NEXX X.WED3 3 Keyo Carbon 22 06 Motocross Helmet Instruction Manual

NEXX X.WED3 3 Keyo Carbon 22 06 Motocross Helmet

Prouct Specifications

• Model: X.WED3
• Type: Dual Sport Enduro Helmet
• Features: X-LOCK Magnetic Side Bumper, X-HIDRO Top Intake Ventilations, Fast Release System (FRS)

FAQ

• Q: Is the Pinlock included with the helmet?
  • A: The Pinlock is not included with the X.WED3 helmet. It needs to be purchased separately and installed according to the instructions provided.
• Q: How do I adjust the size of the helmet?
  • A: The size adjustment is achieved using the internal sponges that allow for better fitting based on the shape of your head. Refer to the manual for detailed instructions on adjusting the size.

INTRODUCTION

At NEXX, we do not just engineer helmets, we tech emotions.
We believe in the heat of passion – parts of life getting new blood.
HELMETS FOR LIFE is our motto, beyond the protection, past excellence, that any motorcyclist regardless of age or style lives the moment they wear NEXX.

Please read this manual carefully before using the helmet and keep it in a safe place. In order proper use in safety, please observe the following instructions. The main function of the helmet and to protect the head in case of impact. This helmet is designed to partially absorb energy of an impact partially destroying some components of the helmet.

Whatever helmet it was heavily hit by an accident or that has received an equivalent shock must be replaced even if the damage is not obvious. To preserve the full effectiveness of this helmet, no modifications must not be brought to its structure or its components, without the approval of the homologation authority competent, likely to reduce the safety of the user. Only approved accessories preserve the safety of the helmet.

No component or device may be mounted or incorporated into the protective helmet, unless this component or device is designed so as not to cause injury and that, when it is mounted or incorporated into the protective helmet, the latter remains in compliance with the requirements of homologation. No accessories may be mounted on the helmet if some of the symbols, other than the symbols of attachment, indicated in the approval of the accessory are not indicated on the approval label of the helmet.

PRODUCT INFORMATION

X.WED 3
DUAL SPORT

DESCRIPTION OF COMPONENTS

1. Shell
2. Visor / Shield
3. Top Center Air Intake ventilation
4. Top side Air Intake ventilation
5. Peak
6. Chin Air Intake Ventilation
7. Frontal Air Intake Ventilation
8. Spoiler
9. Sunvisor Button
10. X.COM 3 cover
11. FRS – Fast Release System Button
12. Visor Mechanism
13. Goggle Strap Holder

EXCLUSIVE CARBON VERSION

VENTILATION

AIRFLOW CIRCUIT

VENTILATION

AIRFLOW CIRCUIT

VENTILATION

AIRFLOW CIRCUIT

HOW TO ADJUST THE BLADE

1. SLIGHTLY LOOSE THE SCREW
2. CHOOSE ONE OF THE THREE POSITIONS AND MOVE THE PEAK
3. TIGHTEN THE SCREW TO THE CHOSEN POSITION

HOW TO PUT ON THE BLADE EXTENDER

1. REMOVE THE COVERS, BOTH SIDES
2. PLACE THE EXTENSOR AND SLIDE
   • PLACE THE EXTENSOR AND SLIDE
3. FIX THE EXTENSOR AT THE HOLDER HOLE BOTH SIDES

HOW TO ADJUST THE BLADE EXTENSION

1. EXTENSOR HOLDER WITH 3 POSITIONS
2. ADJUST THE PEAK TO YOUR FAVORITE POSITION

HOW TO REMOVE THE BLADE

1. UNSCREW THE PEAK HOLDERS
2. REMOVE THE SCREW
3. REMOVE THE SCREWS BOTH SIDES
4. REMOVE THE PEAK

HOW TO CHANGE THE HELMET FOR “STREET” MODE

1. REMOVE THE PEAK (SEE DETAILS PREVIOUS PAGE)
2. INSERT THE “STREET COVERS” IN THE HOLES

HOW TO CHANGE YOUR HELMET IN “OFF ROAD” MODE

1. REMOVE THE VISOR
2. ALIGN THE COVER PINS WITH THE VISOR
3. PRESS TO LOCK
4. PUSH DOWN TO THE FINAL POSITION

HOW TO REMOVE THE VISOR MECHANISM COVER

1. PUSH UP THE COVER UP
2. PUSH THE BUTTON – BOTH SIDES
3. REMOVE THE COVER

HOW TO CLEAN THE VISOR

To clean the visor without altering its characteristics, only use water AND SOAP (preferably distilled) and a soft cloth. If the helmet is very dirty (e.g. insects) you can add a little cleaning fluid water dishwasher. Remove the visor from the helmet before performing a deeper cleaning. Do not use never use objects to clean the helmet that CAN damage/scratch the visor. Always keep your helmet in a dry place protected from light, preferably in the bag provided by NEXX HELMETS.

REMOVING THE VISOR

1. OPEN THE VISOR ALL THE WAY UP
2. PUSH THE BUTTON – BOTH SIDES
3. REMOVE THE VISOR

HOW TO PUT ON THE VISOR

1. ALIGN THE VISOR PINS WITH THE MECHANISM HOLES
2. PRESS TO LOCK

HOW TO USE THE SUN VISOR

1. CLOSE
2. FULL CLOSE POSITION
3. OPEN
4. FULL OPEN POSITION

HOW TO REMOVE THE SUN VISOR

1. 1 OPEN THE SUNVISOR
2. PULL FROM BOTH SIDES
3. PULL FROM BOTH SIDES
4. REMOVE THE VISOR

HOW TO PUT ON THE SUN VISOR

1. INSERT BOTH SIDES
2. PULL UP
3. READY TO USE

PINLOCK

ERGO PADDING

• The helmet size adjustment system is achieved with internal sponges which allow greater filling based on the shape of the head;

• Not included

CAMERA INSTRUCTIONS

HOW TO PLACE THE SIDE SUPPORT OF THE CAMERA

HOW TO POSITION THE ACTION CAMERA CHIN GUARD SUPPORT

1. PUSH THE BUTTONS AND REMOVE THE COVER
2. CHOOSE THE POSITION
3. INSERT THE ADAPTERS AND FIX WITH THE SCREW

HOW TO POSITION THE TOP ACTION CAMERA SUPPORT

1. UNSCREW TOP PEAK HOLDER
2. PLACE SUPPORT ON TOP OF THE PEAK
3. SCREW TOP PEAK HOLDER WTH THE BIGGER SCREW
4. CAN ALSO BE USED WITHOUT THE PEAK

COATING SPECIFICATIONS

The lining of this helmet has the following characteristics:

• Removable (only some models),
• Anti-allergic
• Anti-perspirant.

This can be removed and washable as shown in the diagram (some models only).
If for any reason this lining is damaged, it can be easily replaced (only some models).

REMOVABLE COVERING PARTS

FAST RELEASE SYSTEM

FRS – FAST RELEASE SYSTEM

REMOVE EAR BUDS FOR CLEANING

1. PULL THE LEVER
2. SLIDE THE RED BUTTON PULL THE LINNER EARPAD
   • (REPEAT THE PROCESS THE OTHER SIDE)

REMOVE EARBUDS IN CASE OF EMERGENCY

1. PULL THE LEVER
2. SLIDE THE RED BUTTON
3. OPEN THE CHIN STRAP
4. PULL THE EMERGENCY STRAP (BOTH SIDES)
5. REMOVE THE EARPAD (BOTH SIDES)
6. REMOVE THE HELMET SAFELY

REMOVING THE COVERING

1. PULL THE EARPADS BOTH SIDES USING FRS SYSTEM (SEE PREVIOUS PAGE)
2. PULL THE BACK SIDE OF THE LINNER
3. RELEASE THE SPRINGS
4. PULL THE FRONTAL PART OF THE LINNER

HOW TO PUT ON THE COVERING

1. INSERT THE FRONT OF THE LINNER
2. TIGHTEN THE SPRINGS
3. INSERT ON THE BACK
4. MAKE THE STRAP PASS THROUGH THE EARPADS
5. SLIDE THE RED BUTTON TO LOOSE THE EARPADS
6. INSERT
7. INSERT
8. PRESS AND SLIDE FRS BUTTON UNTIL CLOSE POSITION
9. PRESS THE PIN
10. PRESS THE PIN
11. PRESS THE PIN
12. MAKE SURE THE BUTTON IS SECURELY LOCKED AND THE EARPADS SECURELY ATTACHED

INSERTING EARPADS WITH FRS

HOW TO INSTALL THE HYDRATION HOSE

HOW TO CHANGE THE DUST FILTER WITH THE WINTER FILTER

1. REMOVE THE CHIN FILTER HOLDER AND THE DUST FILTER
2. INSERT THE WINTER FILTER AND W THE CHIN FILTER HOLDER

HOW TO REMOVE THE GLASSES STRAP SUPPORT

1. UNSCREW THE GOGGLE STRAP HOLDER
2. SCREW THE STRAP HOLDER COVER

ACCESSORIES

SIZE CHART

• Using a flexible tape measure, measure the circumference of your head.

The correct choice of helmet size is essential to ensure the safety of the user. Not never wear a helmet that is too tight or too loose for the size of your head. Before buy a helmet, it is important to try to check the size of the helmet: make sure the helmet fits perfectly to the head; there must be no space between the helmet and the head; When they are performed some rotational movements (left and right) with the helmet on the head (closed) this must not be agitated, it is important that the helmet is comfortable and envelops the entire head.

X.COM 3

• The X.WED3 model is prepared for the installation of the NEXX X-COM3 intercom system.

APPROVAL PLATE

MAINTENANCE AND CARE

• Light colors with a matte finish require special attention as they will naturally appear more exposed to dust, fumes, compounds or other types of dirt.
• THIS FACTOR IS NOT COVERED BY THE WARRANTY!
• Neon colors subjected to long exposure to UV rays will lose their intensity.
• THIS FACTOR IS NOT COVERED BY THE WARRANTY!
• We are not responsible for any harm, loss or damage arising from faulty fitment of any accessory.
• Do not expose the helmet to any type of solvent;
• The helmet must be handled with care. Dropping it could damage the paint and diminish the its protective characteristics.
• Keep the helmet in a safe place (do not hang it on the motorcycle mirror or other supports that could damage the coating). Do not carry the helmet on the motorcycle or on your arm while riding guide.
• Always use the helmet in the correct position, using the buckle to adjust the head;
• In order to maintain the correct functioning and handling of the visor, it is advisable to lubricate periodically coat the mechanisms and rubbers around the visor with silicone oil. The application is done with the help of a brush or pad. Do this in moderation and clean up the excess.
• These adequate care allow you to maintain the softness of the rubber profiles and increase the life of the visor fixing mechanisms is significantly improved.

The quality of our helmets is achieved with the most advanced European technology. The helmets are produced for protection and exclusive use of motorcyclists. The specifications of this helmet are subject to change without forewarning.

Contact

Nexxpro Fábrica de Capacetes S. A.

• Amoreira da Gândara industrial zone, lot nº11 3780-024 Amoreira da Gândara, Anadia – PORTUGAL
• nexx@nexxpro.com
• www.nexx-helmets.com

MADE IN EUROPE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>