NEXX X.R3R Zero Pro Carbon Helmet User Manual
- June 1, 2024
- NEXX
Table of Contents
- NEXX X.R3R Zero Pro Carbon Helmet
- Product Usage Instructions
- PARTS DESCRIPTION
- VENTILATIONS
- HOW TO OPEN THE VISOR
- HOW TO REMOVE THE VISOR
- HOW TO CLEAN THE VISOR
- HOW TO INSTALL TEAR OFF
- LINING SPECIFICATIONS
- ACCESSORIES
- SIZE CHART
- EMERGENCY SYSTEM
- ERGO PADDING
- HELMET CARE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
NEXX X.R3R Zero Pro Carbon Helmet
Specifications:
- Model: X.R3R
- Brand: NEXX
- Helmet Type: Motorcycle Helmet
- Features: Pinlock, Ergo Padding, Ventilation System, Double D-Ring Buckle
Product Information:
At NEXX, we are dedicated to creating helmets that not only provide protection
but also evoke emotions. Our helmets are designed to inject new life and
passion into every ride, ensuring that motorcyclists of all ages and styles
can fully immerse themselves in the experience when wearing a NEXX helmet.
Product Usage Instructions
Ventilation System:
Opening the vents on the helmet can cause an increase in noise levels. Follow
the markings to adjust the various ventilation points for optimal airflow.
Cleaning the Visor:
To clean the visor without affecting its characteristics, use only soapy water
and a soft cloth. For deeper cleaning, remove the visor from the helmet. Never
use objects that may scratch the visor. Store the helmet in a dry place away
from light, preferably in the provided bag.
Pinlock Installation:
Install the Pinlock shield to prevent condensation forming between the shield
and the helmet. Ensure a proper fit to avoid any visibility issues while
riding.
Tear Off Installation:
Rotate tear off pins until screws face the back of the helmet.
Insert tear offs in both pins and rotate them until screws face the front
side. Ensure tear offs are tightly secured.
Spoiler Installation:
Identify the spoiler, screws, and Allen key. Remove the central screw and
loosen the side ones. Insert both lateral tabs and secure with the center
screw. Fasten both side screws to complete installation.
FAQ:
Q: How should I clean my NEXX helmet?
A: Use only soapy water and a soft cloth for regular cleaning.
For deeper cleaning, remove the visor and follow the instructions provided in
the manual.
Q: Can I adjust the ventilation system while riding?
A: It is recommended to adjust the ventilation system before riding to
avoid distractions and ensure optimal airflow.
At NEXX, we do not just engineer helmets, we tech emotions.
We believe in the heat of passion – parts of life getting new blood.
HELMETS FOR LIFE is our motto, beyond the protection, past excellence, that
any motorcyclist regardless of age or style lives the moment they wear NEXX.
Please read this manual very carefully before wearing your helmet and keep it in a safe place. For a correct use and for your safety, please pay attention to following instructions. The main function of the helmet is to protect your head in case of impact. This helmet is made to absorb some of the energy of a blow by partial destruction of its component parts and, even though damage may not be apparent, any helmet which has suffered an impact in an accident or received a similarly severe blow or other abuse should be replaced. To maintain the full efficiency of this helmet, there must be no alteration to the structure of the helmet or it´s component parts.
PARTS DESCRIPTION
- Shell
- Top Air Intake Ventilation
- Center Air Intake Ventilation
- Shield/Visor
- Chin Air Intake Ventilation
- Double D-Ring Buckle with X-Lock
- Top Air Exhaust
- Spoiler
- Spoiler Extension
VENTILATIONS
Opening the vents on the helmet can cause an increase in noise levels.
-
- 1 – CLOSE POSITION
- 2 – OPEN POSITION
- ** 1 – OPEN POSITION
- 2 – HALF OPEN POSITION
- 3 – CLOSE POSITION
HOW TO OPEN THE VISOR
HOW TO CLOSE THE VISOR
HOW TO REMOVE THE VISOR
HOW TO PLACE THE VISOR
HOW TO CLEAN THE VISOR
To clean the visor without affecting its characteristics should be used only soapy water (preferably distilled) and a soft cloth. If the helmets is deeply dirty (ex.Insect remains) can add a little liquid from the dish to water. Remove the visor from the helmet before carrying a deeper cleaning. Never use objects to clean the helmet that may damage/scratch the visor. Always store the helmet in a dry place and protected from light, preferably in the bag provided by NEXX HELMETS.
PINLOCK
- Remove the helmet shield
- Bend the helmet shield and place the Pinlock® lens between the two pins provided in the helmet shield, fitting exactly into the dedicated recess.
- The silicon seal on the Pinlock® lens must make full contact with the helmet shield in order to avoid any condensation forming between the helmet shield and the Pinlock® lens.
HOW TO INSTALL TEAR OFF
HOW TO INSTALL THE SPOILER EXTENSION
HOW TO REMOVE SPOILER EXTENSION
LINING SPECIFICATIONS
The lining of the helmet has the following characteristics:
- Removable,
- Anti-allergy
- Anti-sweat
This lining can be removed and washable, as shown in the picture.
If for some reason this lining is damage it can be easily replaced.
HOW TO REMOVE THE BREATH DEFLECTOR
HOW TO REMOVE THE CHIN DEFLECTOR
HOW TO PLACE THE BREATH DEFLECTOR
HOW TO PLACE THE CHIN DEFLECTOR
HOW TO REMOVE THE NECKROLL
HOW TO PLACE THE NECKROLL
HOW TO REMOVE CHINSTRAP COVER
HOW TO PLACE CHINSTRAP COVER
HOW TO REMOVE THE INNER LINING
HOW TO PLACE THE INNER LINING
ACCESSORIES
SIZE CHART
Wrap the flexible measuring tape around your head.
EMERGENCY SYSTEM
Emergency System to remove CheckPads in case of accident, will allow that the
helmet can be removed minimizing the risk of increasing/creating an injury to
the user;
USE THIS SYSTEM ONLY IN CASE OF AN EMERGENCY!
HOW TO ADJUST ERGOFIT ON TOP
HOW TO ADJUST ERGOFIT IN THE BACK
ERGO PADDING
The helmet size adjustment system using interior foams that allow a better filling according to the shape of the head;
HOW TO INSTALL SIDE ERGO PADDING
HELMET CARE
-
Light colors with matte finish require extra care as they are naturally more exposed to dust, fumes, compounds or other types of impurities.
-
THIS IS NOT COVERED UNDER WARRANTY!
Neon colors will fade when subjected to prolonged UV rays exposure. -
THIS IS NOT COVERED UNDER WARRANTY!
We are not liable for any damage, loss or detriment resulting from faulty assembly of any accessory. -
Do not expose the helmet to any type of liquid solvent;
-
The helmet should be handled with care. Leaving it drops can damage the painting as well as reduce their characteristics of protection.
THIS NOT COVERED UNDER WARRANTY -
Keep the helmet in a safe place (not hang on the mirror of motorcycle or other support than can damage the lining). Do not carry your helmet on the biker or in the arm while driving.
-
Always use the helmet in the proper position, using the buckle to adjust to the head;
In order to maintain trouble free operation of the visor, it is advisable to
periodically lubricate the mechanisms and rubber parts around the visor with
silicone oil.
The application may be made with a brush or with the help of a cotton swab.
Apply sparingly and remove the excess with a dry clean cloth. This proper care
will maintain the softness of the rubber seal and will dramatically increase
the durability of the visor fixing mechanism.
This hight quality helmet is made with the most advanced European technology. The helmets are technologically advanced for the motorcycle rider´s protections, which are made for motorcycle riding only. This helmet specifications is subject to change without notice.
Nexxpro Fábrica de Capacetes S. A.
Zona insdustrial de Amoreira da Gândara, lote nº11 3780-024 Amoreira da
Gândara,Anadia – PORTUGAL
nexx@nexxpro.com
www.nexx-helmets.com