H2205 True Wireless Earbuds User Manual
- June 2, 2024
- Earbuds
Table of Contents
H2205 True Wireless Earbuds
Product Diagram
Charging
Charging the Earbuds
The LED indicators on the earbuds will be in steady white when charging the
earbuds. The indicators turn off, when the earbuds are fully charged.
If the LED indicator of charging case flashes white during charging the earbuds, you need to charge the charging case.
Charging the Charging Case
Please connect a 5V/1A adapter Plug-in to charge with a USB-C charging
cable.
The LED indicators on the charging case will be in flashing white when
charging the case. The indicators turn off, when the charging case is fully
charged.
Specifications
Bluetooth version V5.3
Bluetooth Profile HFP HSP A2DP AVRVP
Bluetooth Codec SBC AAC
Transmission distance >10M
Horn φ8.0H4.8mm 2
Music playback time 6H
Earbuds battery 30mAh
Charging case battery 315mAh
Charging time 2H
Charging input 5V/1A
Product Weight Case 28.4g, Earbuds 3g2
Product Size 2446*58mm
Power On/Off
Power On
Open the cover of the charging box, the earbuds will power on
automatically.
Power Off
Put the earbuds into the charging box and close the cover, the earbuds will
power off automatically.
Notes
- To power on the earbuds that are not in the charging case, please press and hold the Touch-Sensitive Panel on the earbuds for 5 seconds.
- The earbuds will turn off after 5 seconds automatically without any device connected.
Earbuds Led Indicator
Power on White lights on for 1s
Pairing state The main earbud flashes white, the other earbud
lights off
Paired succeed Both earbuds are off
Charging process Steady white
Fully charged Light off
Pairing
- Take the earbuds out of the charging case, both earbuds are in flashing white, and pair each other automatically.
- When the two earbuds pair each other successfully, the main earbuds will be in flashing white and the other is off.
- Open the Bluetooth paring mode of your device, find ‘FreePods mini’ on your device Bluetooth list.
- Select ‘FreePods mini’ on your device Bluetooth list to connect (less than 3 feet).
Disconnection
When the device turn off Bluetooth, or it’s over the range to connect, the
earbuds will be waiting to connect. If there is no connection with 5 minutes,
the earbuds will power off.
Notes:
- The earbuds will automatically connect with the device they were last paired with when the earbuds are powered on.
- Each earbud could be used independently.
Control
Warning
- Keep away from extreme ambient temperatures below -20 degrees or above 50 degrees .
- Keep away from children and pets.
- Keep away from corrosive liquids to avoid damages to the product.
- Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
- If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.
This product has built-in lithium battery.Do not expose the product to strong sunlight, fire or throw it to the fire to avoid explosion.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
After Service
We provide 1 year warranty service. If you have other issues during your
use, feel free to contact us via vip@ourasj.com
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>