NEXX Y.100 Helmets for Life Instruction Manual

Y.100
Y.100R

Y.100 Helmets for Life

At NEXX, we do not just engineer helmets, we tech emotions.
We believe in the heat of passion – parts of life getting new blood.
HELMETS FOR LIFE is our motto, beyond the protection, past excellence, that any motorcyclist regardless of age or style lives the moment they wear NEXX.
CONTENU TO

INSTRUCTION MANUAL

*Available in some models
** Not Included
Please read this manual very carefully before wearing your helmet and keep it in a safe place. For a correct use and for your safety, please pay attention to following instructions. The main function of the helmet is to protect your head in case of impact. This helmet is made to absorb some of the energy of a blow by partial destruction of its component parts and, even though damage may not be apparent, any helmet which has suffered an impact in an accident or received a similarly severe blow or other abuse should be replaced. To maintain the full efficiency of this helmet, there must be no alteration to the structure of the helmet or it´s component parts.

PARTS DESCRIPTION

1. Shell
2. Top Air Intake ventilation
3. Chin Air Intake Ventilation
4. Visor / Shield
5. Spoiler Y.100 Version
6. Visor Button
7. Shield/Visor Mechanism
8. X.COM 3 Base Cover
9. Spoiler Y.100R version

VENTILATIONS

HOW TO CLEAN THE VISOR

To clean the visor without affecting its characteristics should be used only soapy water (preferably distilled) and a soft cloth. If the helmet is deeply dirty (ex.Insect remains) can add a little liquid from the dish to water.
Remove the visor from the helmet before carrying a deeper cleaning. Never use objects to clean the helmet that may damage/scratch the visor. Always store the helmet in a dry place and protected from light, preferably in the bag provided by NEXX HELMETS.

HOW TO REMOVE THE VISOR

|
---|---
1.| 2. OPEN THE VISOR ALL THE WAY UP
|
3. PUSH THE BUTTON – BOTH SIDES| 4. PUSH THE VISOR – BOTH SIDES

HOW TO PLACE THE VISOR

| 1. ALIGN THE VISOR WITH THE MECHANISM
BOTH SIDES
|
2. PRESS TO LOCK| 3.

PINLOCK *

1. Remove the helmet shield
2. Bend the helmet shield and place the Pinlock® lens between the two pins provided in the helmet shield, fitting exactly into the dedicated recess.
3. The silicon seal on the Pinlock® lens must make full contact with the helmet shield in order to avoid any condensation forming between the helmet shield and the Pinlock® lens.

*Available in some models

HOW TO USE THE INNER SUN VISOR

|
---|---
1. CLOSE| 2. FULL CLOSE POSITION
|
3. OPEN| 4. FULL OPEN POSITION

HOW TO REMOVE DEINNER SUN VISOR

|
---|---
1. OPEN THE SUNVISOR| 2. PULL FROM BOTH SIDES
|
3. PULL DOWN| 4. AKE OFF THE VISOR

HOW TO PLACE THE INNER SUN VISOR

|
---|---
1. INSERT BOTH SIDES| 2. PULL UP

3. READY TO USE

HOW TO PLACE ACTION CAMERA SIDE SUPPORT

*Available in some models

ERGO PADDING *

LINING SPECIFICATIONS

| drip dry| | do not wring| | do not tumble dry
---|---|---|---|---|---
| do not iron| | hand wash| | do not bleach

REMOVABLE LINER PARTS

*Available in some models

HOW TO REMOVE THE INNER LINING

HOW TO PLACE THE INNER LINING

*Available in some models

BREATH DEFLECTOR *

*Available in some models

CHIN DEFLECTOR *

EMERGENCY SYSTEM

1. OPEN THE CHIN STRAP|
2. PULL THE EMERGENCY STRAP|

ACCESSORIES

SIZE CHART

|  XS| 53/54| 20,9/21,3
S| 55/56| 21,7/22
M| 57/58| 22,4/22,8
| L| 59/60| 23,2/23,6
XL| 61/62| 24/24,4
XXL| 63/64| 24,8/25,2

X.COM 3 *

The Y.100/Y.100R Mmodel is by Default Equipped to Accommodate the NEXX Helmets X-COM 3 Communications System.

HELMET CARE

• Light colors with matte finish require extra care as they are naturally more exposed to dust, fumes, compounds or other types of impurities.
  THIS IS NOT COVERED UNDER WARRANTY!
  Neon colors will fade when subjected to prolonged UV rays exposure.
  THIS IS NOT COVERED UNDER WARRANTY!
  We are not liable for any damage, loss or detriment resulting from faulty assembly of any accessory.

• Do not expose the helmet to any type of liquid solvent;

• The helmet should be handled with care. Leaving it drops can damage the painting as well as reduce their characteristics of protection.
  THIS NOT COVERED UNDER WARRANTY!

• Keep the helmet in a safe place (not hang on the mirror of motorcycle or other support than can damage the lining). Do not carry your helmet on the biker or in the arm while driving.

• Always use the helmet in the proper position, using the buckle to adjust to the head;

• In order to maintain trouble free operation of the visor, it is advisable to periodically lubricate the mechanisms and rubber parts around the visor with silicone oil. The application may be made with a brush or with the help of a cotton swab.
  Apply sparingly and remove the excess with a dry clean cloth. This proper care will maintain the softness of the rubber seal and will dramatically increase the durability of the visor fixing mechanism.

This hight quality helmet is made with the most advanced European technology. The helmets are technologically advanced for the motorcycle rider´s protections, which are made for motorcycle riding only.
This helmet specifications is subject to change without notice.
HELMETS FOR LIFE

Nexxpro Fábrica de Capacetes S. A.
Zona insdustrial de Amoreira da Gândara, lote nº11
3780-024 Amoreira da Gândara,
Anadia – PORTUGAL
nexx@nexxpro.com
www.nexx-helmets.com
MADE IN EUROPE
MARÇO 2023/R01

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>