tape for a more secure connection.
Tighten grounding screw (F). Do not over tighten.
Tuck wires inside outlet box (C).

FIXTURE ASSEMBLY INSTRUCTIONS

Place back plate (H) over mounting screws (A).
Secure into place with cap nuts (I).
Raise decorative cage (J) up to fixture shade (K), secure with clips (L) on decorative cage (J).
Turn on power at circuit box

WARNING
Turn off electricity to the mounting site before beginning installation.
Mounting instructions must be followed exactly as shown for the fixture to be safely supported.
CLEANING AND CARE
To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can discolor the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.
ORDERING PARTS
Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.

Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A.
and Westinghouse are trademarks of Westinghouse Electric Corporation.
Used under license by Westinghouse Lighting.
All Rights Reserved.
www.westinghouselighting.com Made in China

Documents / Resources

| Westinghouse 6131300 Outdoor Lighting Fixture [pdf] Owner's Manual
6131300 Outdoor Lighting Fixture, 6131300, Outdoor Lighting Fixture, Lighting Fixture, Fixture
---|---