SAMSUNG WM75A 75 Inch Flip 3 LED-Backlit LCD Display User Guide
- June 5, 2024
- Samsung
Table of Contents
SAMSUNG WM75A 75 Inch Flip 3 LED-Backlit LCD Display User Guide
- Recommended hours of use per day of this product is under 16 hours. If the product is used for longer than 16 hours a day, the warranty may be void.
- The colour and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance.
- Download the user manual from the website for further details. http://www.samsung.com/displaysolutions
Checking the Components
- Quick Setup Guide
- Warranty card (Not available in some locations)
- Regulatory guide
- Power cord
- USB cable x 2
- Touch Pen x 2
- OPS Case, Screw (M4 x L8) x 4, Screw (M3 x L6) x 4
- Wall Mount Adapter x 4
Contact the vendor where you purchased the product if any components are missing. Components may differ in different locations. Refer to the installation guide for the WMA stand or wall mount (available for optional purchase).
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Parts
- Power button & indicator
• Press and hold the button to turn off the product.
-
The power indicator is on when the product is turned on.
-
The power indicator is off when the product is turned off.
• In writing mode, shortly press the Power button to switch to the screen saver mode.- The pen is magnetic. Keep it by attaching to the marked location.
- Connect the OPS case that came with the package to the set, and insert the standard OPS module into the case. You can purchase the OPS module separately.
: Before inserting the OPS module, make sure to remove the power cable from the product to completely cut off the power supply.
-
OPS refers to the Intel Open Pluggable Specification.
-
OPS power supply: 19V/3.7A
Installing the OPS Case
- When the OPS case needs to be installed, be sure to install the OPS case first before the product.
- Before installing the OPS Case and OPS module, make sure to remove the power cable from the product to completely cut off the power supply.
- Use the two types of screws correctly.
- Remove the sticker on the connector before proceeding with step
Screen Elements
PEN MODE
-
View the screen of a mobile device or PC connected to the product, or import data such as images from a connected USB or network drive.
-
Share your creations in various ways.
-
Tap to select a mode. You can select from PEN MODE or BRUSH MODE.
-
Tap to open the Palette. You can select the colour and thickness of the pen and the highlighter.
-
Move or edit the created rolls for each page.
-
Create a layer to write or draw on over the screen which can also be saved the captured image.
-
Select and edit / capture / email / print the pen or brush content.
-
Undo or redo the last action.
• If any page editing actions such as page adding, deleting, and moving are found, is reset. -
Manage and change the rolls and settings.
-
Tap to search the internet.
-
Close the current roll and create a new roll.
-
See page lines.
-
Scroll through pages.
-
Scroll the black area to move the pages.
*BRUSH MODE
‐ Changes in the thickness depending on the area touching the screen apply immediately. (max. 5.0 cm)
‐ Brush use is recommended.
‐ BRUSH MODE supports single touch only
BRUSH MODE
IMPORT
You can view the screen of a mobile device or PC connected to the product, or
import data such as images from a connected USB or network drive.
• Touch IMPORT at the top of the screen to select the desired device.
- Displays the screen from a mobile device by using Smart View or Screen Mirroring function.
- Displays your PC screen imported using HDMI, DisplayPort, OPS connection or Wireless Display.
- You can display the screen shared from your PC, mobile, or tablet.
- Import videos, images, native FLIP files, or document files from a USB device.
- Connect the network to access the Internet from the product like accessing the Internet from a computer.
- Access to remote PC and your work resources with this function.
When you connect CISCO WebEx Room Kit Mini for the first time, select IMPORT → PC → HDMI to generate the icon. When you tap the icon, it is switched to CISCO WebEx mode.
The native FLIP format (.iwb) refers to files that are directly saved from the device and only supported by FLIP devices.
Supported video file formats: avi, mkv, asf, wmv, .mp4, mov, 3gp, vro, mpg, mpeg, ts, tp, trp, flv, vob, svi, m2ts, mts, .webm, .rmvb
Supportable image file formats: JPG, BMP, PNG, MPO
*Supported document file formats: DOC, PPT, PDF, XLS, XLSX
EXPORT
You can export your created rolls in various ways.
- Send your created rolls via email.
- Print your created rolls.
- Export your created rolls to a connected USB device.
- Export your created rolls to a registered and connected network drive.
- Send the roll to a mobile device.
- Share your screen with selected devices.
Troubleshooting Guide
Specifications
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
For detailed device specifications, visit the Samsung website.
Connecting the LAN Cable: Use Cat7(STP Type) cable for the connection.(10/100 Mbps) (Shielded Twist Pair)
For EXTERNAL (USB 2.0, USB 3.0), connect a USB terminal that can support under 100 W.
Wall Mount Kit Specifications
Contact SAMSUNG WORLD WIDE
Web site: http://www.samsung.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>