NEXX X.R3R Black Red Helmets Installation Guide

NEXX X.R3R Black Red Helmets

Product Specifications

• Model: X.R3R
• Brand: NEXX
• Main Function: Head protection in case of impact
• Features:
  • Shell
  • Top Air Intake Ventilation
  • Center Air Intake Ventilation
  • Shield/Visor
  • Chin Air Intake Ventilation
  • Double D-Ring Buckle with X-Lock
  • Top Air Exhaust
  • Spoiler
  • Spoiler Extension

Product Usage Instructions

Helmet Safety Instructions:

Please read the manual carefully before wearing the helmet. The helmet is designed to absorb impact energy by partial destruction of its parts. Replace the helmet if it has suffered an impact or severe blow. Use only homologated accessories to maintain safety.

Ventilation System:

Opening the vents may increase noise levels. Follow the markings to control the airflow through the top, center, and chin intake ventilation systems.

Visor Replacement:

1. Pressure the visor to release the pin on both sides.
2. Pull to release the visor.
3. Identify both visor pins and mechanism holes.
4. Insert the visor pins in the orientation and mechanism holes.
5. Repeat on the other side.

Visor Cleaning:

To clean the visor, use only soapy water and a soft cloth. For deep cleaning (e.g., insect remains), add a little liquid soap to distilled water.

Frequently Asked Questions

Q: How often should I replace my helmet?

A: Replace your helmet if it has suffered an impact, severe blow, or every 5 years for optimal safety.

Q: Can I use any accessories with the helmet?

A: Only use homologated accessories to ensure safety and maintain compliance with regulations.

Q: How do I adjust the ventilation system?

A: Follow the markings on the helmet to open or close the ventilation vents according to your preference.

At NEXX, we do not just engineer helmets, we tech emotions.
We believe in the heat of passion – parts of life getting new blood.
HELMETS FOR LIFE is our motto, beyond the protection, past excellence, that any motorcyclist regardless of age or style lives the moment they wear NEXX.

Please read this manual very carefully before wearing your helmet and keep it in a safe place. For a correct use and for your safety, please pay attention to following instructions. The main function of the helmet is to protect your head in case of impact. This helmet is made to absorb some of the energy of a blow by partial destruction of its component parts and, even though damage may not be apparent, any helmet which has suffered an impact in an accident or received a similarly severe blow or other abuse should be replaced. To maintain the full efficiency of this helmet, there must be no alteration to the structure of the helmet or it´s component parts, without the approval of the Type Approval Authority, that may decrease safety for the user. Only homologated accessories will maintain the helmet safety. No component or device may be fitted to or incorporated in the protective helmet unless it is designed in such a way that it will not cause injury and that, when it is fitted to or incorporated in the protective helmet, the helmet still complies with the requirements of the homologation. No accessory shall be mounted on the helmet if some of the symbols, other than location fitting symbols,marked in the accessory homologation is not marked in the helmet homologation label.

PARTS DESCRIPTION

1. Shell
2. Top Air Intake Ventilation
3. Center Air Intake Ventilation
4. Shield/Visor
5. Chin Air Intake Ventilation
6. Double D-Ring Buckle with X-Lock
7. Top Air Exhaust
8. Spoiler
9. Spoiler Extension

VENTILATIONS

Opening the vents on the helmet can cause an increase in noise levels.

HOW TO OPEN THE VISOR

HOW TO CLOSE THE VISOR

HOW TO REMOVE THE VISOR

HOW TO PLACE THE VISOR

HOW TO CLEAN THE VISOR

To clean the visor without affecting its characteristics should be used only soapy water (preferably distilled) and a soft cloth. If the helmets is deeply dirty (ex.Insect remains) can add a little liquid from the dish to water. Remove the visor from the helmet before carrying a deeper cleaning. Never use objects to clean the helmet that may damage/scratch the visor. Always store the helmet in a dry place and protected from light, preferably in the bag provided by NEXX HELMETS.

PINLOCK

1. Remove the helmet shield
2. Bend the helmet shield and place the Pinlock® lens between the two pins provided in the helmet shield, fitting exactly into the dedicated recess.
3. The silicon seal on the Pinlock® lens must make full contact with the helmet shield in order to avoid any condensation forming between the helmet shield and the Pinlock® lens.

HOW TO INSTALL TEAR OFF

HOW TO INSTALL THE SPOILER EXTENSION

HOW TO REMOVE SPOILER EXTENSION

LINING SPECIFICATIONS

The lining of the helmet has the following characteristics:

• Removable,
• Anti-allergy
• Anti-sweat
  This lining can be removed and washable, as shown in the picture. If for some reason this lining is damage it can be easily replaced.

HOW TO REMOVE THE BREATH DEFLECTOR

HOW TO REMOVE THE CHIN DEFLECTOR

HOW TO PLACE THE BREATH DEFLECTOR

HOW TO PLACE THE CHIN DEFLECTOR

HOW TO REMOVE THE NECKROLL

HOW TO PLACE THE NECKROLL

HOW TO REMOVE CHINSTRAP COVER

HOW TO PLACE CHINSTRAP COVER

HOW TO REMOVE THE INNER LINING

HOW TO PLACE THE INNER LINING

ACCESSORIES

SIZE CHART

Wrap the flexible measuring tape around your head.

EMERGENCY SYSTEM

Emergency System to remove CheckPads in case of accident, will allow that the helmet can be removed minimizing the risk of increasing/creating an injury to the user;
USE THIS SYSTEM ONLY IN CASE OF AN EMERGENCY!

HOW TO ADJUST ERGOFIT ON TOP

HOW TO ADJUST ERGOFIT IN THE BACK

ERGO PADDING

The helmet size adjustment system using interior foams that allow a better filling according to the shape of the head;

HOW TO INSTALL SIDE ERGO PADDING

HELMET CARE

• Light colors with matte finish require extra care as they are naturally more exposed to dust, fumes, compounds or other types of impurities.

• THIS IS NOT COVERED UNDER WARRANTY!

• Neon colors will fade when subjected to prolonged UV rays exposure.

• THIS IS NOT COVERED UNDER WARRANTY!

• We are not liable for any damage, loss or detriment resulting from faulty assembly of any accessory.

• Do not expose the helmet to any type of liquid solvent;

• The helmet should be handled with care. Leaving it drops can damage the painting as well as reduce their characteristics of protection.
  THIS NOT COVERED UNDER WARRANTY

• Keep the helmet in a safe place (not hang on the mirror of motorcycle or other support than can damage the lining). Do not carry your helmet on the biker or in the arm while driving.

• Always use the helmet in the proper position, using the buckle to adjust to the head;

• In order to maintain trouble free operation of the visor, it is advisable to periodically lubricate the mechanisms and rubber parts around the visor with silicone oil.
  The application may be made with a brush or with the help of a cotton swab.
  Apply sparingly and remove the excess with a dry clean cloth. This proper care will maintain the softness of the rubber seal and will dramatically increase the durability of the visor fixing mechanism.

• This hight quality helmet is made with the most advanced European technology. The helmets are technologically advanced for the motorcycle rider´s protections, which are made for motorcycle riding only. This helmet specifications is subject to change without notice.

Nexxpro Fábrica de Capacetes S. A.
Zona insdustrial de Amoreira da Gândara, lote nº11 3780-024 Amoreira da Gândara,
Anadia – PORTUGAL
nexx@nexxpro.com
www.nexx-helmets.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>