Roinvou C7146 Android 13 CarPlay Stereo Instruction Manual
- June 1, 2024
- Roinvou
Table of Contents
Roinvou C7146 Android 13 CarPlay Stereo
Product Information
Specifications
- Product: Hyundai IX35 2010-2015 / C7146 Central Control
- Compatibility: Hyundai IX35 model years 2010-2015
- Model Number: C7146
Product Usage Instructions
- Wires
- Installation tools
- Use a pry bar to open the top frame of the radio and remove it. Then, pry open the air conditioning control panel.
- Use a screwdriver to unscrew the four screws on the top and
bottom of the radio, disconnect the attached cables, and remove the radio.
(If the wiring harness does not match, please contact customer service to request the correct wiring harness)
- Connect the car’s wiring to the new radio.
- Tighten the two screws on the bottom of the radio.
- Reinstall the air conditioning control panel back into its original position.
FAQ
- Q: What should I do if the wiring harness does not match during installation?
- A: If the wiring harness does not match, please contact customer service to request the correct wiring harness for your Hyundai IX35 model.
- Q: How can I ensure a successful installation?
- A: Before starting the replacement job, prepare tools such as a plastic pry tool and a screwdriver. Ensure that the car’s power is cut off during the installation process to prevent any electrical issues.
- Q: What should I do if I encounter problems during installation?
- A: If you encounter any issues during installation, contact customer service for assistance. You can reach out via the provided after-sales email address, and the team will respond within 24 hours to help resolve any problems you may face.
For Hyundai IX35 2010-2015 / C7146
- Central Control Disassembly and Operation Post-installation rendering
TOOLS REQUIRED FOR DISASSEMBLY
- Wires
- Installation tools
Disassembly
- Use a pry bar to open the top frame of the radio and remove it, then pry open the air conditioning control panel.
- Use a screwdriver to unscrew the four screws on the top and bottom of the radio, disconnect the attached cables, and remove the radio
Installation
(If the wiring harness does not match, please contact customer service to request the correct wiring harness)
- Connect the car’s wiring to the new radio, tighten the two screws on the bottom of the radio, and then reinstall the air conditioning control panel back into its original position.
COMPARATION
- Effect of Installation
GENTLE REMINDERS
Due to the complexity of the product structure, you may encounter some problems during installation. If you still have any questions about the installation after reading this manual, you can contact us and we will respond to you within 24 hours. Don’t worry; we will do our best to solve the problem for you until you are satisfied. After-sales email:cheyang728@gmail.com.
FCC STATEMENT
WARN FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation
PROPOSE
Before starting the replacement job, you should prepare tools such as a
plastic pry tool and a screwdriver, and make sure the car’s power is cut off
during the installation.