NEXX X.WED3 Plain Forest Matt Adventure Helmet Instruction Manual

X.WED3 Plain Forest Matt Adventure Helmet

“`html

Specifications

• Model: X.WED3
• Type: Dual Sport Helmet
• Features: Carbon Version Exclusives, Ventilation System, Fast
  Release System, Removable Liner Parts

Product Usage Instructions

X.WED 3 Dual Sport Helmet Parts Description

The X.WED 3 Dual Sport Helmet consists of various parts
including the Shell, Visor, Ventilation systems, Peak, Chin Air
Intake Ventilation, Spoiler, and more.

How to Adjust the Peak

1. Slightly loosen the screw.
2. Choose one of the three positions and move the peak.
3. Tighten the screw to the chosen position.

How to Place the Peak Extensor

1. Remove the covers on both sides.
2. Place the extensor and slide it into position.
3. Fix the extensor at the holder hole on both sides.

How to Remove the Peak

1. Unscrew the top shell holder.
2. Remove the screw and screws on both sides.
3. Remove the peak carefully.

FAQ – Frequently Asked Questions

Q: How do I clean the visor?

A: To clean the visor, gently wipe it with a soft cloth dampened
with mild soap and water. Avoid using harsh chemicals that may
damage the visor.

Q: Can I use the inner sun visor at night?

A: It is recommended not to use the inner sun visor at night as
it may reduce visibility in low-light conditions.

Q: How do I adjust the Fast Release System (FRS)?

A: To adjust the FRS, simply press the Fast Release System
button located on the helmet to release or secure the helmet
strap.

“`

EN CN
X.WED3

At NEXX, we do not just engineer helmets, we tech emotions.
We believe in the heat of passion – parts of life getting new blood.
HELMETS FOR LIFE is our motto, beyond the protection, past excellence, that any motorcyclist regardless of age or style lives the
moment they wear NEXX.
NEXX “”
NEXX

CONTENT

05 INSTRUCTION MANUAL
06 X.WED 3 DUAL SPORT

07 PARTS DESCRIPTION

08

CARBON VERSION EXCLUSIVES

09 VENTILATIONS

12 HOW TO ADJUST THE PEAK

13 HOW TO PLACE THE PEAK EXTENSOR

14 HOW TO ADJUST THE PEAK EXTENSOR

15 HOW TO REMOVE THE PEAK

16 HOW TO CHANGE HELMET TO STREET MODE

17 HOW TO CHANGE HELMET TO OFF ROAD MODE

18 HOW TO REMOVE THE VISOR MECHANISM COVER

19 HOW TO CLEAN THE VISOR
20 HOW TO REMOVE THE VISOR
21 HOW TO PLACE THE VISOR
22 HOW TO USE THE INNER SUN VISOR
23 HOW TO REMOVE DE INNER SUN VISOR
24 HOW TO PLACE THE INNER SUN VISOR
25 PINLOCK 26 ERGO-PADDING 27 HOW TO PLACE ACTION CAMERA SIDE SUPPORT 28 HOW TO PLACE THE CHIN ACTION CAMERA SUPPORT

29 HOW TO PLACE THE TOP ACTION CAMERA SUPPORT 30 LINING SPECIFICATIONS

3

CONTENT
31 REMOVABLE LINER PARTS
32 FAST RELEASE SYSTEM
35 HOW TO REMOVE THE INNER LINING
36 HOW TO PLACE THE INNER LINING
40 HOW TO PLACE THE HIDRATATION TUBE 41 HOW TO CHANGE DUST FILTER FOR WINTER FILTER

42 HOW TO REMOVE GOGLE STRAP HOLDER
43 ACCESSORIES
45 SIZE CHART
46 X.COM 3 * 50 HOMOLOGATION TAG

51 HELMET CARE

• Not included / 4

EN Please read this manual very carefully before wearing your helmet and keep it in a safe place. For a correct use and for your safety, please pay attention to following instructions. The main function of the helmet is to protect your head in case of impact. This helmet is made to absorb some of the energy of a blow by partial destruction of its component parts and, even though damage may not be apparent, any helmet which has suffered an impact in an accident or received a similarly severe blow or other abuse should be replaced. To maintain the full efficiency of this helmet, there must be no alteration to the structure of the helmet or it´s component parts.
CN
5

X.WED 3
DUAL SPORT
ENDURO
OFF-ROAD
STREET
6

PARTS DESCRIPTION

5 7 2

3

4

9

8
13 12 1

6

10

11

1 – Shell /

10 – X.COM 3 cover / X-COM 3

2 – Visor / Shield / / 3 – Top Center Air Intake ventilation

11- FRS – Fast Release System Button

4 – Top side Air Intake ventilation

12 – Visor Mechanism / / 13 – Gog gle Strap Holder /

5 – Peak /

6 – Chin Air Intake Ventilation /

7 – Frontal Air Intake Ventilation /

8 – Spoiler /

9 – Sun Visor Lever /

7

CARBON VERSION EXCLUSIVES

X-PRO

X-LOCK MAGNETIC

8

SIDE BUMPER

X-HIDRO
X-

VENTILATIONS

TOP INTAKE VENTILATIONS OPEN

AIRFLOW CIRCUIT

TOP INTAKE VENTILATIONS CLOSE

9

VENTILATIONS

FRONTAL INTAKE VENTILATIONS CLOSE
FRONTAL INTAKE VENTILATIONS OPEN

AIRFLOW CIRCUIT

LATERAL INTAKE VENTILATIONS CLOSE

LATERAL INTAKE VENTILATIONS OPEN

10

VENTILATIONS

AIRFLOW CIRCUIT

CHIN INTAKE VENTILATIONS OPEN
CHIN INTAKE VENTILATIONS CLOSE

11

HOW TO ADJUST THE PEAK

1 SLIGHTLY LOOSE THE SCREW

2 CHOOSE ONE OF THE THREE POSITIONS
AND MOVE THE PEAK

3 TIGHTEN THE SCREW TO THE CHOSEN POSITION
12

HOW TO PLACE THE PEAK EXTENSOR

1 REMOVE THE COVERS, BOTH SIDES

2 PLACE THE EXTENSOR AND SLIDE

2 PLACE THE EXTENSOR AND SLIDE
13

3 FIX THE EXTENSOR AT THE HOLDER HOLE
BOTH SIDES

HOW TO ADJUST THE PEAK EXTENSOR

1 EXTENSOR HOLDER WITH 3 POSITIONS 3

2 ADJUST THE PEAK TO YOUR FAVORITE
POSITION

14

HOW TO REMOVE THE PEAK

1 UNSCREW TOP SHELL HOLDER

2 REMOVE THE SCREW

3 REMOVE THE SCREWS BOTH SIDES

4 REMOVE THE PEAK

15

HOW TO CHANGE HELMET TO STREET MODE
1 REMOVE THE PEAK (SEE DETAILS PREVIOUS PAGE) STREET COVERS x3
2 INSERT THE “STREET COVERS” IN THE HOLES “”
16

HOW TO CHANGE HELMET TO OFF ROAD MODE

FRONT

VISOR MECHANISM COVERS
BACK

1 REMOVE THE VISOR (SEE PAGE 20) 20

2 ALIGN THE COVER PINS WITH THE VISOR
MECHANISM HOLES

3 PRESS TO LOCK
17

4 PUSH DOWN TO THE FINAL POSITION

HOW TO REMOVE THE VISOR MECHANISM COVER

1 PUSH UP THE COVER UP

2 PUSH THE BUTTON – BOTH SIDES

3 REMOVE THE COVER
18

HOW TO CLEAN THE VISOR

EN To clean the visor without affecting its characteristics should be used only soapy water (preferably distilled) and a soft cloth. If the helmet is deeply dirty (ex.Insect remains) can add a little liquid from the dish to water. Remove the visor from the helmet before carrying a deeper cleaning. Never use objects to clean the helmet that may damage/scratch the visor. Always store the helmet in a dry place and protected from light, preferably in the bag provided by NEXX HELMETS.
CN / NEXX HELMETS
19

HOW TO REMOVE THE VISOR

1 OPEN THE VISOR ALL THE WAY UP

2 PUSH THE BUTTON – BOTH SIDES
20

3 REMOVE THE VISOR

HOW TO PLACE THE VISOR

1 ALIGN THE VISOR PINS WITH THE
MECHANISM HOLES

2 PRESS TO LOCK
21

HOW TO USE THE INNER SUN VISOR

1 CLOSE

2 FULL CLOSE POSITION

3 OPEN
22

4 FULL OPEN POSITION

HOW TO REMOVE DE INNER SUN VISOR

1 OPEN THE SUNVISOR

2 PULL FROM BOTH SIDES

3 PULL FROM BOTH SIDES
23

4 REMOVE THE VISOR

HOW TO PLACE THE INNER SUN VISOR

1 INSERT BOTH SIDES

2 PULL UP
24

3 READY TO USE

PINLOCK *
4
4- Remove the film 25

ERGO PADDING *

• Not included 26

CAMERA SIDE SUPPORT

1

2

Use Tork screwdriver T10 or Hex screwdriver H2.5

3

4

5

6

27

HOW TO PLACE THE CHIN ACTION CAMERA SUPPORT

1 PUSH THE BUTTONS AND REMOVE THE
COVER

2 CHOOSE THE POSITION

3 INSERT THE ADAPTERS AND FIX WITH THE SCREW
28

HOW TO PLACE THE TOP ACTION CAMERA SUPPORT

1 UNSCREW TOP PEAK HOLDER

2 PLACE SUPPORT ON TOP OF THE PEAK

3 SCREW TOP PEAK HOLDER WTH THE
BIGGER SCREW

4 CAN ALSO BE USED WITHOUT THE PEAK

29

LINING SPECIFICATIONS

The lining of the helmet has the following characteristics:

EN

– Removable (only some models),

– Anti-allergy

– Anti-sweat

This lining can be removed and washable, as shown in the picture (only some models). If for some reason this lining is damage it can be easily replaced (only some models).

CN

–

–

–

30

REMOVABLE LINER PARTS

Ear Pad (R)

Deflector
Ear Pad (L)

Center Linner
31

FRS – FAST RELEASE SYSTEM
REMOVE THE EARPADS FOR CLEANING PURPOSES

1 PULL THE LEVER

2 SLIDE THE RED BUTTON
32

3 PULL THE LINNER EARPAD
(REPEAT THE PROCESS THE OTHER SIDE)
(

FRS – FAST RELEASE SYSTEM
REMOVE THE EARPADS IN CASE OF EMERGENCY

1 PULL THE LEVER

2 SLIDE THE RED BUTTON
33

3 OPEN THE CHIN STRAP

FRS – FAST RELEASE SYSTEM
REMOVE THE EARPADS IN CASE OF EMERGENCY

4 PULL THE EMERGENCY STRAP (BOTH SIDES)

5 REMOVE THE EARPAD (BOTH SIDES)

6 REMOVE THE HELMET SAFELY
34

HOW TO REMOVE THE INNER LINING

1 PULL THE EARPADS BOTH SIDES USING
FRS SYSTEM (SEE PREVIOUS PAGE)

2 PULL THE BACK SIDE OF THE LINNER

3 RELEASE THE SPRINGS
35

4 PULL THE FRONTAL PART OF THE LINNER

HOW TO PLACE THE INNER LINING

1 INSERT THE FRONT OF THE LINNER

2 TIGHTEN THE SPRINGS

3 INSERT ON THE BACK
36

4 MAKE THE STRAP PASS THROUGH THE
EARPADS

HOW TO PLACE THE INNER LINING

5 SLIDE THE RED BUTTON TO LOOSE THE
EARPADS (SEE FRS PAG.31)
(31″”

6 INSERT ( 37)

7 INSERT ( 37)
37

8 PRESS AND SLIDE FRS BUTTON UNTIL
CLOSE POSITION

HOW TO PLACE THE INNER LINING

9 PRESS THE PIN

10 PRESS THE PIN

11

PRESS THE PIN

12 MAKE SURE THE BUTTON IS SECURELY LOCKED AND THE EARPADS SECURELY ATTACHED

38

HOW TO PLACE THE INNER LINING

INSERT EARPADS WITH FRS

39

HOW TO PLACE THE HIDRATATION TUBE

1

2

3
*Available in some models 40

HOW TO CHANGE DUST FILTER FOR WINTER FILTER

1 REMOVE THE CHIN FILTER HOLDER AND THE DUST FILTER
2 INSERT THE WINTER FILTER AND THE CHIN FILTER HOLDER
41

HOW TO REMOVE GOGLE STRAP HOLDER

STRAP HOLDER COVER

1 UNSCREW THE GOGGLE STRAP HOLDER
2 SCREW THE STRAP HOLDER COVER
42

ACCESSORIES

HELMET BAG

ACCESSORIES BAG

VISOR MECHANISM COVERS X2

DEFLECTOR

PEAK EXTENSOR

*Available in some models / 43

EXTRA VISOR *

ACCESSORIES

CAMERA TOP SUPPORT

CAMERA CHIN SUPPORT

CAMERA SIDE SUPPORT

WINTER FILTER

STRAP HOLDER COVER

STREET COVERS X3
x3

CAMERA TOP
SUPPORT SCREW

PEAK EXTRA SCREW

HEX KEY

44

PINLOCK

SMALL SCREWS X3
x3

SIZE CHART

SHELL SIZE

HELMET SIZE

HEAD SIZE

CM

IN

XXS

51/52

20,1/20,5

XS

53/54

20,9/21,3

S

55/56

21,7/22

M

57/58

22,4/22,8

L

59/60

23,2/23,6

XL

61/62

XXL

63/64

XXXL

65/66

24/24,4 24,8/25,2 25,6/26

EN CN

45

The size selection of the helmet is crucial to ensure the safety of the user. Never should use a helmet that is

EN

too small or too large in relation to the size of the head. To purchase a helmet is important that you try it:

make sure the helmet fits perfectly to the head, there should be no gap between the helmet and the head;

make some movements of rotation (left and right ) with the helmet on the head(closed) this should not shake;

it´s important that the helmet is comfortable and involving the entire head.

CN

46

X.COM 3 *
The X.WED 3 model is by Default Equipped to Accommodate the NEXX Helmets X-COM 3 Communications System.
X.WED3

Mesh
*PRO version only
PRO

1

2

3

4

• Not included / 47

X.COM 3 *

RIGHT SIDE

• Not included / 48

Mesh *PRO version only PRO

X.COM 3 *
LEFT SIDE

ANTENNA

• Not included / 49

HOMOLOGATION TAG

HOMOLOGATION TAG INSERTED HERE
50

HELMET CARE SOIN À PRENDRE PFLEGE
EN – Light colors with matte finish require extra care as they are naturally more exposed to dust, fumes, compounds or other types of impurities. THIS IS NOT COVERED UNDER WARRANTY! Neon colors will fade when subjected to prolonged UV rays exposure. THIS IS NOT COVERED UNDER WARRANTY! We are not liable for any damage, loss or detriment resulting from faulty assembly of any accessory.
– Do not expose the helmet to any type of liquid solvent;
– The helmet should be handled with care. Leaving it drops can damage the painting as well as reduce their characteristics of protection. THIS NOT COVERED UNDER WARRANTY!
– Keep the helmet in a safe place (not hang on the mirror of motorcycle or other support than can damage the lining). Do not carry your helmet on the biker or in the arm while driving.
– Always use the helmet in the proper position, using the buckle to adjust to the head;
– In order to maintain trouble free operation of the visor, it is advisable to periodically lubricate the mechanisms and rubber parts around the visor with silicone oil. The application may be made with a brush or with the help of a cotton swab. Apply sparingly and remove the excess with a dry clean cloth. This proper care will maintain the softness of the rubber seal and will dramatically increase the durability of the visor fixing mechanism.
– Clean and lubricate mechanisms after use in extreme off road dust and dirt conditions.
CN –
–
–
–
–
–
–
51

This hight quality helmet is made with the most advanced European technology. The helmets are

EN

technologically advanced for the motorcycle rider´s protections, which are made for motorcycle riding only.

This helmet specifications is subject to change without notice.

CN

52

Nexxpro Fábrica de Capacetes S. A.
Zona insdustrial de Amoreira da Gândara, lote nº11 3780-024 Amoreira da Gândara, Anadia – PORTUGAL nexx@nexxpro.com www.nexx-helmets.com

MADE IN MARÇO 2023/R01

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>