Zhongshan Nengdi Technology Co Ltd ND-FT15J 2.4G DC Fan Lamp Controller Instructions
- June 1, 2024
- Zhongshan Nengdi Technology Co Ltd
Table of Contents
Zhongshan Nengdi Technology Co Ltd ND-FT15J 2.4G DC Fan Lamp Controller
Product Introduction
This product uses 2.4G wiroless digital remote control technology, remote control one-to-one control, simple and convenient operation, strong anti- interference ability.
Technical Parameters
Model: 2.4G AC fanlight controller
Wall switch sequence: full light/white light/yellow light
Input voltage
AC100V-130V 50/60Hz
Output voltage:DC70-11 0V
LED output power: 25-36W
Motorrted power:<25W
ed:1-6 gears
hour/2 hours
Recewving method:RF2.4G
Remote control distance: 8-20 meters
Remote control battery:No.7 1.5VX2
Product Description
Remote control matching code
Tum on the power and Press and hold the light pairing key within 5 seconds of the light on, When you hear a beep or a light lashes, the code match is successful. If you need to match the code a second time. you need to wait 30 seconds before turning on the power and repeat the above operation.
CAUTION:
The electronic switch is not an isolated product and needs to be operated by
professional personnel during
Installation
The electronic switch is triggered by the remote control, and the wireless frequency of the remote control transmitter Is 2.4GHz.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, macaques harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>