NEXX X.R3R White Helmet Instruction Manual
- July 6, 2024
- NEXX
Table of Contents
NEXX X.R3R White Helmet
Specifications
- Removable and washable lining
- Anti-allergy and anti-sweat
- Emergency system included
- Multiple ventilation points
- Pinlock shield to prevent condensation
- Available in various sizes: XXS, XS, S, M, L, XL, XXL
Product Usage Instructions
Ventilations
Adjust the ventilations as needed to control airflow and comfort.
How to Open the Visor
Follow the designated mechanism to smoothly open the visor for clear
visibility.
How to Close the Visor
Gently close the visor to ensure proper sealing for protection.
How to Remove the Visor
Detach the visor carefully using the provided instructions to avoid any
damage.
How to Place the Visor
Securely attach the visor back in place following the correct alignment.
How to Clean the Visor
Use soapy water and a soft cloth to clean the visor without affecting its
quality. For deeper cleaning, remove the visor from the helmet.
Pinlock
Install the Pinlock shield correctly to prevent condensation formation.
INSTRUCTION MANUAL
Please read this manual very carefully before wearing your helmet and keep it in a safe place. For correct use and your safety, please pay attention to following instructions. The main function of the helmet is to protect your head in case of impact. This helmet is made to absorb some of the energy of a blow by partial destruction of its parts and, even though damage may not be apparent, any helmet that has suffered an impact in an accident or received a similarly severe blow or other abuse should be replaced. To maintain the full efficiency of this helmet, there must be no alteration to the structure of the helmet or its parts, without the approval of the Type Approval Authority, which may decrease safety for the user. Only homologated accessories will maintain the helmet’s safety. No component or device may be fitted to or incorporated in the protective helmet unless it is designed in such a way that it will not cause injury and that, when it is fitted to or incorporated in the protective helmet, the helmet still complies with the requirements of the homologation. No accessory shall be mounted on the helmet if some of the symbols, other than location fitting symbols, marked in the accessory homologation are not marked in the helmet homologation label.
PARTS DESCRIPTION
VENTILATIONS
HOW TO OPEN THE VISOR
HOW TO CLOSE THE VISOR
HOW TO REMOVE THE VISOR
HOW TO PLACE THE VISOR
HOW TO CLEAN THE VISOR
To clean the visor without affecting its characteristics should be used only soapy water (preferably distilled) and a soft cloth. If the helmet is deeply dirty (ex.Insect remains) add a little liquid from the dish to water. Remove the visor from the helmet before carrying a deeper cleaning. Never use objects toclean the helmet that may damage/scratch the visor. Always store the helmet in a dry place and protected from light, preferably in the bag provided by NEXX HELMETS.
PINLOCK
1 – Remove the helmet shield
2 – Bend the helmet shield and place the Pinlock® lens between the two pins
provided in the helmet shield, fitting exactly into the dedicated recess.
3 – The silicon seal on the Pinlock® lens must make full contact with the
helmet shield to avoid any condensation forming between the helmet shieldand
the Pinlock® lens.
HOW TO INSTALL TEAR OFF
HOW TO INSTALL THE SPOILER EXTENSION
HOW TO REMOVE SPOILER EXTENSION
LINING SPECIFICATIONS
The lining of the helmet has the following characteristics:
- Removable,
- Anti-allergy
- Anti-sweat
- This lining can be removed and washable, as shown in the picture.
- If for some reason this lining is damaged it can be easily replaced.
HOW TO REMOVE THE BREATH DEFLECTOR
HOW TO REMOVE THE CHIN DEFLECTOR
HOW TO PLACE THE BREATH DEFLECTOR
HOW TO PLACE THE CHIN DEFLECTOR
HOW TO REMOVE THE NECKROLL
HOW TO PLACE THE NECKROLL
HOW TO REMOVE CHINSTRAP COVER
HOW TO PLACE CHINSTRAP COVER
HOW TO REMOVE THE INNER LINING
HOW TO PLACE THE INNER LINING
ACCESSORIES
SIZE CHART
EMERGENCY SYSTEM
Emergency System to remove CheckPads in case of accident will allow the helmet can be removed minimizing the risk of increasing/creating an injury to the user; USE THIS SYSTEM ONLY IN CASE OF AN EMERGENCY!
HOW TO ADJUST PROFIT ON TOP
HOW TO ADJUST ERGOFIT IN THE BACK
ERGO PADDING
The helmet size adjustment system uses interior foams that allow a better
filling according to the shape of the head;
HOW TO INSTALL SIDE ERGO PADDING
HELMET CARE
Light colors with matte finish require extra care as they are naturally
more exposed to dust, fumes,
compounds or other types of impurities.
THIS IS NOT COVERED UNDER WARRANTY!
Neon colors will fade when subjected to prolonged UV ray exposure.
THIS IS NOT COVERED UNDER WARRANTY!
We are not liable for any damage, loss, or detriment resulting from faulty
assembly of any accessory. Do not expose the helmet to any type of liquid
solvent. The helmet should be handled with care. Leaving it dropped can
damage the painting as well as reduce its characteristics of protection.
THIS IS NOT COVERED UNDER WARRANTY!
Keep the helmet in a safe place (do not hang it on the mirror of the
motorcycle or other support that can damage the lining). Do not carry your
helmet on the biker or in the arm while driving. Always use the helmet in the
proper position, using the buckle to adjust to the head; To maintain ttrouble-
freeoperation of the visor, it is advisable to periodically lubricate the
mechanismsand rubber parts around the visor with silicone oil. The application
may be made with a brush or with the help of a cotton swab. Apply sparingly
and remove the excess with a dry clean cloth. This proper care will maintain
the softness of the rubber seal and will dramatically increase the durability
of the visor fixing mechanism
This high-quality helmet is made with the most advanced European technology.
The helmets are technologically advanced for the motorcycle rider´s
protection, which is made for motorcycle riding only. This helmet
specification is subject to change without notice.
- Buyers should be reminded to choose a qualified helmet that fits their head size
- Must be fastened when using
- If the helmet has had a major impact accident, it should be stopped or sent to the factory to determine whether it can continue to be used
- Pay attention to storage, do not scrub the helmet surface with corrosive solvents, and do not hit the helmet
- Period of use 5 years
nexx@nexxpro.com
www.nexx-helmets.com
Frequently Asked Questions
Q: How do I adjust the helmet for a better fit?
A: Refer to the Size Chart provided and adjust the inner linings
accordingly for a comfortable and secure fit.
Q: Can I machine wash the helmet lining?
A: The lining is removable and washable. Follow the instructions
provided in the manual for proper cleaning.