Eyedro ILM.NODE.1E. Inline Wireless Electricity Monitor User Guide
- October 27, 2023
- Eyedro
Table of Contents
Quick Start Guide
Inline Wireless (Mesh) Electricity Monitor
*(ILM.NODE.1E.)**
Verify Package Contents
| QTY| DESCRIP-
---|---|---
A| 1| Eyedro ILM.NODE.1E.* Module (15A model shown)
B| 1| Inlet Power Cord (NEMA 5-15P to IEC C13 shown)
C| 1| Outlet Power Cord (IEC C14 to NEMA 5-15R shown)
Record Serial Number
*ILM.NODE. SN:** –
Install Hardware
3.1 Attach the provided outlet adapter cord to the Inline monitor.
3.2 Connect the device or appliance to be monitored to the receptacle side of
the outlet adapter cord.
3.3 Attach the provided inlet power cord to the Inline monitor.
3.4 Plug the power cord into a wall receptacle and proceed to step 4 (Connect Device to the Internet).
Connect Device to the Internet
4.1 Inline Wireless Mesh Electricity Monitors connect to the internet through
Eyedro Wireless Gateway modules (sold separately).
Your inline monitor will automatically connect through a gateway module in
range.
Create a MyEyedro User Account
5.1 GO ONLINE TO: my.eyedro.com to create your online account (or login if you have an existing account).
5.2 Add the device to your user account by entering the serial numbers
recorded earlier.
5.3 ENJOY! Login to MyEyedro as often as you like to view your electricity
consumption.
5.4 For more details regarding the MyEyedro service, review the MyEyedro User
Guide located at eyedro.com/support
C opyright © 2022, Eyedro Green Solutions Inc.
Before Getting Started
This insert provides very high level installation instructions. Complete
installation instructions and video can be found in the Product Manual located
at eyedro.com/support
This product is intended for indoor use only.
All wireless mesh products require connection through an Eyedro Wireless Mesh
Gateway module (sold separately). Instructions assume your gateway is already
installed and configured correctly.
This product must only be used with approved inlet and outlet power cords and
must be properly rated for the application. Current and/or voltage ratings of
the device or appliance being monitored (connected to the outlet) must not
exceed the ratings of the Eyedro Inline Monitoring product.
Limited One Year Warranty
Eyedro Green Solutions Inc. warrants this product for a period of one year
from date of purchase for all defects in material and workmanship. Defective
parts may be repaired or replaced, at the discretion of the manufacturer,
during this period.
Important: This product contains no user servicable components. Do not
attempt to open the case of the unit or tamper with the internal components.
Doing so will void the product Warranty.
Full Warranty policy details are available at eyedro.com
Visit eyedro.com for any questions
or comments. We value your feedback.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>